You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
694 lines
17 KiB
694 lines
17 KiB
/* |
|
* Generic driver for memory-mapped GPIO controllers. |
|
* |
|
* Copyright 2008 MontaVista Software, Inc. |
|
* Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com> |
|
* |
|
* This program is free software; you can redistribute it and/or modify it |
|
* under the terms of the GNU General Public License as published by the |
|
* Free Software Foundation; either version 2 of the License, or (at your |
|
* option) any later version. |
|
* |
|
* ....``.```~~~~````.`.`.`.`.```````'',,,.........`````......`....... |
|
* ...`` ```````.. |
|
* ..The simplest form of a GPIO controller that the driver supports is`` |
|
* `.just a single "data" register, where GPIO state can be read and/or ` |
|
* `,..written. ,,..``~~~~ .....``.`.`.~~.```.`.........``````.``````` |
|
* ````````` |
|
___ |
|
_/~~|___/~| . ```~~~~~~ ___/___\___ ,~.`.`.`.`````.~~...,,,,... |
|
__________|~$@~~~ %~ /o*o*o*o*o*o\ .. Implementing such a GPIO . |
|
o ` ~~~~\___/~~~~ ` controller in FPGA is ,.` |
|
`....trivial..'~`.```.``` |
|
* ``````` |
|
* .```````~~~~`..`.``.``. |
|
* . The driver supports `... ,..```.`~~~```````````````....````.``,, |
|
* . big-endian notation, just`. .. A bit more sophisticated controllers , |
|
* . register the device with -be`. .with a pair of set/clear-bit registers , |
|
* `.. suffix. ```~~`````....`.` . affecting the data register and the .` |
|
* ``.`.``...``` ```.. output pins are also supported.` |
|
* ^^ `````.`````````.,``~``~``~~`````` |
|
* . ^^ |
|
* ,..`.`.`...````````````......`.`.`.`.`.`..`.`.`.. |
|
* .. The expectation is that in at least some cases . ,-~~~-, |
|
* .this will be used with roll-your-own ASIC/FPGA .` \ / |
|
* .logic in Verilog or VHDL. ~~~`````````..`````~~` \ / |
|
* ..````````......``````````` \o_ |
|
* | |
|
* ^^ / \ |
|
* |
|
* ...`````~~`.....``.`..........``````.`.``.```........``. |
|
* ` 8, 16, 32 and 64 bits registers are supported, and``. |
|
* . the number of GPIOs is determined by the width of ~ |
|
* .. the registers. ,............```.`.`..`.`.~~~.`.`.`~ |
|
* `.......````.``` |
|
*/ |
|
|
|
#include <linux/init.h> |
|
#include <linux/err.h> |
|
#include <linux/bug.h> |
|
#include <linux/kernel.h> |
|
#include <linux/module.h> |
|
#include <linux/spinlock.h> |
|
#include <linux/compiler.h> |
|
#include <linux/types.h> |
|
#include <linux/errno.h> |
|
#include <linux/log2.h> |
|
#include <linux/ioport.h> |
|
#include <linux/io.h> |
|
#include <linux/gpio.h> |
|
#include <linux/slab.h> |
|
#include <linux/platform_device.h> |
|
#include <linux/mod_devicetable.h> |
|
#include <linux/basic_mmio_gpio.h> |
|
|
|
static void bgpio_write8(void __iomem *reg, unsigned long data) |
|
{ |
|
writeb(data, reg); |
|
} |
|
|
|
static unsigned long bgpio_read8(void __iomem *reg) |
|
{ |
|
return readb(reg); |
|
} |
|
|
|
static void bgpio_write16(void __iomem *reg, unsigned long data) |
|
{ |
|
writew(data, reg); |
|
} |
|
|
|
static unsigned long bgpio_read16(void __iomem *reg) |
|
{ |
|
return readw(reg); |
