You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
411 lines
11 KiB
411 lines
11 KiB
menuconfig POWER_SUPPLY |
|
bool "Power supply class support" |
|
help |
|
Say Y here to enable power supply class support. This allows |
|
power supply (batteries, AC, USB) monitoring by userspace |
|
via sysfs and uevent (if available) and/or APM kernel interface |
|
(if selected below). |
|
|
|
if POWER_SUPPLY |
|
|
|
config POWER_SUPPLY_DEBUG |
|
bool "Power supply debug" |
|
help |
|
Say Y here to enable debugging messages for power supply class |
|
and drivers. |
|
|
|
config PDA_POWER |
|
tristate "Generic PDA/phone power driver" |
|
depends on !S390 |
|
help |
|
Say Y here to enable generic power driver for PDAs and phones with |
|
one or two external power supplies (AC/USB) connected to main and |
|
backup batteries, and optional builtin charger. |
|
|
|
config APM_POWER |
|
tristate "APM emulation for class batteries" |
|
depends on APM_EMULATION |
|
help |
|
Say Y here to enable support APM status emulation using |
|
battery class devices. |
|
|
|
config GENERIC_ADC_BATTERY |
|
tristate "Generic battery support using IIO" |
|
depends on IIO |
|
help |
|
Say Y here to enable support for the generic battery driver |
|
which uses IIO framework to read adc. |
|
|
|
config MAX8925_POWER |
|
tristate "MAX8925 battery charger support" |
|
depends on MFD_MAX8925 |
|
help |
|
Say Y here to enable support for the battery charger in the Maxim |
|
MAX8925 PMIC. |
|
|
|
config WM831X_BACKUP |
|
tristate "WM831X backup battery charger support" |
|
depends on MFD_WM831X |
|
help |
|
Say Y here to enable support for the backup battery charger |
|
in the Wolfson Microelectronics WM831x PMICs. |
|
|
|
config WM831X_POWER |
|
tristate "WM831X PMU support" |
|
depends on MFD_WM831X |
|
help |
|
Say Y here to enable support for the power management unit |
|
provided by Wolfson Microelectronics WM831x PMICs. |
|
|
|
config WM8350_POWER |
|
tristate "WM8350 PMU support" |
|
depends on MFD_WM8350 |
|
help |
|
Say Y here to enable support for the power management unit |
|
provided by the Wolfson Microelectronics WM8350 PMIC. |
|
|
|
config TEST_POWER |
|
tristate "Test power driver" |
|
help |
|
This driver is used for testing. It's safe to say M here. |
|
|
|
config BATTERY_88PM860X |
|
tristate "Marvell 88PM860x battery driver" |
|
depends on MFD_88PM860X |
|
help |
|
Say Y here to enable battery monitor for Marvell 88PM860x chip. |
|
|
|
config BATTERY_DS2760 |
|
tristate "DS2760 battery driver (HP iPAQ & others)" |
|
depends on W1 && W1_SLAVE_DS2760 |
|
help |
|
Say Y here to enable support for batteries with ds2760 chip. |
|
|
|
config BATTERY_DS2780 |
|
tristate "DS2780 battery driver" |
|
depends on HAS_IOMEM |
|
select W1 |
|
select W1_SLAVE_DS2780 |
|
help |
|
Say Y here to enable support for batteries with ds2780 chip. |
|
|
|
config BATTERY_DS2781 |
|
tristate "DS2781 battery driver" |
|
depends on HAS_IOMEM |
|
select W1 |
|
select W1_SLAVE_DS2781 |
|
help |
|
If you enable this you will have the DS2781 battery driver support. |
|
|
|
The battery monitor chip is used in many batteries/devices |
|
as the one who is responsible for charging/discharging/monitoring |
|
Li+ batteries. |
|
|
|
If you are unsure, say N. |
|
|
|
config BATTERY_DS2782 |
|
tristate "DS2782/DS2786 standalone gas-gauge" |
|
depends on I2C |
|
help |
|
Say Y here to enable support for the DS2782/DS2786 standalone battery |
|
gas-gauge. |
|
|
|
config BATTERY_PMU |
|
tristate "Apple PMU battery" |
|
depends on PPC32 && ADB_PMU |
|
help |
|
Say Y here to expose battery information on Apple machines |
|
through the generic battery class. |
|
|
|
config BATTERY_OLPC |
|
tristate "One Laptop Per Child battery" |
|
depends on X86_32 && OLPC |
|
help |
|
Say Y to enable support for the battery on the OLPC laptop. |
|
|
|
config BATTERY_TOSA |
|
tristate "Sharp SL-6000 (tosa) battery" |
|
depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX |
|
help |
|
Say Y to enable support for the battery on the Sharp Zaurus |
|
SL-6000 (tosa) models. |
|
|
|
config BATTERY_COLLIE |
|
tristate "Sharp SL-5500 (collie) battery" |
|
depends on SA1100_COLLIE && MCP_UCB1200 |
