You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1383 lines
32 KiB
1383 lines
32 KiB
/* |
|
* i2c_adap_pxa.c |
|
* |
|
* I2C adapter for the PXA I2C bus access. |
|
* |
|
* Copyright (C) 2002 Intrinsyc Software Inc. |
|
* Copyright (C) 2004-2005 Deep Blue Solutions Ltd. |
|
* |
|
* This program is free software; you can redistribute it and/or modify |
|
* it under the terms of the GNU General Public License version 2 as |
|
* published by the Free Software Foundation. |
|
* |
|
* History: |
|
* Apr 2002: Initial version [CS] |
|
* Jun 2002: Properly separated algo/adap [FB] |
|
* Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem] |
|
* Jan 2003: added limited signal handling [Kai-Uwe Bloem] |
|
* Sep 2004: Major rework to ensure efficient bus handling [RMK] |
|
* Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood] |
|
* Feb 2005: Rework slave mode handling [RMK] |
|
*/ |
|
#include <linux/kernel.h> |
|
#include <linux/module.h> |
|
#include <linux/i2c.h> |
|
#include <linux/init.h> |
|
#include <linux/time.h> |
|
#include <linux/sched.h> |
|
#include <linux/delay.h> |
|
#include <linux/errno.h> |
|
#include <linux/interrupt.h> |
|
#include <linux/i2c-pxa.h> |
|
#include <linux/of.h> |
|
#include <linux/of_device.h> |
|
#include <linux/platform_device.h> |
|
#include <linux/err.h> |
|
#include <linux/clk.h> |
|
#include <linux/slab.h> |
|
#include <linux/io.h> |
|
#include <linux/i2c/pxa-i2c.h> |
|
|
|
#include <asm/irq.h> |
|
|
|
struct pxa_reg_layout { |
|
u32 ibmr; |
|
u32 idbr; |
|
u32 icr; |
|
u32 isr; |
|
u32 isar; |
|
u32 ilcr; |
|
u32 iwcr; |
|
}; |
|
|
|
enum pxa_i2c_types { |
|
REGS_PXA2XX, |
|
REGS_PXA3XX, |
|
REGS_CE4100, |
|
REGS_PXA910, |
|
}; |
|
|
|
/* |
|
* I2C registers definitions |
|
*/ |
|
static struct pxa_reg_layout pxa_reg_layout[] = { |
|
[REGS_PXA2XX] = { |
|
.ibmr = 0x00, |
|
.idbr = 0x08, |
|
.icr = 0x10, |
|
.isr = 0x18, |
|
.isar = 0x20, |
|
}, |
|
[REGS_PXA3XX] = { |
|
.ibmr = 0x00, |
|
.idbr = 0x04, |
|
.icr = 0x08, |
|
.isr = 0x0c, |
|
.isar = 0x10, |
|
}, |
|
[REGS_CE4100] = { |
|
.ibmr = 0x14, |
|
.idbr = 0x0c, |
|
.icr = 0x00, |
|
.isr = 0x04, |
|
/* no isar register */ |
|
}, |
|
[REGS_PXA910] = { |
|
.ibmr = 0x00, |
|
.idbr = 0x08, |
|
.icr = 0x10, |
|
.isr = 0x18, |
|
.isar = 0x20, |
|
.ilcr = 0x28, |
|
.iwcr = 0x30, |
|
}, |
|
}; |
|
|
|
static const struct platform_device_id i2c_pxa_id_table[] = { |
|
{ "pxa2xx-i2c", REGS_PXA2XX }, |
|
{ "pxa3xx-pwri2c", REGS_PXA3XX }, |
|
{ "ce4100-i2c", REGS_CE4100 }, |
|
{ "pxa910-i2c", REGS_PXA910 }, |
|
{ }, |
|
}; |
|
MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); |
|
|
|
/* |
|
* I2C bit definitions |
|
*/ |
|
|
|
#define ICR_START (1 << 0) /* start bit */ |
|
#define ICR_STOP (1 << 1) /* stop bit */ |
|
#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ |
|
#define ICR_TB (1 << 3) /* transfer byte bit */ |
|
#define ICR_MA (1 << 4) /* master abort */ |
|
#define ICR_SCLE (1 << 5) /* master clock enable */ |
|
#define ICR_IUE (1 << 6) /* unit enable */ |
|
#define ICR_GCD (1 << 7) /* general call disable */ |
|
#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ |
|
#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ |
|
#define ICR_BEIE (1 << 10) /* enable bus error ints */ |
|
#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ |
|
#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ |
|
#define ICR_SADIE (1 << 13) /* slave address detected int enable */ |
|
#define ICR_UR (1 << 14) /* unit reset */ |
|
#define ICR_FM (1 << 15) /* fast mode */ |
|
#define ICR_HS (1 << 16) /* High Speed mode */ |
|
#define ICR_GPIOEN (1 << 19) /* enable GPIO mode for SCL in HS */ |
|
|
|
#define ISR_RWM (1 << 0) /* read/write mode */ |
|
#define ISR_ACKNAK (1 << 1) /* ack/nak status */ |
|
#define ISR_UB (1 << 2) /* unit busy */ |
|
#define ISR_IBB (1 << 3) /* bus busy */ |
|
#define ISR_SSD (1 << 4) /* slave stop detected */ |
|
#define ISR_ALD (1 << 5) /* arbitration loss detected */ |
|
#define ISR_ITE (1 << 6) /* tx buffer empty */ |
|
#define ISR_IRF (1 << 7) /* rx buffer full */ |
|
#define ISR_GCAD (1 << 8) /* general call address detected */ |
|
#define ISR_SAD (1 << 9) /* slave address detected */ |
|
#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ |
|
|
|
/* bit field shift & mask */ |
|
#define ILCR_SLV_SHIFT 0 |
|
#define ILCR_SLV_MASK (0x1FF << ILCR_SLV_SHIFT) |
|
#define ILCR_FLV_SHIFT 9 |
|
#define ILCR_FLV_MASK (0x1FF << ILCR_FLV_SHIFT) |
|
#define ILCR_HLVL_SHIFT 18 |
|
#define ILCR_HLVL_MASK (0x1FF << ILCR_HLVL_SHIFT) |
|
#define ILCR_HLVH_SHIFT 27 |
|
