You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
471 lines
12 KiB
471 lines
12 KiB
/* |
|
* An I2C driver for the Philips PCF8563 RTC |
|
* Copyright 2005-06 Tower Technologies |
|
* |
|
* Author: Alessandro Zummo <a.zummo@towertech.it> |
|
* Maintainers: http://www.nslu2-linux.org/ |
|
* |
|
* based on the other drivers in this same directory. |
|
* |
|
* http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf |
|
* |
|
* This program is free software; you can redistribute it and/or modify |
|
* it under the terms of the GNU General Public License version 2 as |
|
* published by the Free Software Foundation. |
|
*/ |
|
|
|
#include <linux/i2c.h> |
|
#include <linux/bcd.h> |
|
#include <linux/rtc.h> |
|
#include <linux/slab.h> |
|
#include <linux/module.h> |
|
#include <linux/of.h> |
|
#include <linux/err.h> |
|
|
|
#define DRV_VERSION "0.4.3" |
|
|
|
#define PCF8563_REG_ST1 0x00 /* status */ |
|
#define PCF8563_REG_ST2 0x01 |
|
#define PCF8563_BIT_AIE (1 << 1) |
|
#define PCF8563_BIT_AF (1 << 3) |
|
|
|
#define PCF8563_REG_SC 0x02 /* datetime */ |
|
#define PCF8563_REG_MN 0x03 |
|
#define PCF8563_REG_HR 0x04 |
|
#define PCF8563_REG_DM 0x05 |
|
#define PCF8563_REG_DW 0x06 |
|
#define PCF8563_REG_MO 0x07 |
|
#define PCF8563_REG_YR 0x08 |
|
|
|
#define PCF8563_REG_AMN 0x09 /* alarm */ |
|
|
|
#define PCF8563_REG_CLKO 0x0D /* clock out */ |
|
#define PCF8563_REG_TMRC 0x0E /* timer control */ |
|
#define PCF8563_REG_TMR 0x0F /* timer */ |
|
|
|
#define PCF8563_SC_LV 0x80 /* low voltage */ |
|
#define PCF8563_MO_C 0x80 /* century */ |
|
|
|
static struct i2c_driver pcf8563_driver; |
|
|
|
struct pcf8563 { |
|
struct rtc_device *rtc; |
|
/* |
|
* The meaning of MO_C bit varies by the chip type. |
|
* From PCF8563 datasheet: this bit is toggled when the years |
|
* register overflows from 99 to 00 |
|
* 0 indicates the century is 20xx |
|
* 1 indicates the century is 19xx |
|
* From RTC8564 datasheet: this bit indicates change of |
|
* century. When the year digit data overflows from 99 to 00, |
|
* this bit is set. By presetting it to 0 while still in the |
|
* 20th century, it will be set in year 2000, ... |
|
* There seems no reliable way to know how the system use this |
|
* bit. So let's do it heuristically, assuming we are live in |
|
* 1970...2069. |
|
*/ |
|
int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */ |
|
int voltage_low; /* incicates if a low_voltage was detected */ |
|
|
|
struct i2c_client *client; |
|
}; |
|
|
|
static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg, |
|
unsigned char length, unsigned char *buf) |
|
{ |
|
struct i2c_msg msgs[] = { |
|
{/* setup read ptr */ |
|
.addr = client->addr, |
|
.len = 1, |
|
.buf = ®, |
|
}, |
|
{ |
|
.addr = client->addr, |
|
.flags = I2C_M_RD, |
|
.len = length, |
|
.buf = buf |
|
}, |
|
}; |
|
|
|
if ((i2c_transfer(client->adapter, msgs, 2)) != 2) { |
|
dev_err(&client->dev, "%s: read error\n", __func__); |
|
return -EIO; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int pcf8563_write_block_data(struct i2c_client *client, |
|
unsigned char reg, unsigned char length, |
|
unsigned char *buf) |
|
{ |
|
int i, err; |
|
|
|
for (i = 0; i < length; i++) { |
|
unsigned char data[2] = { reg + i, buf[i] }; |
|
|
|
err = i2c_master_send(client, data, sizeof(data)); |
|
if (err != sizeof(data)) { |
|
dev_err(&client->dev, |
|
"%s: err=%d addr=%02x, data=%02x\n", |