|
} |
|
|
|
static void bgpio_write32(void __iomem *reg, unsigned long data) |
|
{ |
|
writel(data, reg); |
|
} |
|
|
|
static unsigned long bgpio_read32(void __iomem *reg) |
|
{ |
|
return readl(reg); |
|
} |
|
|
|
#if BITS_PER_LONG >= 64 |
|
static void bgpio_write64(void __iomem *reg, unsigned long data) |
|
{ |
|
writeq(data, reg); |
|
} |
|
|
|
static unsigned long bgpio_read64(void __iomem *reg) |
|
{ |
|
return readq(reg); |
|
} |
|
#endif /* BITS_PER_LONG >= 64 */ |
|
|
|
static void bgpio_write16be(void __iomem *reg, unsigned long data) |
|
{ |
|
iowrite16be(data, reg); |
|
} |
|
|
|
static unsigned long bgpio_read16be(void __iomem *reg) |
|
{ |
|
return ioread16be(reg); |
|
} |
|
|
|
static void bgpio_write32be(void __iomem *reg, unsigned long data) |
|
{ |
|
iowrite32be(data, reg); |
|
} |
|
|
|
static unsigned long bgpio_read32be(void __iomem *reg) |
|
{ |
|
return ioread32be(reg); |
|
} |
|
|
|
static unsigned long bgpio_pin2mask(struct bgpio_chip *bgc, unsigned int pin) |
|
{ |
|
return 1 << pin; |
|
} |
|
|
|
static unsigned long bgpio_pin2mask_be(struct bgpio_chip *bgc, |
|
unsigned int pin) |
|
{ |
|
return 1 << (bgc->bits - 1 - pin); |
|
} |
|
|
|
static int bgpio_get_set(struct gpio_chip *gc, unsigned int gpio) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
unsigned long pinmask = bgc->pin2mask(bgc, gpio); |
|
|
|
if (bgc->dir & pinmask) |
|
return !!(bgc->read_reg(bgc->reg_set) & pinmask); |
|
else |
|
return !!(bgc->read_reg(bgc->reg_dat) & pinmask); |
|
} |
|
|
|
static int bgpio_get(struct gpio_chip *gc, unsigned int gpio) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
|
|
return !!(bgc->read_reg(bgc->reg_dat) & bgc->pin2mask(bgc, gpio)); |
|
} |
|
|
|
static void bgpio_set_none(struct gpio_chip *gc, unsigned int gpio, int val) |
|
{ |
|
} |
|
|
|
static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
unsigned long mask = bgc->pin2mask(bgc, gpio); |
|
unsigned long flags; |
|
|
|
spin_lock_irqsave(&bgc->lock, flags); |
|
|
|
if (val) |
|
bgc->data |= mask; |
|
else |
|
bgc->data &= ~mask; |
|
|
|
bgc->write_reg(bgc->reg_dat, bgc->data); |
|
|
|
spin_unlock_irqrestore(&bgc->lock, flags); |
|
} |
|
|
|
static void bgpio_set_with_clear(struct gpio_chip *gc, unsigned int gpio, |
|
int val) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
unsigned long mask = bgc->pin2mask(bgc, gpio); |
|
|
|
if (val) |
|
bgc->write_reg(bgc->reg_set, mask); |
|
else |
|
bgc->write_reg(bgc->reg_clr, mask); |
|
} |
|
|
|
static void bgpio_set_set(struct gpio_chip *gc, unsigned int gpio, int val) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
unsigned long mask = bgc->pin2mask(bgc, gpio); |
|
unsigned long flags; |
|
|
|
spin_lock_irqsave(&bgc->lock, flags); |
|
|
|
if (val) |
|
bgc->data |= mask; |
|
else |
|
bgc->data &= ~mask; |
|
|
|
bgc->write_reg(bgc->reg_set, bgc->data); |
|
|
|
spin_unlock_irqrestore(&bgc->lock, flags); |
|
} |
|
|
|
static void bgpio_multiple_get_masks(struct bgpio_chip *bgc, |
|
unsigned long *mask, unsigned long *bits, |
|
unsigned long *set_mask, |
|