#define ILCR_HLVH_MASK (0x1F << ILCR_HLVH_SHIFT) |
|
|
|
#define IWCR_CNT_SHIFT 0 |
|
#define IWCR_CNT_MASK (0x1F << IWCR_CNT_SHIFT) |
|
#define IWCR_HS_CNT1_SHIFT 5 |
|
#define IWCR_HS_CNT1_MASK (0x1F << IWCR_HS_CNT1_SHIFT) |
|
#define IWCR_HS_CNT2_SHIFT 10 |
|
#define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT) |
|
|
|
struct pxa_i2c { |
|
spinlock_t lock; |
|
wait_queue_head_t wait; |
|
struct i2c_msg *msg; |
|
unsigned int msg_num; |
|
unsigned int msg_idx; |
|
unsigned int msg_ptr; |
|
unsigned int slave_addr; |
|
unsigned int req_slave_addr; |
|
|
|
struct i2c_adapter adap; |
|
struct clk *clk; |
|
#ifdef CONFIG_I2C_PXA_SLAVE |
|
struct i2c_slave_client *slave; |
|
#endif |
|
|
|
unsigned int irqlogidx; |
|
u32 isrlog[32]; |
|
u32 icrlog[32]; |
|
|
|
void __iomem *reg_base; |
|
void __iomem *reg_ibmr; |
|
void __iomem *reg_idbr; |
|
void __iomem *reg_icr; |
|
void __iomem *reg_isr; |
|
void __iomem *reg_isar; |
|
void __iomem *reg_ilcr; |
|
void __iomem *reg_iwcr; |
|
|
|
unsigned long iobase; |
|
unsigned long iosize; |
|
|
|
int irq; |
|
unsigned int use_pio :1; |
|
unsigned int fast_mode :1; |
|
unsigned int high_mode:1; |
|
unsigned char master_code; |
|
unsigned long rate; |
|
bool highmode_enter; |
|
}; |
|
|
|
#define _IBMR(i2c) ((i2c)->reg_ibmr) |
|
#define _IDBR(i2c) ((i2c)->reg_idbr) |
|
#define _ICR(i2c) ((i2c)->reg_icr) |
|
#define _ISR(i2c) ((i2c)->reg_isr) |
|
#define _ISAR(i2c) ((i2c)->reg_isar) |
|
#define _ILCR(i2c) ((i2c)->reg_ilcr) |
|
#define _IWCR(i2c) ((i2c)->reg_iwcr) |
|
|
|
/* |
|
* I2C Slave mode address |
|
*/ |
|
#define I2C_PXA_SLAVE_ADDR 0x1 |
|
|
|
#ifdef DEBUG |
|
|
|
struct bits { |
|
u32 mask; |
|
const char *set; |
|
const char *unset; |
|
}; |
|
#define PXA_BIT(m, s, u) { .mask = m, .set = s, .unset = u } |
|
|
|
static inline void |
|
decode_bits(const char *prefix, const struct bits *bits, int num, u32 val) |
|
{ |
|
printk("%s %08x: ", prefix, val); |
|
while (num--) { |
|
const char *str = val & bits->mask ? bits->set : bits->unset; |
|
if (str) |
|
printk("%s ", str); |
|
bits++; |
|
} |
|
} |
|
|
|
static const struct bits isr_bits[] = { |
|
PXA_BIT(ISR_RWM, "RX", "TX"), |
|
PXA_BIT(ISR_ACKNAK, "NAK", "ACK"), |
|
PXA_BIT(ISR_UB, "Bsy", "Rdy"), |
|
PXA_BIT(ISR_IBB, "BusBsy", "BusRdy"), |
|
PXA_BIT(ISR_SSD, "SlaveStop", NULL), |
|
PXA_BIT(ISR_ALD, "ALD", NULL), |
|
PXA_BIT(ISR_ITE, "TxEmpty", NULL), |
|
PXA_BIT(ISR_IRF, "RxFull", NULL), |
|
PXA_BIT(ISR_GCAD, "GenCall", NULL), |
|
PXA_BIT(ISR_SAD, "SlaveAddr", NULL), |
|
PXA_BIT(ISR_BED, "BusErr", NULL), |
|
}; |
|
|
|
static void decode_ISR(unsigned int val) |
|
{ |
|
decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val); |
|
printk("\n"); |
|
} |
|
|
|
static const struct bits icr_bits[] = { |
|
PXA_BIT(ICR_START, "START", NULL), |
|
PXA_BIT(ICR_STOP, "STOP", NULL), |
|
PXA_BIT(ICR_ACKNAK, "ACKNAK", NULL), |
|
PXA_BIT(ICR_TB, "TB", NULL), |
|
PXA_BIT(ICR_MA, "MA", NULL), |
|
PXA_BIT(ICR_SCLE, "SCLE", "scle"), |
|
PXA_BIT(ICR_IUE, "IUE", "iue"), |
|
PXA_BIT(ICR_GCD, "GCD", NULL), |
|
PXA_BIT(ICR_ITEIE, "ITEIE", NULL), |
|
PXA_BIT(ICR_IRFIE, "IRFIE", NULL), |
|
PXA_BIT(ICR_BEIE, "BEIE", NULL), |
|
PXA_BIT(ICR_SSDIE, "SSDIE", NULL), |
|
PXA_BIT(ICR_ALDIE, "ALDIE", NULL), |
|
PXA_BIT(ICR_SADIE, "SADIE", NULL), |
|
PXA_BIT(ICR_UR, "UR", "ur"), |
|
}; |
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE |
|
static void decode_ICR(unsigned int val) |
|
{ |
|
decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val); |
|
printk("\n"); |
|
} |
|
#endif |
|
|
|
static unsigned int i2c_debug = DEBUG; |
|
|
|
static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) |
|
{ |
|
dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, |
|
readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); |
|
} |
|
|
|
#define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__) |
|
|
|
static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) |
|
{ |
|
unsigned int i; |
|
struct device *dev = &i2c->adap.dev; |
|
|
|
dev_err(dev, "slave_0x%x error: %s\n", |
|
i2c->req_slave_addr >> 1, why); |
|
dev_err(dev, "msg_num: %d msg_idx: %d msg_ptr: %d\n", |
|
i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); |
|
dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n", |
|
readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)), |
|
readl(_ISR(i2c))); |
|
dev_dbg(dev, "log: "); |
|
for (i = 0; i < i2c->irqlogidx; i++) |
|
pr_debug("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); |
|
|
|
pr_debug("\n"); |
|
} |
|
|
|
#else /* ifdef DEBUG */ |
|
|
|
#define i2c_debug 0 |
|
|
|