|
__func__, err, data[0], data[1]); |
|
return -EIO; |
|
} |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int pcf8563_set_alarm_mode(struct i2c_client *client, bool on) |
|
{ |
|
unsigned char buf[2]; |
|
int err; |
|
|
|
err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, buf + 1); |
|
if (err < 0) |
|
return err; |
|
|
|
if (on) |
|
buf[1] |= PCF8563_BIT_AIE; |
|
else |
|
buf[1] &= ~PCF8563_BIT_AIE; |
|
|
|
buf[1] &= ~PCF8563_BIT_AF; |
|
buf[0] = PCF8563_REG_ST2; |
|
|
|
err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, buf + 1); |
|
if (err < 0) { |
|
dev_err(&client->dev, "%s: write error\n", __func__); |
|
return -EIO; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int pcf8563_get_alarm_mode(struct i2c_client *client, unsigned char *en, |
|
unsigned char *pen) |
|
{ |
|
unsigned char buf; |
|
int err; |
|
|
|
err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf); |
|
if (err) |
|
return err; |
|
|
|
if (en) |
|
*en = !!(buf & PCF8563_BIT_AIE); |
|
if (pen) |
|
*pen = !!(buf & PCF8563_BIT_AF); |
|
|
|
return 0; |
|
} |
|
|
|
static irqreturn_t pcf8563_irq(int irq, void *dev_id) |
|
{ |
|
struct pcf8563 *pcf8563 = i2c_get_clientdata(dev_id); |
|
int err; |
|
char pending; |
|
|
|
err = pcf8563_get_alarm_mode(pcf8563->client, NULL, &pending); |
|
if (err) |
|
return IRQ_NONE; |
|
|
|
if (pending) { |
|
rtc_update_irq(pcf8563->rtc, 1, RTC_IRQF | RTC_AF); |
|
pcf8563_set_alarm_mode(pcf8563->client, 1); |
|
return IRQ_HANDLED; |
|
} |
|
|
|
return IRQ_NONE; |
|
} |
|
|
|
/* |
|
* In the routines that deal directly with the pcf8563 hardware, we use |
|
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. |
|
*/ |
|
static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm) |
|
{ |
|
struct pcf8563 *pcf8563 = i2c_get_clientdata(client); |
|
unsigned char buf[9]; |
|
int err; |
|
|
|
err = pcf8563_read_block_data(client, PCF8563_REG_ST1, 9, buf); |
|
if (err) |
|
return err; |
|
|
|
if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) { |
|
pcf8563->voltage_low = 1; |
|
dev_info(&client->dev, |
|
"low voltage detected, date/time is not reliable.\n"); |
|
} |
|
|
|
dev_dbg(&client->dev, |
|
"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, " |
|
"mday=%02x, wday=%02x, mon=%02x, year=%02x\n", |
|
__func__, |
|
buf[0], buf[1], buf[2], buf[3], |
|
buf[4], buf[5], buf[6], buf[7], |
|
buf[8]); |
|
|
|
|
|
tm->tm_sec = bcd2bin(buf[PCF8563_REG_SC] & 0x7F); |
|
tm->tm_min = bcd2bin(buf[PCF8563_REG_MN] & 0x7F); |
|
tm->tm_hour = bcd2bin(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */ |
|
tm->tm_mday = bcd2bin(buf[PCF8563_REG_DM] & 0x3F); |
|
tm->tm_wday = buf[PCF8563_REG_DW] & 0x07; |
|
tm->tm_mon = bcd2bin(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ |
|
tm->tm_year = bcd2bin(buf[PCF8563_REG_YR]); |
|
if (tm->tm_year < 70) |
|
tm->tm_year += 100; /* assume we are in 1970...2069 */ |
|
/* detect the polarity heuristically. see note above. */ |
|
pcf8563->c_polarity = (buf[PCF8563_REG_MO] & PCF8563_MO_C) ? |
|
(tm->tm_year >= 100) : (tm->tm_year < 100); |
|
|
|
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " |
|
"mday=%d, mon=%d, year=%d, wday=%d\n", |
|
__func__, |
|
tm->tm_sec, tm->tm_min, tm->tm_hour, |
|
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
|
|
|
/* the clock can give out invalid datetime, but we cannot return |
|
* -EINVAL otherwise hwclock will refuse to set the time on bootup. |