unsigned long *clear_mask) |
|
{ |
|
int i; |
|
|
|
*set_mask = 0; |
|
*clear_mask = 0; |
|
|
|
for (i = 0; i < bgc->bits; i++) { |
|
if (*mask == 0) |
|
break; |
|
if (__test_and_clear_bit(i, mask)) { |
|
if (test_bit(i, bits)) |
|
*set_mask |= bgc->pin2mask(bgc, i); |
|
else |
|
*clear_mask |= bgc->pin2mask(bgc, i); |
|
} |
|
} |
|
} |
|
|
|
static void bgpio_set_multiple_single_reg(struct bgpio_chip *bgc, |
|
unsigned long *mask, |
|
unsigned long *bits, |
|
void __iomem *reg) |
|
{ |
|
unsigned long flags; |
|
unsigned long set_mask, clear_mask; |
|
|
|
spin_lock_irqsave(&bgc->lock, flags); |
|
|
|
bgpio_multiple_get_masks(bgc, mask, bits, &set_mask, &clear_mask); |
|
|
|
bgc->data |= set_mask; |
|
bgc->data &= ~clear_mask; |
|
|
|
bgc->write_reg(reg, bgc->data); |
|
|
|
spin_unlock_irqrestore(&bgc->lock, flags); |
|
} |
|
|
|
static void bgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, |
|
unsigned long *bits) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
|
|
bgpio_set_multiple_single_reg(bgc, mask, bits, bgc->reg_dat); |
|
} |
|
|
|
static void bgpio_set_multiple_set(struct gpio_chip *gc, unsigned long *mask, |
|
unsigned long *bits) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
|
|
bgpio_set_multiple_single_reg(bgc, mask, bits, bgc->reg_set); |
|
} |
|
|
|
static void bgpio_set_multiple_with_clear(struct gpio_chip *gc, |
|
unsigned long *mask, |
|
unsigned long *bits) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
unsigned long set_mask, clear_mask; |
|
|
|
bgpio_multiple_get_masks(bgc, mask, bits, &set_mask, &clear_mask); |
|
|
|
if (set_mask) |
|
bgc->write_reg(bgc->reg_set, set_mask); |
|
if (clear_mask) |
|
bgc->write_reg(bgc->reg_clr, clear_mask); |
|
} |
|
|
|
static int bgpio_simple_dir_in(struct gpio_chip *gc, unsigned int gpio) |
|
{ |
|
return 0; |
|
} |
|
|
|
static int bgpio_dir_out_err(struct gpio_chip *gc, unsigned int gpio, |
|
int val) |
|
{ |
|
return -EINVAL; |
|
} |
|
|
|
static int bgpio_simple_dir_out(struct gpio_chip *gc, unsigned int gpio, |
|
int val) |
|
{ |
|
gc->set(gc, gpio, val); |
|
|
|
return 0; |
|
} |
|
|
|
static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
unsigned long flags; |
|
|
|
spin_lock_irqsave(&bgc->lock, flags); |
|
|
|
bgc->dir &= ~bgc->pin2mask(bgc, gpio); |
|
bgc->write_reg(bgc->reg_dir, bgc->dir); |
|
|
|
spin_unlock_irqrestore(&bgc->lock, flags); |
|
|
|
return 0; |
|
} |
|
|
|
static int bgpio_get_dir(struct gpio_chip *gc, unsigned int gpio) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
|
|
return (bgc->read_reg(bgc->reg_dir) & bgc->pin2mask(bgc, gpio)) ? |
|
GPIOF_DIR_OUT : GPIOF_DIR_IN; |
|
} |
|
|
|
static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
unsigned long flags; |
|
|
|
gc->set(gc, gpio, val); |
|
|
|
spin_lock_irqsave(&bgc->lock, flags); |
|
|
|
bgc->dir |= bgc->pin2mask(bgc, gpio); |
|
bgc->write_reg(bgc->reg_dir, bgc->dir); |
|
|
|
spin_unlock_irqrestore(&bgc->lock, flags); |
|
|
|
return 0; |
|
} |
|
|
|
static int bgpio_dir_in_inv(struct gpio_chip *gc, unsigned int gpio) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