#define show_state(i2c) do { } while (0) |
|
#define decode_ISR(val) do { } while (0) |
|
#define decode_ICR(val) do { } while (0) |
|
#define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0) |
|
|
|
#endif /* ifdef DEBUG / else */ |
|
|
|
static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret); |
|
static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id); |
|
|
|
static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) |
|
{ |
|
return !(readl(_ICR(i2c)) & ICR_SCLE); |
|
} |
|
|
|
static void i2c_pxa_abort(struct pxa_i2c *i2c) |
|
{ |
|
int i = 250; |
|
|
|
if (i2c_pxa_is_slavemode(i2c)) { |
|
dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__); |
|
return; |
|
} |
|
|
|
while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) { |
|
unsigned long icr = readl(_ICR(i2c)); |
|
|
|
icr &= ~ICR_START; |
|
icr |= ICR_ACKNAK | ICR_STOP | ICR_TB; |
|
|
|
writel(icr, _ICR(i2c)); |
|
|
|
show_state(i2c); |
|
|
|
mdelay(1); |
|
i --; |
|
} |
|
|
|
writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP), |
|
_ICR(i2c)); |
|
} |
|
|
|
static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) |
|
{ |
|
int timeout = DEF_TIMEOUT; |
|
|
|
while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { |
|
if ((readl(_ISR(i2c)) & ISR_SAD) != 0) |
|
timeout += 4; |
|
|
|
msleep(2); |
|
show_state(i2c); |
|
} |
|
|
|
if (timeout < 0) |
|
show_state(i2c); |
|
|
|
return timeout < 0 ? I2C_RETRY : 0; |
|
} |
|
|
|
static int i2c_pxa_wait_master(struct pxa_i2c *i2c) |
|
{ |
|
unsigned long timeout = jiffies + HZ*4; |
|
|
|
while (time_before(jiffies, timeout)) { |
|
if (i2c_debug > 1) |
|
dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", |
|
__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); |
|
|
|
if (readl(_ISR(i2c)) & ISR_SAD) { |
|
if (i2c_debug > 0) |
|
dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__); |
|
goto out; |
|
} |
|
|
|
/* wait for unit and bus being not busy, and we also do a |
|
* quick check of the i2c lines themselves to ensure they've |
|
* gone high... |
|
*/ |
|
if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) { |
|
if (i2c_debug > 0) |
|
dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); |
|
return 1; |
|
} |
|
|
|
msleep(1); |
|
} |
|
|
|
if (i2c_debug > 0) |
|
dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); |
|
out: |
|
return 0; |
|
} |
|
|
|
static int i2c_pxa_set_master(struct pxa_i2c *i2c) |
|
{ |
|
if (i2c_debug) |
|
dev_dbg(&i2c->adap.dev, "setting to bus master\n"); |
|
|
|
if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) { |
|
dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__); |
|
if (!i2c_pxa_wait_master(i2c)) { |
|
dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__); |
|
return I2C_RETRY; |
|
} |
|
} |
|
|
|
writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); |
|
return 0; |
|
} |
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE |
|
static int i2c_pxa_wait_slave(struct pxa_i2c *i2c) |
|
{ |
|
unsigned long timeout = jiffies + HZ*1; |
|
|
|
/* wait for stop */ |
|
|
|
show_state(i2c); |
|
|
|
while (time_before(jiffies, timeout)) { |
|
if (i2c_debug > 1) |
|
dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", |
|
__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); |
|
|
|
if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 || |
|
(readl(_ISR(i2c)) & ISR_SAD) != 0 || |
|
(readl(_ICR(i2c)) & ICR_SCLE) == 0) { |
|
if (i2c_debug > 1) |
|
dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); |
|
return 1; |
|
} |
|
|
|
msleep(1); |
|
} |
|
|
|
if (i2c_debug > 0) |
|
dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); |
|
return 0; |
|
} |
|
|
|
/* |
|
* clear the hold on the bus, and take of anything else |
|
* that has been configured |
|
*/ |
|
static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) |
|
{ |
|
show_state(i2c); |
|
|
|
if (errcode < 0) { |
|
udelay(100); /* simple delay */ |
|
} else { |
|
/* we need to wait for the stop condition to end */ |
|
|
|
/* if we where in stop, then clear... */ |
|
if (readl(_ICR(i2c)) & ICR_STOP) { |
|
udelay(100); |
|
writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c)); |
|
} |
|
|
|
if (!i2c_pxa_wait_slave(i2c)) { |
|
dev_err(&i2c->adap.dev, "%s: wait timedout\n", |
|
__func__); |
|
return; |
|
} |
|
} |
|
|
|
writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c)); |
|
writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); |
|
|
|
if (i2c_debug) { |
|
dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c))); |
|
decode_ICR(readl(_ICR(i2c))); |
|
} |
|
} |
|
#else |
|