|
help |
|
Say Y to enable support for the battery on the Sharp Zaurus |
|
SL-5500 (collie) models. |
|
|
|
config BATTERY_IPAQ_MICRO |
|
tristate "iPAQ Atmel Micro ASIC battery driver" |
|
depends on MFD_IPAQ_MICRO |
|
help |
|
Choose this option if you want to monitor battery status on |
|
Compaq/HP iPAQ h3100 and h3600. |
|
|
|
config BATTERY_WM97XX |
|
bool "WM97xx generic battery driver" |
|
depends on TOUCHSCREEN_WM97XX=y |
|
help |
|
Say Y to enable support for battery measured by WM97xx aux port. |
|
|
|
config BATTERY_SBS |
|
tristate "SBS Compliant gas gauge" |
|
depends on I2C |
|
help |
|
Say Y to include support for SBS battery driver for SBS-compliant |
|
gas gauges. |
|
|
|
config BATTERY_BQ27x00 |
|
tristate "BQ27x00 battery driver" |
|
depends on I2C || I2C=n |
|
help |
|
Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips. |
|
|
|
config BATTERY_BQ27X00_I2C |
|
bool "BQ27200/BQ27500 support" |
|
depends on BATTERY_BQ27x00 |
|
depends on I2C |
|
default y |
|
help |
|
Say Y here to enable support for batteries with BQ27x00 (I2C) chips. |
|
|
|
config BATTERY_BQ27X00_PLATFORM |
|
bool "BQ27000 support" |
|
depends on BATTERY_BQ27x00 |
|
default y |
|
help |
|
Say Y here to enable support for batteries with BQ27000 (HDQ) chips. |
|
|
|
config BATTERY_DA9030 |
|
tristate "DA9030 battery driver" |
|
depends on PMIC_DA903X |
|
help |
|
Say Y here to enable support for batteries charger integrated into |
|
DA9030 PMIC. |
|
|
|
config BATTERY_DA9052 |
|
tristate "Dialog DA9052 Battery" |
|
depends on PMIC_DA9052 |
|
help |
|
Say Y here to enable support for batteries charger integrated into |
|
DA9052 PMIC. |
|
|
|
config BATTERY_MAX17040 |
|
tristate "Maxim MAX17040 Fuel Gauge" |
|
depends on I2C |
|
help |
|
MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries |
|
in handheld and portable equipment. The MAX17040 is configured |
|
to operate with a single lithium cell |
|
|
|
config BATTERY_MAX17042 |
|
tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries |
|
in handheld and portable equipment. The MAX17042 is configured |
|
to operate with a single lithium cell. MAX8997 and MAX8966 are |
|
multi-function devices that include fuel gauages that are compatible |
|
with MAX17042. This driver also supports max17047/50 chips which are |
|
improved version of max17042. |
|
|
|
config BATTERY_Z2 |
|
tristate "Z2 battery driver" |
|
depends on I2C && MACH_ZIPIT2 |
|
help |
|
Say Y to include support for the battery on the Zipit Z2. |
|
|
|
config BATTERY_S3C_ADC |
|
tristate "Battery driver for Samsung ADC based monitoring" |
|
depends on S3C_ADC |
|
help |
|
Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery |
|
|
|
config BATTERY_TWL4030_MADC |
|
tristate "TWL4030 MADC battery driver" |
|
depends on TWL4030_MADC |
|
help |
|
Say Y here to enable this dumb driver for batteries managed |
|
through the TWL4030 MADC. |
|
|
|
config CHARGER_88PM860X |
|
tristate "Marvell 88PM860x Charger driver" |
|
depends on MFD_88PM860X && BATTERY_88PM860X |
|
help |
|
Say Y here to enable charger for Marvell 88PM860x chip. |
|
|
|
config CHARGER_PCF50633 |
|
tristate "NXP PCF50633 MBC" |
|
depends on MFD_PCF50633 |
|
help |
|
Say Y to include support for NXP PCF50633 Main Battery Charger. |
|
|
|
config BATTERY_JZ4740 |
|
tristate "Ingenic JZ4740 battery" |
|
depends on MACH_JZ4740 |
|
depends on MFD_JZ4740_ADC |
|
help |
|
Say Y to enable support for the battery on Ingenic JZ4740 based |
|
boards. |
|
|
|
This driver can be build as a module. If so, the module will be |
|
called jz4740-battery. |
|
|
|
config BATTERY_INTEL_MID |
|
tristate "Battery driver for Intel MID platforms" |
|
depends on INTEL_SCU_IPC && SPI |
|
help |
|
Say Y here to enable the battery driver on Intel MID |
|
platforms. |
|
|
|
config BATTERY_RX51 |
|
tristate "Nokia RX-51 (N900) battery driver" |
|
depends on TWL4030_MADC |
|
help |
|
Say Y here to enable support for battery information on Nokia |
|
RX-51, also known as N900 tablet. |
|
|
|
config CHARGER_ISP1704 |
|
tristate "ISP1704 USB Charger Detection" |
|
depends on USB_PHY |
|
help |
|
Say Y to enable support for USB Charger Detection with |
|
ISP1707/ISP1704 USB transceivers. |