unsigned long flags; |
|
|
|
spin_lock_irqsave(&bgc->lock, flags); |
|
|
|
bgc->dir |= bgc->pin2mask(bgc, gpio); |
|
bgc->write_reg(bgc->reg_dir, bgc->dir); |
|
|
|
spin_unlock_irqrestore(&bgc->lock, flags); |
|
|
|
return 0; |
|
} |
|
|
|
static int bgpio_dir_out_inv(struct gpio_chip *gc, unsigned int gpio, int val) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
unsigned long flags; |
|
|
|
gc->set(gc, gpio, val); |
|
|
|
spin_lock_irqsave(&bgc->lock, flags); |
|
|
|
bgc->dir &= ~bgc->pin2mask(bgc, gpio); |
|
bgc->write_reg(bgc->reg_dir, bgc->dir); |
|
|
|
spin_unlock_irqrestore(&bgc->lock, flags); |
|
|
|
return 0; |
|
} |
|
|
|
static int bgpio_get_dir_inv(struct gpio_chip *gc, unsigned int gpio) |
|
{ |
|
struct bgpio_chip *bgc = to_bgpio_chip(gc); |
|
|
|
return (bgc->read_reg(bgc->reg_dir) & bgc->pin2mask(bgc, gpio)) ? |
|
GPIOF_DIR_IN : GPIOF_DIR_OUT; |
|
} |
|
|
|
static int bgpio_setup_accessors(struct device *dev, |
|
struct bgpio_chip *bgc, |
|
bool bit_be, |
|
bool byte_be) |
|
{ |
|
|
|
switch (bgc->bits) { |
|
case 8: |
|
bgc->read_reg = bgpio_read8; |
|
bgc->write_reg = bgpio_write8; |
|
break; |
|
case 16: |
|
if (byte_be) { |
|
bgc->read_reg = bgpio_read16be; |
|
bgc->write_reg = bgpio_write16be; |
|
} else { |
|
bgc->read_reg = bgpio_read16; |
|
bgc->write_reg = bgpio_write16; |
|
} |
|
break; |
|
case 32: |
|
if (byte_be) { |
|
bgc->read_reg = bgpio_read32be; |
|
bgc->write_reg = bgpio_write32be; |
|
} else { |
|
bgc->read_reg = bgpio_read32; |
|
bgc->write_reg = bgpio_write32; |
|
} |
|
break; |
|
#if BITS_PER_LONG >= 64 |
|
case 64: |
|
if (byte_be) { |
|
dev_err(dev, |
|
"64 bit big endian byte order unsupported\n"); |
|
return -EINVAL; |
|
} else { |
|
bgc->read_reg = bgpio_read64; |
|
bgc->write_reg = bgpio_write64; |
|
} |
|
break; |
|
#endif /* BITS_PER_LONG >= 64 */ |
|
default: |
|
dev_err(dev, "unsupported data width %u bits\n", bgc->bits); |
|
return -EINVAL; |
|
} |
|
|
|
bgc->pin2mask = bit_be ? bgpio_pin2mask_be : bgpio_pin2mask; |
|
|
|
return 0; |
|
} |
|
|
|
/* |
|
* Create the device and allocate the resources. For setting GPIO's there are |
|
* three supported configurations: |
|
* |
|
* - single input/output register resource (named "dat"). |
|
* - set/clear pair (named "set" and "clr"). |
|
* - single output register resource and single input resource ("set" and |
|
* dat"). |
|
* |
|
* For the single output register, this drives a 1 by setting a bit and a zero |
|
* by clearing a bit. For the set clr pair, this drives a 1 by setting a bit |
|
* in the set register and clears it by setting a bit in the clear register. |
|
* The configuration is detected by which resources are present. |
|
* |
|
* For setting the GPIO direction, there are three supported configurations: |
|
* |
|
* - simple bidirection GPIO that requires no configuration. |
|
* - an output direction register (named "dirout") where a 1 bit |
|
* indicates the GPIO is an output. |
|
* - an input direction register (named "dirin") where a 1 bit indicates |
|
* the GPIO is an input. |
|
*/ |
|