#define i2c_pxa_set_slave(i2c, err) do { } while (0) |
|
#endif |
|
|
|
static void i2c_pxa_reset(struct pxa_i2c *i2c) |
|
{ |
|
pr_debug("Resetting I2C Controller Unit\n"); |
|
|
|
/* abort any transfer currently under way */ |
|
i2c_pxa_abort(i2c); |
|
|
|
/* reset according to 9.8 */ |
|
writel(ICR_UR, _ICR(i2c)); |
|
writel(I2C_ISR_INIT, _ISR(i2c)); |
|
writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); |
|
|
|
if (i2c->reg_isar && IS_ENABLED(CONFIG_I2C_PXA_SLAVE)) |
|
writel(i2c->slave_addr, _ISAR(i2c)); |
|
|
|
/* set control register values */ |
|
writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c)); |
|
writel(readl(_ICR(i2c)) | (i2c->high_mode ? ICR_HS : 0), _ICR(i2c)); |
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE |
|
dev_info(&i2c->adap.dev, "Enabling slave mode\n"); |
|
writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c)); |
|
#endif |
|
|
|
i2c_pxa_set_slave(i2c, 0); |
|
|
|
/* enable unit */ |
|
writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c)); |
|
udelay(100); |
|
} |
|
|
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE |
|
/* |
|
* PXA I2C Slave mode |
|
*/ |
|
|
|
static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) |
|
{ |
|
if (isr & ISR_BED) { |
|
/* what should we do here? */ |
|
} else { |
|
int ret = 0; |
|
|
|
if (i2c->slave != NULL) |
|
ret = i2c->slave->read(i2c->slave->data); |
|
|
|
writel(ret, _IDBR(i2c)); |
|
writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */ |
|
} |
|
} |
|
|
|
static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) |
|
{ |
|
unsigned int byte = readl(_IDBR(i2c)); |
|
|
|
if (i2c->slave != NULL) |
|
i2c->slave->write(i2c->slave->data, byte); |
|
|
|
writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); |
|
} |
|
|
|
static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) |
|
{ |
|
int timeout; |
|
|
|
if (i2c_debug > 0) |
|
dev_dbg(&i2c->adap.dev, "SAD, mode is slave-%cx\n", |
|
(isr & ISR_RWM) ? 'r' : 't'); |
|
|
|
if (i2c->slave != NULL) |
|
i2c->slave->event(i2c->slave->data, |
|
(isr & ISR_RWM) ? I2C_SLAVE_EVENT_START_READ : I2C_SLAVE_EVENT_START_WRITE); |
|
|
|
/* |
|
* slave could interrupt in the middle of us generating a |
|
* start condition... if this happens, we'd better back off |
|
* and stop holding the poor thing up |
|
*/ |
|
writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); |
|
writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); |
|
|
|
timeout = 0x10000; |
|
|
|
while (1) { |
|
if ((readl(_IBMR(i2c)) & 2) == 2) |
|
break; |
|
|
|
timeout--; |
|
|
|
if (timeout <= 0) { |
|
dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); |
|
break; |
|
} |
|
} |
|
|
|
writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); |
|
} |
|
|
|
static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) |
|
{ |
|
if (i2c_debug > 2) |
|
dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop)\n"); |
|
|
|
if (i2c->slave != NULL) |
|
i2c->slave->event(i2c->slave->data, I2C_SLAVE_EVENT_STOP); |
|
|
|
if (i2c_debug > 2) |
|
dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop) acked\n"); |
|
|
|
/* |
|
* If we have a master-mode message waiting, |
|
* kick it off now that the slave has completed. |
|
*/ |
|
if (i2c->msg) |
|
i2c_pxa_master_complete(i2c, I2C_RETRY); |
|
} |
|
#else |
|
static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) |
|
{ |
|
if (isr & ISR_BED) { |
|
/* what should we do here? */ |
|
} else { |
|
writel(0, _IDBR(i2c)); |
|
writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); |
|
} |
|
} |
|
|
|
static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) |
|
{ |
|
writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); |
|
} |
|
|
|
static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) |
|
{ |
|
int timeout; |
|
|
|
/* |
|
* slave could interrupt in the middle of us generating a |
|
* start condition... if this happens, we'd better back off |
|
* and stop holding the poor thing up |
|
*/ |
|
writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); |
|
writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); |
|
|
|
timeout = 0x10000; |
|
|
|
while (1) { |
|
if ((readl(_IBMR(i2c)) & 2) == 2) |
|
break; |
|
|
|
timeout--; |
|
|
|
if (timeout <= 0) { |
|
dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); |
|
break; |
|
} |
|
} |
|
|
|
writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); |
|
} |
|
|
|
static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) |
|
{ |
|
if (i2c->msg) |
|
i2c_pxa_master_complete(i2c, I2C_RETRY); |
|
} |
|
#endif |
|
|
|
/* |
|
* PXA I2C Master mode |
|
*/ |
|