|
|
|
config CHARGER_MAX8903 |
|
tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" |
|
help |
|
Say Y to enable support for the MAX8903 DC-DC charger and sysfs. |
|
The driver supports controlling charger-enable and current-limit |
|
pins based on the status of charger connections with interrupt |
|
handlers. |
|
|
|
config CHARGER_TWL4030 |
|
tristate "OMAP TWL4030 BCI charger driver" |
|
depends on TWL4030_CORE |
|
help |
|
Say Y here to enable support for TWL4030 Battery Charge Interface. |
|
|
|
config CHARGER_LP8727 |
|
tristate "TI/National Semiconductor LP8727 charger driver" |
|
depends on I2C |
|
help |
|
Say Y here to enable support for LP8727 Charger Driver. |
|
|
|
config CHARGER_LP8788 |
|
tristate "TI LP8788 charger driver" |
|
depends on MFD_LP8788 |
|
depends on LP8788_ADC |
|
depends on IIO |
|
help |
|
Say Y to enable support for the LP8788 linear charger. |
|
|
|
config CHARGER_GPIO |
|
tristate "GPIO charger" |
|
depends on GPIOLIB |
|
help |
|
Say Y to include support for chargers which report their online status |
|
through a GPIO pin. |
|
|
|
This driver can be build as a module. If so, the module will be |
|
called gpio-charger. |
|
|
|
config CHARGER_MANAGER |
|
bool "Battery charger manager for multiple chargers" |
|
depends on REGULATOR && RTC_CLASS |
|
select EXTCON |
|
help |
|
Say Y to enable charger-manager support, which allows multiple |
|
chargers attached to a battery and multiple batteries attached to a |
|
system. The charger-manager also can monitor charging status in |
|
runtime and in suspend-to-RAM by waking up the system periodically |
|
with help of suspend_again support. |
|
|
|
config CHARGER_MAX14577 |
|
tristate "Maxim MAX14577/77836 battery charger driver" |
|
depends on MFD_MAX14577 |
|
depends on SYSFS |
|
help |
|
Say Y to enable support for the battery charger control sysfs and |
|
platform data of MAX14577/77836 MUICs. |
|
|
|
config CHARGER_MAX8997 |
|
tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver" |
|
depends on MFD_MAX8997 && REGULATOR_MAX8997 |
|
help |
|
Say Y to enable support for the battery charger control sysfs and |
|
platform data of MAX8997/LP3974 PMICs. |
|
|
|
config CHARGER_MAX8998 |
|
tristate "Maxim MAX8998/LP3974 PMIC battery charger driver" |
|
depends on MFD_MAX8998 && REGULATOR_MAX8998 |
|
help |
|
Say Y to enable support for the battery charger control sysfs and |
|
platform data of MAX8998/LP3974 PMICs. |
|
|
|
config CHARGER_BQ2415X |
|
tristate "TI BQ2415x battery charger driver" |
|
depends on I2C |
|
help |
|
Say Y to enable support for the TI BQ2415x battery charger |
|
PMICs. |
|
|
|
You'll need this driver to charge batteries on e.g. Nokia |
|
RX-51/N900. |
|
|
|
config CHARGER_BQ24190 |
|
tristate "TI BQ24190 battery charger driver" |
|
depends on I2C && GPIOLIB |
|
help |
|
Say Y to enable support for the TI BQ24190 battery charger. |
|
|
|
config CHARGER_BQ24735 |
|
tristate "TI BQ24735 battery charger support" |
|
depends on I2C && GPIOLIB |
|
help |
|
Say Y to enable support for the TI BQ24735 battery charger. |
|
|
|
config CHARGER_SMB347 |
|
tristate "Summit Microelectronics SMB347 Battery Charger" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say Y to include support for Summit Microelectronics SMB347 |
|
Battery Charger. |
|
|
|
config CHARGER_TPS65090 |
|
tristate "TPS65090 battery charger driver" |
|
depends on MFD_TPS65090 |
|
help |
|
Say Y here to enable support for battery charging with TPS65090 |
|
PMIC chips. |
|
|
|
config AB8500_BM |
|
bool "AB8500 Battery Management Driver" |
|
depends on AB8500_CORE && AB8500_GPADC |
|
help |
|
Say Y to include support for AB8500 battery management. |
|
|
|
config BATTERY_GOLDFISH |
|
tristate "Goldfish battery driver" |
|
depends on GOLDFISH || COMPILE_TEST |
|
depends on HAS_IOMEM |
|
help |
|
Say Y to enable support for the battery and AC power in the |
|
Goldfish emulator. |
|
|
|
source "drivers/power/reset/Kconfig" |
|
|
|
if !ARCH_MT8173 |
|
source "drivers/power/mediatek/Kconfig" |
|
endif |
|
|
|
if ARCH_MT8173 |
|
source "drivers/power/mt81xx/Kconfig" |
|
endif |
|
endif # POWER_SUPPLY |
|
|
|
source "drivers/power/avs/Kconfig"
|
|
|