static int bgpio_setup_io(struct bgpio_chip *bgc, |
|
void __iomem *dat, |
|
void __iomem *set, |
|
void __iomem *clr, |
|
unsigned long flags) |
|
{ |
|
|
|
bgc->reg_dat = dat; |
|
if (!bgc->reg_dat) |
|
return -EINVAL; |
|
|
|
if (set && clr) { |
|
bgc->reg_set = set; |
|
bgc->reg_clr = clr; |
|
bgc->gc.set = bgpio_set_with_clear; |
|
bgc->gc.set_multiple = bgpio_set_multiple_with_clear; |
|
} else if (set && !clr) { |
|
bgc->reg_set = set; |
|
bgc->gc.set = bgpio_set_set; |
|
bgc->gc.set_multiple = bgpio_set_multiple_set; |
|
} else if (flags & BGPIOF_NO_OUTPUT) { |
|
bgc->gc.set = bgpio_set_none; |
|
bgc->gc.set_multiple = NULL; |
|
} else { |
|
bgc->gc.set = bgpio_set; |
|
bgc->gc.set_multiple = bgpio_set_multiple; |
|
} |
|
|
|
if (!(flags & BGPIOF_UNREADABLE_REG_SET) && |
|
(flags & BGPIOF_READ_OUTPUT_REG_SET)) |
|
bgc->gc.get = bgpio_get_set; |
|
else |
|
bgc->gc.get = bgpio_get; |
|
|
|
return 0; |
|
} |
|
|
|
static int bgpio_setup_direction(struct bgpio_chip *bgc, |
|
void __iomem *dirout, |
|
void __iomem *dirin, |
|
unsigned long flags) |
|
{ |
|
if (dirout && dirin) { |
|
return -EINVAL; |
|
} else if (dirout) { |
|
bgc->reg_dir = dirout; |
|
bgc->gc.direction_output = bgpio_dir_out; |
|
bgc->gc.direction_input = bgpio_dir_in; |
|
bgc->gc.get_direction = bgpio_get_dir; |
|
} else if (dirin) { |
|
bgc->reg_dir = dirin; |
|
bgc->gc.direction_output = bgpio_dir_out_inv; |
|
bgc->gc.direction_input = bgpio_dir_in_inv; |
|
bgc->gc.get_direction = bgpio_get_dir_inv; |
|
} else { |
|
if (flags & BGPIOF_NO_OUTPUT) |
|
bgc->gc.direction_output = bgpio_dir_out_err; |
|
else |
|
bgc->gc.direction_output = bgpio_simple_dir_out; |
|
bgc->gc.direction_input = bgpio_simple_dir_in; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int bgpio_request(struct gpio_chip *chip, unsigned gpio_pin) |
|
{ |
|
if (gpio_pin < chip->ngpio) |
|
return 0; |
|
|
|
return -EINVAL; |
|
} |
|
|
|
int bgpio_remove(struct bgpio_chip *bgc) |
|
{ |
|
gpiochip_remove(&bgc->gc); |
|
return 0; |
|
} |
|
EXPORT_SYMBOL_GPL(bgpio_remove); |
|
|
|
int bgpio_init(struct bgpio_chip *bgc, struct device *dev, |
|
unsigned long sz, void __iomem *dat, void __iomem *set, |
|
void __iomem *clr, void __iomem *dirout, void __iomem *dirin, |
|
unsigned long flags) |
|
{ |
|
int ret; |
|
|
|
if (!is_power_of_2(sz)) |
|
return -EINVAL; |
|
|
|
bgc->bits = sz * 8; |
|
if (bgc->bits > BITS_PER_LONG) |
|
return -EINVAL; |
|
|
|
spin_lock_init(&bgc->lock); |
|
bgc->gc.dev = dev; |
|
bgc->gc.label = dev_name(dev); |
|
bgc->gc.base = -1; |
|
bgc->gc.ngpio = bgc->bits; |
|
bgc->gc.request = bgpio_request; |
|
|
|
ret = bgpio_setup_io(bgc, dat, set, clr, flags); |
|
if (ret) |
|
return ret; |
|
|
|
ret = bgpio_setup_accessors(dev, bgc, flags & BGPIOF_BIG_ENDIAN, |
|
flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER); |
|
if (ret) |
|
return ret; |
|
|
|
ret = bgpio_setup_direction(bgc, dirout, dirin, flags); |
|
if (ret) |
|
return ret; |
|
|
|
bgc->data = bgc->read_reg(bgc->reg_dat); |
|
if (bgc->gc.set == bgpio_set_set && |
|
!(flags & BGPIOF_UNREADABLE_REG_SET)) |