|
|
static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg *msg) |
|
{ |
|
unsigned int addr = (msg->addr & 0x7f) << 1; |
|
|
|
if (msg->flags & I2C_M_RD) |
|
addr |= 1; |
|
|
|
return addr; |
|
} |
|
|
|
static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) |
|
{ |
|
u32 icr; |
|
|
|
/* |
|
* Step 1: target slave address into IDBR |
|
*/ |
|
writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); |
|
i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); |
|
|
|
/* |
|
* Step 2: initiate the write. |
|
*/ |
|
icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); |
|
writel(icr | ICR_START | ICR_TB, _ICR(i2c)); |
|
} |
|
|
|
static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) |
|
{ |
|
u32 icr; |
|
|
|
/* |
|
* Clear the STOP and ACK flags |
|
*/ |
|
icr = readl(_ICR(i2c)); |
|
icr &= ~(ICR_STOP | ICR_ACKNAK); |
|
writel(icr, _ICR(i2c)); |
|
} |
|
|
|
static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) |
|
{ |
|
/* make timeout the same as for interrupt based functions */ |
|
long timeout = 2 * DEF_TIMEOUT; |
|
|
|
/* |
|
* Wait for the bus to become free. |
|
*/ |
|
while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { |
|
udelay(1000); |
|
show_state(i2c); |
|
} |
|
|
|
if (timeout < 0) { |
|
show_state(i2c); |
|
dev_err(&i2c->adap.dev, |
|
"i2c_pxa: timeout waiting for bus free\n"); |
|
return I2C_RETRY; |
|
} |
|
|
|
/* |
|
* Set master mode. |
|
*/ |
|
writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); |
|
|
|
return 0; |
|
} |
|
|
|
/* |
|
* PXA I2C send master code |
|
* 1. Load master code to IDBR and send it. |
|
* Note for HS mode, set ICR [GPIOEN]. |
|
* 2. Wait until win arbitration. |
|
*/ |
|
static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c) |
|
{ |
|
u32 icr; |
|
long timeout; |
|
|
|
spin_lock_irq(&i2c->lock); |
|
i2c->highmode_enter = true; |
|
writel(i2c->master_code, _IDBR(i2c)); |
|
|
|
icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); |
|
icr |= ICR_GPIOEN | ICR_START | ICR_TB | ICR_ITEIE; |
|
writel(icr, _ICR(i2c)); |
|
|
|
spin_unlock_irq(&i2c->lock); |
|
timeout = wait_event_timeout(i2c->wait, |
|
i2c->highmode_enter == false, HZ * 1); |
|
|
|
i2c->highmode_enter = false; |
|
|
|
return (timeout == 0) ? I2C_RETRY : 0; |
|
} |
|
|
|
static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, |
|
struct i2c_msg *msg, int num) |
|
{ |
|
unsigned long timeout = 500000; /* 5 seconds */ |
|
int ret = 0; |
|
|
|
ret = i2c_pxa_pio_set_master(i2c); |
|
if (ret) |
|
goto out; |
|
|
|
i2c->msg = msg; |
|
i2c->msg_num = num; |
|
i2c->msg_idx = 0; |
|
i2c->msg_ptr = 0; |
|
i2c->irqlogidx = 0; |
|
|
|
i2c_pxa_start_message(i2c); |
|
|
|
while (i2c->msg_num > 0 && --timeout) { |
|
i2c_pxa_handler(0, i2c); |
|
udelay(10); |
|
} |
|
|
|
i2c_pxa_stop_message(i2c); |
|
|
|
/* |
|
* We place the return code in i2c->msg_idx. |
|
*/ |
|
ret = i2c->msg_idx; |
|
|
|
out: |
|
if (timeout == 0) { |
|
i2c_pxa_scream_blue_murder(i2c, "timeout"); |
|
ret = I2C_RETRY; |
|
} |
|
|
|
return ret; |
|
} |
|
|
|
/* |
|
* We are protected by the adapter bus mutex. |
|
*/ |
|
static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) |
|
{ |
|
long timeout; |
|
int ret; |
|
|
|
/* |
|
* Wait for the bus to become free. |
|
*/ |
|
ret = i2c_pxa_wait_bus_not_busy(i2c); |
|
if (ret) { |
|
dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); |
|
goto out; |
|
} |
|
|
|
/* |
|
* Set master mode. |
|
*/ |
|
ret = i2c_pxa_set_master(i2c); |
|
if (ret) { |
|
dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret); |
|
goto out; |
|
} |
|
|
|
if (i2c->high_mode) { |
|
ret = i2c_pxa_send_mastercode(i2c); |
|
if (ret) { |
|
dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n"); |
|
goto out; |
|
} |
|
} |
|
|
|
spin_lock_irq(&i2c->lock); |
|
|
|
i2c->msg = msg; |
|
i2c->msg_num = num; |
|
i2c->msg_idx = 0; |
|
i2c->msg_ptr = 0; |
|
i2c->irqlogidx = 0; |
|
|
|
i2c_pxa_start_message(i2c); |
|
|
|
spin_unlock_irq(&i2c->lock); |
|
|
|
/* |
|
* The rest of the processing occurs in the interrupt handler. |
|
*/ |
|
timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); |
|
i2c_pxa_stop_message(i2c); |
|
|
|
/* |
|
* We place the return code in i2c->msg_idx. |
|
*/ |
|
ret = i2c->msg_idx; |
|
|
|
if (!timeout && i2c->msg_num) { |
|
i2c_pxa_scream_blue_murder(i2c, "timeout"); |
|
ret = I2C_RETRY; |
|
} |
|
|
|
out: |
|
return ret; |
|
} |
|
|
|
static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, |
|
struct i2c_msg msgs[], int num) |
|
{ |
|
struct pxa_i2c *i2c = adap->algo_data; |
|
int ret, i; |
|
|
|
