You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
121 lines
4.4 KiB
121 lines
4.4 KiB
/* |
|
* ipmi_smi.h |
|
* |
|
* MontaVista IPMI system management interface |
|
* |
|
* Author: MontaVista Software, Inc. |
|
* Corey Minyard <minyard@mvista.com> |
|
* source@mvista.com |
|
* |
|
* Copyright 2002 MontaVista Software Inc. |
|
* |
|
* This program is free software; you can redistribute it and/or modify it |
|
* under the terms of the GNU General Public License as published by the |
|
* Free Software Foundation; either version 2 of the License, or (at your |
|
* option) any later version. |
|
* |
|
* |
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
|
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
|
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
* |
|
* You should have received a copy of the GNU General Public License along |
|
* with this program; if not, write to the Free Software Foundation, Inc., |
|
* 675 Mass Ave, Cambridge, MA 02139, USA. |
|
*/ |
|
|
|
#ifndef __LINUX_IPMI_MSGDEFS_H |
|
#define __LINUX_IPMI_MSGDEFS_H |
|
|
|
/* Various definitions for IPMI messages used by almost everything in |
|
the IPMI stack. */ |
|
|
|
/* NetFNs and commands used inside the IPMI stack. */ |
|
|
|
#define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04 |
|
#define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05 |
|
#define IPMI_GET_EVENT_RECEIVER_CMD 0x01 |
|
|
|
#define IPMI_NETFN_APP_REQUEST 0x06 |
|
#define IPMI_NETFN_APP_RESPONSE 0x07 |
|
#define IPMI_GET_DEVICE_ID_CMD 0x01 |
|
#define IPMI_COLD_RESET_CMD 0x02 |
|
#define IPMI_WARM_RESET_CMD 0x03 |
|
#define IPMI_CLEAR_MSG_FLAGS_CMD 0x30 |
|
#define IPMI_GET_DEVICE_GUID_CMD 0x08 |
|
#define IPMI_GET_MSG_FLAGS_CMD 0x31 |
|
#define IPMI_SEND_MSG_CMD 0x34 |
|
#define IPMI_GET_MSG_CMD 0x33 |
|
#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e |
|
#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f |
|
#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 |
|
#define IPMI_GET_CHANNEL_INFO_CMD 0x42 |
|
|
|
/* Bit for BMC global enables. */ |
|
#define IPMI_BMC_RCV_MSG_INTR 0x01 |
|
#define IPMI_BMC_EVT_MSG_INTR 0x02 |
|
#define IPMI_BMC_EVT_MSG_BUFF 0x04 |
|
#define IPMI_BMC_SYS_LOG 0x08 |
|
|
|
#define IPMI_NETFN_STORAGE_REQUEST 0x0a |
|
#define IPMI_NETFN_STORAGE_RESPONSE 0x0b |
|
#define IPMI_ADD_SEL_ENTRY_CMD 0x44 |
|
|
|
#define IPMI_NETFN_FIRMWARE_REQUEST 0x08 |
|
#define IPMI_NETFN_FIRMWARE_RESPONSE 0x09 |
|
|
|
/* The default slave address */ |
|
#define IPMI_BMC_SLAVE_ADDR 0x20 |
|
|
|
/* The BT interface on high-end HP systems supports up to 255 bytes in |
|
* one transfer. Its "virtual" BMC supports some commands that are longer |
|
* than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus |
|
* some overhead; it's not worth the effort to dynamically size this based |
|
* on the results of the "Get BT Capabilities" command. */ |
|
#define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */ |
|
|
|
#define IPMI_CC_NO_ERROR 0x00 |
|
#define IPMI_NODE_BUSY_ERR 0xc0 |
|
#define IPMI_INVALID_COMMAND_ERR 0xc1 |
|
#define IPMI_TIMEOUT_ERR 0xc3 |
|
#define IPMI_ERR_MSG_TRUNCATED 0xc6 |
|
#define IPMI_REQ_LEN_INVALID_ERR 0xc7 |
|
#define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8 |
|
#define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */ |
|
#define IPMI_LOST_ARBITRATION_ERR 0x81 |
|
#define IPMI_BUS_ERR 0x82 |
|
#define IPMI_NAK_ON_WRITE_ERR 0x83 |
|
#define IPMI_ERR_UNSPECIFIED 0xff |
|
|
|
#define IPMI_CHANNEL_PROTOCOL_IPMB 1 |
|
#define IPMI_CHANNEL_PROTOCOL_ICMB 2 |
|
#define IPMI_CHANNEL_PROTOCOL_SMBUS 4 |
|
#define IPMI_CHANNEL_PROTOCOL_KCS 5 |
|
#define IPMI_CHANNEL_PROTOCOL_SMIC 6 |
|
#define IPMI_CHANNEL_PROTOCOL_BT10 7 |
|
#define IPMI_CHANNEL_PROTOCOL_BT15 8 |
|
#define IPMI_CHANNEL_PROTOCOL_TMODE 9 |
|
|
|
#define IPMI_CHANNEL_MEDIUM_IPMB 1 |
|
#define IPMI_CHANNEL_MEDIUM_ICMB10 2 |
|
#define IPMI_CHANNEL_MEDIUM_ICMB09 3 |
|
#define IPMI_CHANNEL_MEDIUM_8023LAN 4 |
|
#define IPMI_CHANNEL_MEDIUM_ASYNC 5 |
|
#define IPMI_CHANNEL_MEDIUM_OTHER_LAN 6 |
|
#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS 7 |
|
#define IPMI_CHANNEL_MEDIUM_SMBUS1 8 |
|
#define IPMI_CHANNEL_MEDIUM_SMBUS2 9 |
|
#define IPMI_CHANNEL_MEDIUM_USB1 10 |
|
#define IPMI_CHANNEL_MEDIUM_USB2 11 |
|
#define IPMI_CHANNEL_MEDIUM_SYSINTF 12 |
|
#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60 |
|
#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f |
|
|
|
#endif /* __LINUX_IPMI_MSGDEFS_H */
|
|
|