You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
64 lines
3.1 KiB
64 lines
3.1 KiB
fmc-chardev |
|
=========== |
|
|
|
This is a simple generic driver, that allows user access by means of a |
|
character device (actually, one for each mezzanine it takes hold of). |
|
|
|
The char device is created as a misc device. Its name in /dev (as |
|
created by udev) is the same name as the underlying FMC device. Thus, |
|
the name can be a silly fmc-0000 look-alike if the device has no |
|
identifiers nor bus_id, a more specific fmc-0400 if the device has a |
|
bus-specific address but no associated name, or something like |
|
fdelay-0400 if the FMC core can rely on both a mezzanine name and a bus |
|
address. |
|
|
|
Currently the driver only supports read and write: you can lseek to the |
|
desired address and read or write a register. |
|
|
|
The driver assumes all registers are 32-bit in size, and only accepts a |
|
single read or write per system call. However, as a result of Unix read |
|
and write semantics, users can simply fread or fwrite bigger areas in |
|
order to dump or store bigger memory areas. |
|
|
|
There is currently no support for mmap, user-space interrupt management |
|
and DMA buffers. They may be added in later versions, if the need |
|
arises. |
|
|
|
The example below shows raw access to a SPEC card programmed with its |
|
golden FPGA file, that features an SDB structure at offset 256 - i.e. |
|
64 words. The mezzanine's EEPROM in this case is not programmed, so the |
|
default name is fmc-<bus><devfn>, and there are two cards in the system: |
|
|
|
spusa.root# insmod fmc-chardev.ko |
|
[ 1073.339332] spec 0000:02:00.0: Driver has no ID: matches all |
|
[ 1073.345051] spec 0000:02:00.0: Created misc device "fmc-0200" |
|
[ 1073.350821] spec 0000:04:00.0: Driver has no ID: matches all |
|
[ 1073.356525] spec 0000:04:00.0: Created misc device "fmc-0400" |
|
spusa.root# ls -l /dev/fmc* |
|
crw------- 1 root root 10, 58 Nov 20 19:23 /dev/fmc-0200 |
|
crw------- 1 root root 10, 57 Nov 20 19:23 /dev/fmc-0400 |
|
spusa.root# dd bs=4 skip=64 count=1 if=/dev/fmc-0200 2> /dev/null | od -t x1z |
|
0000000 2d 42 44 53 >-BDS< |
|
0000004 |
|
|
|
The simple program tools/fmc-mem in this package can access an FMC char |
|
device and read or write a word or a whole area. Actually, the program |
|
is not specific to FMC at all, it just uses lseek, read and write. |
|
|
|
Its first argument is the device name, the second the offset, the third |
|
(if any) the value to write and the optional last argument that must |
|
begin with "+" is the number of bytes to read or write. In case of |
|
repeated reading data is written to stdout; repeated writes read from |
|
stdin and the value argument is ignored. |
|
|
|
The following examples show reading the SDB magic number and the first |
|
SDB record from a SPEC device programmed with its golden image: |
|
|
|
spusa.root# ./fmc-mem /dev/fmc-0200 100 |
|
5344422d |
|
spusa.root# ./fmc-mem /dev/fmc-0200 100 +40 | od -Ax -t x1z |
|
000000 2d 42 44 53 00 01 02 00 00 00 00 00 00 00 00 00 >-BDS............< |
|
000010 00 00 00 00 ff 01 00 00 00 00 00 00 51 06 00 00 >............Q...< |
|
000020 c9 42 a5 e6 02 00 00 00 11 05 12 20 2d 34 42 57 >.B......... -4BW< |
|
000030 73 6f 72 43 72 61 62 73 49 53 47 2d 00 20 20 20 >sorCrabsISG-. < |
|
000040
|
|
|