/* If the I2C controller is disabled we need to reset it |
|
(probably due to a suspend/resume destroying state). We do |
|
this here as we can then avoid worrying about resuming the |
|
controller before its users. */ |
|
if (!(readl(_ICR(i2c)) & ICR_IUE)) |
|
i2c_pxa_reset(i2c); |
|
|
|
for (i = adap->retries; i >= 0; i--) { |
|
ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); |
|
if (ret != I2C_RETRY) |
|
goto out; |
|
|
|
if (i2c_debug) |
|
dev_dbg(&adap->dev, "Retrying transmission\n"); |
|
udelay(100); |
|
} |
|
i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); |
|
ret = -EREMOTEIO; |
|
out: |
|
i2c_pxa_set_slave(i2c, ret); |
|
return ret; |
|
} |
|
|
|
/* |
|
* i2c_pxa_master_complete - complete the message and wake up. |
|
*/ |
|
static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret) |
|
{ |
|
i2c->msg_ptr = 0; |
|
i2c->msg = NULL; |
|
i2c->msg_idx ++; |
|
i2c->msg_num = 0; |
|
if (ret) |
|
i2c->msg_idx = ret; |
|
if (!i2c->use_pio) |
|
wake_up(&i2c->wait); |
|
} |
|
|
|
static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) |
|
{ |
|
u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); |
|
|
|
again: |
|
/* |
|
* If ISR_ALD is set, we lost arbitration. |
|
*/ |
|
if (isr & ISR_ALD) { |
|
/* |
|
* Do we need to do anything here? The PXA docs |
|
* are vague about what happens. |
|
*/ |
|
i2c_pxa_scream_blue_murder(i2c, "ALD set"); |
|
|
|
/* |
|
* We ignore this error. We seem to see spurious ALDs |
|
* for seemingly no reason. If we handle them as I think |
|
* they should, we end up causing an I2C error, which |
|
* is painful for some systems. |
|
*/ |
|
return; /* ignore */ |
|
} |
|
|
|
if ((isr & ISR_BED) && |
|
(!((i2c->msg->flags & I2C_M_IGNORE_NAK) && |
|
(isr & ISR_ACKNAK)))) { |
|
int ret = BUS_ERROR; |
|
|
|
/* |
|
* I2C bus error - either the device NAK'd us, or |
|
* something more serious happened. If we were NAK'd |
|
* on the initial address phase, we can retry. |
|
*/ |
|
if (isr & ISR_ACKNAK) { |
|
if (i2c->msg_ptr == 0 && i2c->msg_idx == 0) |
|
ret = I2C_RETRY; |
|
else |
|
ret = XFER_NAKED; |
|
} |
|
i2c_pxa_master_complete(i2c, ret); |
|
} else if (isr & ISR_RWM) { |
|
/* |
|
* Read mode. We have just sent the address byte, and |
|
* now we must initiate the transfer. |
|
*/ |
|
if (i2c->msg_ptr == i2c->msg->len - 1 && |
|
i2c->msg_idx == i2c->msg_num - 1) |
|
icr |= ICR_STOP | ICR_ACKNAK; |
|
|
|
icr |= ICR_ALDIE | ICR_TB; |
|
} else if (i2c->msg_ptr < i2c->msg->len) { |
|
/* |
|
* Write mode. Write the next data byte. |
|
*/ |
|
writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c)); |
|
|
|
icr |= ICR_ALDIE | ICR_TB; |
|
|
|
/* |
|
* If this is the last byte of the last message or last byte |
|
* of any message with I2C_M_STOP (e.g. SCCB), send a STOP. |
|
*/ |
|
if ((i2c->msg_ptr == i2c->msg->len) && |
|
((i2c->msg->flags & I2C_M_STOP) || |
|
(i2c->msg_idx == i2c->msg_num - 1))) |
|
icr |= ICR_STOP; |
|
|
|
} else if (i2c->msg_idx < i2c->msg_num - 1) { |
|
/* |
|
* Next segment of the message. |
|
*/ |
|
i2c->msg_ptr = 0; |
|
i2c->msg_idx ++; |
|
i2c->msg++; |
|
|
|
/* |
|
* If we aren't doing a repeated start and address, |
|
* go back and try to send the next byte. Note that |
|
* we do not support switching the R/W direction here. |
|
*/ |
|
if (i2c->msg->flags & I2C_M_NOSTART) |
|
goto again; |
|
|
|
/* |
|
* Write the next address. |
|
*/ |
|
writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); |
|
i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); |
|
|
|
/* |
|
* And trigger a repeated start, and send the byte. |
|
*/ |
|
icr &= ~ICR_ALDIE; |
|
icr |= ICR_START | ICR_TB; |
|
} else { |
|
if (i2c->msg->len == 0) { |
|
/* |
|
* Device probes have a message length of zero |
|
* and need the bus to be reset before it can |
|
* be used again. |
|
*/ |
|
i2c_pxa_reset(i2c); |
|
} |
|
i2c_pxa_master_complete(i2c, 0); |
|
} |
|
|
|
i2c->icrlog[i2c->irqlogidx-1] = icr; |
|
|
|
writel(icr, _ICR(i2c)); |
|
show_state(i2c); |
|
} |
|
|
|
static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) |
|
{ |
|
u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); |
|
|
|
/* |
|
* Read the byte. |
|
*/ |
|
i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c)); |
|
|
|
if (i2c->msg_ptr < i2c->msg->len) { |
|
/* |
|
* If this is the last byte of the last |
|
* message, send a STOP. |
|
*/ |
|
if (i2c->msg_ptr == i2c->msg->len - 1) |
|
icr |= ICR_STOP | ICR_ACKNAK; |
|
|
|
icr |= ICR_ALDIE | ICR_TB; |
|
} else { |
|
i2c_pxa_master_complete(i2c, 0); |
|
} |
|
|
|
i2c->icrlog[i2c->irqlogidx-1] = icr; |
|
|
|
writel(icr, _ICR(i2c)); |
|