|
*/ |
|
if (rtc_valid_tm(tm) < 0) |
|
dev_err(&client->dev, "retrieved date/time is not valid.\n"); |
|
|
|
return 0; |
|
} |
|
|
|
static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm) |
|
{ |
|
struct pcf8563 *pcf8563 = i2c_get_clientdata(client); |
|
int err; |
|
unsigned char buf[9]; |
|
|
|
dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " |
|
"mday=%d, mon=%d, year=%d, wday=%d\n", |
|
__func__, |
|
tm->tm_sec, tm->tm_min, tm->tm_hour, |
|
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); |
|
|
|
/* hours, minutes and seconds */ |
|
buf[PCF8563_REG_SC] = bin2bcd(tm->tm_sec); |
|
buf[PCF8563_REG_MN] = bin2bcd(tm->tm_min); |
|
buf[PCF8563_REG_HR] = bin2bcd(tm->tm_hour); |
|
|
|
buf[PCF8563_REG_DM] = bin2bcd(tm->tm_mday); |
|
|
|
/* month, 1 - 12 */ |
|
buf[PCF8563_REG_MO] = bin2bcd(tm->tm_mon + 1); |
|
|
|
/* year and century */ |
|
buf[PCF8563_REG_YR] = bin2bcd(tm->tm_year % 100); |
|
if (pcf8563->c_polarity ? (tm->tm_year >= 100) : (tm->tm_year < 100)) |
|
buf[PCF8563_REG_MO] |= PCF8563_MO_C; |
|
|
|
buf[PCF8563_REG_DW] = tm->tm_wday & 0x07; |
|
|
|
err = pcf8563_write_block_data(client, PCF8563_REG_SC, |
|
9 - PCF8563_REG_SC, buf + PCF8563_REG_SC); |
|
if (err) |
|
return err; |
|
|
|
return 0; |
|
} |
|
|
|
#ifdef CONFIG_RTC_INTF_DEV |
|
static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) |
|
{ |
|
struct pcf8563 *pcf8563 = i2c_get_clientdata(to_i2c_client(dev)); |
|
struct rtc_time tm; |
|
|
|
switch (cmd) { |
|
case RTC_VL_READ: |
|
if (pcf8563->voltage_low) |
|
dev_info(dev, "low voltage detected, date/time is not reliable.\n"); |
|
|
|
if (copy_to_user((void __user *)arg, &pcf8563->voltage_low, |
|
sizeof(int))) |
|
return -EFAULT; |
|
return 0; |
|
case RTC_VL_CLR: |
|
/* |
|
* Clear the VL bit in the seconds register in case |
|
* the time has not been set already (which would |
|
* have cleared it). This does not really matter |
|
* because of the cached voltage_low value but do it |
|
* anyway for consistency. |
|
*/ |
|
if (pcf8563_get_datetime(to_i2c_client(dev), &tm)) |
|
pcf8563_set_datetime(to_i2c_client(dev), &tm); |
|
|
|
/* Clear the cached value. */ |
|
pcf8563->voltage_low = 0; |
|
|
|
return 0; |
|
default: |
|
return -ENOIOCTLCMD; |
|
} |
|
} |
|
#else |
|
#define pcf8563_rtc_ioctl NULL |
|
#endif |
|
|
|
static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm) |
|
{ |
|
return pcf8563_get_datetime(to_i2c_client(dev), tm); |
|
} |
|
|
|
static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm) |
|
{ |
|
return pcf8563_set_datetime(to_i2c_client(dev), tm); |
|
} |
|
|
|
static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm) |
|
{ |
|
struct i2c_client *client = to_i2c_client(dev); |
|
unsigned char buf[4]; |
|
int err; |
|
|
|
err = pcf8563_read_block_data(client, PCF8563_REG_AMN, 4, buf); |
|
if (err) |
|
return err; |
|
|
|
dev_dbg(&client->dev, |
|
"%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n", |
|
__func__, buf[0], buf[1], buf[2], buf[3]); |
|
|
|
tm->time.tm_min = bcd2bin(buf[0] & 0x7F); |
|
tm->time.tm_hour = bcd2bin(buf[1] & 0x7F); |
|
tm->time.tm_mday = bcd2bin(buf[2] & 0x1F); |
|
tm->time.tm_wday = bcd2bin(buf[3] & 0x7); |
|
tm->time.tm_mon = -1; |
|
tm->time.tm_year = -1; |
|
tm->time.tm_yday = -1; |
|
tm->time.tm_isdst = -1; |
|
|
|
err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending); |
|
if (err < 0) |
|