|
bgc->data = bgc->read_reg(bgc->reg_set); |
|
if (bgc->reg_dir && !(flags & BGPIOF_UNREADABLE_REG_DIR)) |
|
bgc->dir = bgc->read_reg(bgc->reg_dir); |
|
|
|
return ret; |
|
} |
|
EXPORT_SYMBOL_GPL(bgpio_init); |
|
|
|
#ifdef CONFIG_GPIO_GENERIC_PLATFORM |
|
|
|
static void __iomem *bgpio_map(struct platform_device *pdev, |
|
const char *name, |
|
resource_size_t sane_sz) |
|
{ |
|
struct resource *r; |
|
resource_size_t sz; |
|
|
|
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); |
|
if (!r) |
|
return NULL; |
|
|
|
sz = resource_size(r); |
|
if (sz != sane_sz) |
|
return IOMEM_ERR_PTR(-EINVAL); |
|
|
|
return devm_ioremap_resource(&pdev->dev, r); |
|
} |
|
|
|
static int bgpio_pdev_probe(struct platform_device *pdev) |
|
{ |
|
struct device *dev = &pdev->dev; |
|
struct resource *r; |
|
void __iomem *dat; |
|
void __iomem *set; |
|
void __iomem *clr; |
|
void __iomem *dirout; |
|
void __iomem *dirin; |
|
unsigned long sz; |
|
unsigned long flags = pdev->id_entry->driver_data; |
|
int err; |
|
struct bgpio_chip *bgc; |
|
struct bgpio_pdata *pdata = dev_get_platdata(dev); |
|
|
|
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat"); |
|
if (!r) |
|
return -EINVAL; |
|
|
|
sz = resource_size(r); |
|
|
|
dat = bgpio_map(pdev, "dat", sz); |
|
if (IS_ERR(dat)) |
|
return PTR_ERR(dat); |
|
|
|
set = bgpio_map(pdev, "set", sz); |
|
if (IS_ERR(set)) |
|
return PTR_ERR(set); |
|
|
|
clr = bgpio_map(pdev, "clr", sz); |
|
if (IS_ERR(clr)) |
|
return PTR_ERR(clr); |
|
|
|
dirout = bgpio_map(pdev, "dirout", sz); |
|
if (IS_ERR(dirout)) |
|
return PTR_ERR(dirout); |
|
|
|
dirin = bgpio_map(pdev, "dirin", sz); |
|
if (IS_ERR(dirin)) |
|
return PTR_ERR(dirin); |
|
|
|
bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL); |
|
if (!bgc) |
|
return -ENOMEM; |
|
|
|
err = bgpio_init(bgc, dev, sz, dat, set, clr, dirout, dirin, flags); |
|
if (err) |
|
return err; |
|
|
|
if (pdata) { |
|
if (pdata->label) |
|
bgc->gc.label = pdata->label; |
|
bgc->gc.base = pdata->base; |
|
if (pdata->ngpio > 0) |
|
bgc->gc.ngpio = pdata->ngpio; |
|
} |
|
|
|
platform_set_drvdata(pdev, bgc); |
|
|
|
return gpiochip_add(&bgc->gc); |
|
} |
|
|
|
static int bgpio_pdev_remove(struct platform_device *pdev) |
|
{ |
|
struct bgpio_chip *bgc = platform_get_drvdata(pdev); |
|
|
|
return bgpio_remove(bgc); |
|
} |
|
|
|
static const struct platform_device_id bgpio_id_table[] = { |
|
{ |
|
.name = "basic-mmio-gpio", |
|
.driver_data = 0, |
|
}, { |
|
.name = "basic-mmio-gpio-be", |
|
.driver_data = BGPIOF_BIG_ENDIAN, |
|
}, |
|
{ } |
|
}; |
|
MODULE_DEVICE_TABLE(platform, bgpio_id_table); |
|
|
|
static struct platform_driver bgpio_driver = { |
|
.driver = { |
|
.name = "basic-mmio-gpio", |
|
}, |
|
.id_table = bgpio_id_table, |
|
.probe = bgpio_pdev_probe, |
|
.remove = bgpio_pdev_remove, |
|
}; |
|
|
|
module_platform_driver(bgpio_driver); |
|
|
|
#endif /* CONFIG_GPIO_GENERIC_PLATFORM */ |
|
|
|
MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers"); |
|
MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>"); |
|
MODULE_LICENSE("GPL");
|
|
|