} |
|
|
|
#define VALID_INT_SOURCE (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \ |
|
ISR_SAD | ISR_BED) |
|
static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) |
|
{ |
|
struct pxa_i2c *i2c = dev_id; |
|
u32 isr = readl(_ISR(i2c)); |
|
|
|
if (!(isr & VALID_INT_SOURCE)) |
|
return IRQ_NONE; |
|
|
|
if (i2c_debug > 2 && 0) { |
|
dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n", |
|
__func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c))); |
|
decode_ISR(isr); |
|
} |
|
|
|
if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog)) |
|
i2c->isrlog[i2c->irqlogidx++] = isr; |
|
|
|
show_state(i2c); |
|
|
|
/* |
|
* Always clear all pending IRQs. |
|
*/ |
|
writel(isr & VALID_INT_SOURCE, _ISR(i2c)); |
|
|
|
if (isr & ISR_SAD) |
|
i2c_pxa_slave_start(i2c, isr); |
|
if (isr & ISR_SSD) |
|
i2c_pxa_slave_stop(i2c); |
|
|
|
if (i2c_pxa_is_slavemode(i2c)) { |
|
if (isr & ISR_ITE) |
|
i2c_pxa_slave_txempty(i2c, isr); |
|
if (isr & ISR_IRF) |
|
i2c_pxa_slave_rxfull(i2c, isr); |
|
} else if (i2c->msg && (!i2c->highmode_enter)) { |
|
if (isr & ISR_ITE) |
|
i2c_pxa_irq_txempty(i2c, isr); |
|
if (isr & ISR_IRF) |
|
i2c_pxa_irq_rxfull(i2c, isr); |
|
} else if ((isr & ISR_ITE) && i2c->highmode_enter) { |
|
i2c->highmode_enter = false; |
|
wake_up(&i2c->wait); |
|
} else { |
|
i2c_pxa_scream_blue_murder(i2c, "spurious irq"); |
|
} |
|
|
|
return IRQ_HANDLED; |
|
} |
|
|
|
|
|
static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) |
|
{ |
|
struct pxa_i2c *i2c = adap->algo_data; |
|
int ret, i; |
|
|
|
for (i = adap->retries; i >= 0; i--) { |
|
ret = i2c_pxa_do_xfer(i2c, msgs, num); |
|
if (ret != I2C_RETRY) |
|
goto out; |
|
|
|
if (i2c_debug) |
|
dev_dbg(&adap->dev, "Retrying transmission\n"); |
|
udelay(100); |
|
} |
|
i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); |
|
ret = -EREMOTEIO; |
|
out: |
|
i2c_pxa_set_slave(i2c, ret); |
|
return ret; |
|
} |
|
|
|
static u32 i2c_pxa_functionality(struct i2c_adapter *adap) |
|
{ |
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | |
|
I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART; |
|
} |
|
|
|
static const struct i2c_algorithm i2c_pxa_algorithm = { |
|
.master_xfer = i2c_pxa_xfer, |
|
.functionality = i2c_pxa_functionality, |
|
}; |
|
|
|
static const struct i2c_algorithm i2c_pxa_pio_algorithm = { |
|
.master_xfer = i2c_pxa_pio_xfer, |
|
.functionality = i2c_pxa_functionality, |
|
}; |
|
|
|
static const struct of_device_id i2c_pxa_dt_ids[] = { |
|
{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, |
|
{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, |
|
{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 }, |
|
{} |
|
}; |
|
MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); |
|
|
|
static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, |
|
enum pxa_i2c_types *i2c_types) |
|
{ |
|
struct device_node *np = pdev->dev.of_node; |
|
const struct of_device_id *of_id = |
|
of_match_device(i2c_pxa_dt_ids, &pdev->dev); |
|
|
|
if (!of_id) |
|
return 1; |
|
|
|
/* For device tree we always use the dynamic or alias-assigned ID */ |
|
i2c->adap.nr = -1; |
|
|
|
if (of_get_property(np, "mrvl,i2c-polling", NULL)) |
|
i2c->use_pio = 1; |
|
if (of_get_property(np, "mrvl,i2c-fast-mode", NULL)) |
|
i2c->fast_mode = 1; |
|
|
|
*i2c_types = (enum pxa_i2c_types)(of_id->data); |
|
|
|
return 0; |
|
} |
|
|
|
static int i2c_pxa_probe_pdata(struct platform_device *pdev, |
|
struct pxa_i2c *i2c, |
|
enum pxa_i2c_types *i2c_types) |
|
{ |
|
struct i2c_pxa_platform_data *plat = dev_get_platdata(&pdev->dev); |
|
const struct platform_device_id *id = platform_get_device_id(pdev); |
|
|
|
*i2c_types = id->driver_data; |
|
if (plat) { |
|
i2c->use_pio = plat->use_pio; |
|
i2c->fast_mode = plat->fast_mode; |
|
i2c->high_mode = plat->high_mode; |
|
i2c->master_code = plat->master_code; |
|
if (!i2c->master_code) |
|
i2c->master_code = 0xe; |
|
i2c->rate = plat->rate; |
|
} |
|
return 0; |
|
} |
|
|
|
static int i2c_pxa_probe(struct platform_device *dev) |
|
{ |
|
struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev); |
|
enum pxa_i2c_types i2c_type; |
|
struct pxa_i2c *i2c; |
|
struct resource *res = NULL; |
|
int ret, irq; |
|
|
|
i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL); |
|
if (!i2c) |
|
return -ENOMEM; |
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
|
i2c->reg_base = devm_ioremap_resource(&dev->dev, res); |
|
if (IS_ERR(i2c->reg_base)) |
|
return PTR_ERR(i2c->reg_base); |
|
|
|
irq = platform_get_irq(dev, 0); |
|
if (irq < 0) { |
|
dev_err(&dev->dev, "no irq resource: %d\n", irq); |