return err; |
|
|
|
dev_dbg(&client->dev, "%s: tm is mins=%d, hours=%d, mday=%d, wday=%d," |
|
" enabled=%d, pending=%d\n", __func__, tm->time.tm_min, |
|
tm->time.tm_hour, tm->time.tm_mday, tm->time.tm_wday, |
|
tm->enabled, tm->pending); |
|
|
|
return 0; |
|
} |
|
|
|
static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm) |
|
{ |
|
struct i2c_client *client = to_i2c_client(dev); |
|
unsigned char buf[4]; |
|
int err; |
|
|
|
dev_dbg(dev, "%s, min=%d hour=%d wday=%d mday=%d " |
|
"enabled=%d pending=%d\n", __func__, |
|
tm->time.tm_min, tm->time.tm_hour, tm->time.tm_wday, |
|
tm->time.tm_mday, tm->enabled, tm->pending); |
|
|
|
buf[0] = bin2bcd(tm->time.tm_min); |
|
buf[1] = bin2bcd(tm->time.tm_hour); |
|
buf[2] = bin2bcd(tm->time.tm_mday); |
|
buf[3] = tm->time.tm_wday & 0x07; |
|
|
|
err = pcf8563_write_block_data(client, PCF8563_REG_AMN, 4, buf); |
|
if (err) |
|
return err; |
|
|
|
return pcf8563_set_alarm_mode(client, 1); |
|
} |
|
|
|
static int pcf8563_irq_enable(struct device *dev, unsigned int enabled) |
|
{ |
|
return pcf8563_set_alarm_mode(to_i2c_client(dev), !!enabled); |
|
} |
|
|
|
static const struct rtc_class_ops pcf8563_rtc_ops = { |
|
.ioctl = pcf8563_rtc_ioctl, |
|
.read_time = pcf8563_rtc_read_time, |
|
.set_time = pcf8563_rtc_set_time, |
|
.read_alarm = pcf8563_rtc_read_alarm, |
|
.set_alarm = pcf8563_rtc_set_alarm, |
|
.alarm_irq_enable = pcf8563_irq_enable, |
|
}; |
|
|
|
static int pcf8563_probe(struct i2c_client *client, |
|
const struct i2c_device_id *id) |
|
{ |
|
struct pcf8563 *pcf8563; |
|
int err; |
|
|
|
dev_dbg(&client->dev, "%s\n", __func__); |
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) |
|
return -ENODEV; |
|
|
|
pcf8563 = devm_kzalloc(&client->dev, sizeof(struct pcf8563), |
|
GFP_KERNEL); |
|
if (!pcf8563) |
|
return -ENOMEM; |
|
|
|
dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); |
|
|
|
i2c_set_clientdata(client, pcf8563); |
|
pcf8563->client = client; |
|
device_set_wakeup_capable(&client->dev, 1); |
|
|
|
pcf8563->rtc = devm_rtc_device_register(&client->dev, |
|
pcf8563_driver.driver.name, |
|
&pcf8563_rtc_ops, THIS_MODULE); |
|
|
|
if (IS_ERR(pcf8563->rtc)) |
|
return PTR_ERR(pcf8563->rtc); |
|
|
|
if (client->irq > 0) { |
|
err = devm_request_threaded_irq(&client->dev, client->irq, |
|
NULL, pcf8563_irq, |
|
IRQF_SHARED|IRQF_ONESHOT|IRQF_TRIGGER_FALLING, |
|
pcf8563->rtc->name, client); |
|
if (err) { |
|
dev_err(&client->dev, "unable to request IRQ %d\n", |
|
client->irq); |
|
return err; |
|
} |
|
|
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static const struct i2c_device_id pcf8563_id[] = { |
|
{ "pcf8563", 0 }, |
|
{ "rtc8564", 0 }, |
|
{ } |
|
}; |
|
MODULE_DEVICE_TABLE(i2c, pcf8563_id); |
|
|
|
#ifdef CONFIG_OF |
|
static const struct of_device_id pcf8563_of_match[] = { |
|
{ .compatible = "nxp,pcf8563" }, |
|
{} |
|
}; |
|
MODULE_DEVICE_TABLE(of, pcf8563_of_match); |
|
#endif |
|
|
|
static struct i2c_driver pcf8563_driver = { |
|
.driver = { |
|
.name = "rtc-pcf8563", |
|
.owner = THIS_MODULE, |
|
.of_match_table = of_match_ptr(pcf8563_of_match), |
|
}, |
|
.probe = pcf8563_probe, |
|
.id_table = pcf8563_id, |
|
}; |
|
|
|
module_i2c_driver(pcf8563_driver); |
|
|
|
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); |
|
MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver"); |
|
MODULE_LICENSE("GPL"); |
|
MODULE_VERSION(DRV_VERSION);
|
|
|