|
return irq; |
|
} |
|
|
|
/* Default adapter num to device id; i2c_pxa_probe_dt can override. */ |
|
i2c->adap.nr = dev->id; |
|
|
|
ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type); |
|
if (ret > 0) |
|
ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type); |
|
if (ret < 0) |
|
return ret; |
|
|
|
i2c->adap.owner = THIS_MODULE; |
|
i2c->adap.retries = 5; |
|
|
|
spin_lock_init(&i2c->lock); |
|
init_waitqueue_head(&i2c->wait); |
|
|
|
strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name)); |
|
|
|
i2c->clk = devm_clk_get(&dev->dev, NULL); |
|
if (IS_ERR(i2c->clk)) { |
|
dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk)); |
|
return PTR_ERR(i2c->clk); |
|
} |
|
|
|
i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr; |
|
i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr; |
|
i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr; |
|
i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr; |
|
if (i2c_type != REGS_CE4100) |
|
i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar; |
|
|
|
if (i2c_type == REGS_PXA910) { |
|
i2c->reg_ilcr = i2c->reg_base + pxa_reg_layout[i2c_type].ilcr; |
|
i2c->reg_iwcr = i2c->reg_base + pxa_reg_layout[i2c_type].iwcr; |
|
} |
|
|
|
i2c->iobase = res->start; |
|
i2c->iosize = resource_size(res); |
|
|
|
i2c->irq = irq; |
|
|
|
i2c->slave_addr = I2C_PXA_SLAVE_ADDR; |
|
i2c->highmode_enter = false; |
|
|
|
if (plat) { |
|
#ifdef CONFIG_I2C_PXA_SLAVE |
|
i2c->slave_addr = plat->slave_addr; |
|
i2c->slave = plat->slave; |
|
#endif |
|
i2c->adap.class = plat->class; |
|
} |
|
|
|
if (i2c->high_mode) { |
|
if (i2c->rate) { |
|
clk_set_rate(i2c->clk, i2c->rate); |
|
pr_info("i2c: <%s> set rate to %ld\n", |
|
i2c->adap.name, clk_get_rate(i2c->clk)); |
|
} else |
|
pr_warn("i2c: <%s> clock rate not set\n", |
|
i2c->adap.name); |
|
} |
|
|
|
clk_prepare_enable(i2c->clk); |
|
|
|
if (i2c->use_pio) { |
|
i2c->adap.algo = &i2c_pxa_pio_algorithm; |
|
} else { |
|
i2c->adap.algo = &i2c_pxa_algorithm; |
|
ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler, |
|
IRQF_SHARED | IRQF_NO_SUSPEND, |
|
dev_name(&dev->dev), i2c); |
|
if (ret) { |
|
dev_err(&dev->dev, "failed to request irq: %d\n", ret); |
|
goto ereqirq; |
|
} |
|
} |
|
|
|
i2c_pxa_reset(i2c); |
|
|
|
i2c->adap.algo_data = i2c; |
|
i2c->adap.dev.parent = &dev->dev; |
|
#ifdef CONFIG_OF |
|
i2c->adap.dev.of_node = dev->dev.of_node; |
|
#endif |
|
|
|
ret = i2c_add_numbered_adapter(&i2c->adap); |
|
if (ret < 0) { |
|
dev_err(&dev->dev, "failed to add bus: %d\n", ret); |
|
goto ereqirq; |
|
} |
|
|
|
platform_set_drvdata(dev, i2c); |
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE |
|
dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n", |
|
i2c->slave_addr); |
|
#else |
|
dev_info(&i2c->adap.dev, " PXA I2C adapter\n"); |
|
#endif |
|
return 0; |
|
|
|
ereqirq: |
|
clk_disable_unprepare(i2c->clk); |
|
return ret; |
|
} |
|
|
|
static int i2c_pxa_remove(struct platform_device *dev) |
|
{ |
|
struct pxa_i2c *i2c = platform_get_drvdata(dev); |
|
|
|
i2c_del_adapter(&i2c->adap); |
|
|
|
clk_disable_unprepare(i2c->clk); |
|
|
|
return 0; |
|
} |
|
|
|
#ifdef CONFIG_PM |
|
static int i2c_pxa_suspend_noirq(struct device *dev) |
|
{ |
|
struct platform_device *pdev = to_platform_device(dev); |
|
struct pxa_i2c *i2c = platform_get_drvdata(pdev); |
|
|
|
clk_disable(i2c->clk); |
|
|
|
return 0; |
|
} |
|
|
|
static int i2c_pxa_resume_noirq(struct device *dev) |
|
{ |
|
struct platform_device *pdev = to_platform_device(dev); |
|
struct pxa_i2c *i2c = platform_get_drvdata(pdev); |
|
|
|
clk_enable(i2c->clk); |
|
i2c_pxa_reset(i2c); |
|
|
|
return 0; |
|
} |
|
|
|
static const struct dev_pm_ops i2c_pxa_dev_pm_ops = { |
|
.suspend_noirq = i2c_pxa_suspend_noirq, |
|
.resume_noirq = i2c_pxa_resume_noirq, |
|
}; |
|
|
|
#define I2C_PXA_DEV_PM_OPS (&i2c_pxa_dev_pm_ops) |
|
#else |
|
#define I2C_PXA_DEV_PM_OPS NULL |
|
#endif |
|
|
|
static struct platform_driver i2c_pxa_driver = { |
|
.probe = i2c_pxa_probe, |
|
.remove = i2c_pxa_remove, |
|
.driver = { |
|
.name = "pxa2xx-i2c", |
|
.pm = I2C_PXA_DEV_PM_OPS, |
|
.of_match_table = i2c_pxa_dt_ids, |
|
}, |
|
.id_table = i2c_pxa_id_table, |
|
}; |
|
|
|
static int __init i2c_adap_pxa_init(void) |
|
{ |
|
return platform_driver_register(&i2c_pxa_driver); |
|
} |
|
|
|
static void __exit i2c_adap_pxa_exit(void) |
|
{ |
|
platform_driver_unregister(&i2c_pxa_driver); |
|
} |
|
|
|
MODULE_LICENSE("GPL"); |
|
MODULE_ALIAS("platform:pxa2xx-i2c"); |
|
|
|
subsys_initcall(i2c_adap_pxa_init); |
|
module_exit(i2c_adap_pxa_exit);
|
|
|