You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
806 lines
25 KiB
806 lines
25 KiB
menuconfig REGULATOR |
|
bool "Voltage and Current Regulator Support" |
|
help |
|
Generic Voltage and Current Regulator support. |
|
|
|
This framework is designed to provide a generic interface to voltage |
|
and current regulators within the Linux kernel. It's intended to |
|
provide voltage and current control to client or consumer drivers and |
|
also provide status information to user space applications through a |
|
sysfs interface. |
|
|
|
The intention is to allow systems to dynamically control regulator |
|
output in order to save power and prolong battery life. This applies |
|
to both voltage regulators (where voltage output is controllable) and |
|
current sinks (where current output is controllable). |
|
|
|
This framework safely compiles out if not selected so that client |
|
drivers can still be used in systems with no software controllable |
|
regulators. |
|
|
|
If unsure, say no. |
|
|
|
|
|
if REGULATOR |
|
|
|
config REGULATOR_DEBUG |
|
bool "Regulator debug support" |
|
help |
|
Say yes here to enable debugging support. |
|
|
|
config REGULATOR_FIXED_VOLTAGE |
|
tristate "Fixed voltage regulator support" |
|
help |
|
This driver provides support for fixed voltage regulators, |
|
useful for systems which use a combination of software |
|
managed regulators and simple non-configurable regulators. |
|
|
|
config REGULATOR_VIRTUAL_CONSUMER |
|
tristate "Virtual regulator consumer support" |
|
help |
|
This driver provides a virtual consumer for the voltage and |
|
current regulator API which provides sysfs controls for |
|
configuring the supplies requested. This is mainly useful |
|
for test purposes. |
|
|
|
If unsure, say no. |
|
|
|
config REGULATOR_USERSPACE_CONSUMER |
|
tristate "Userspace regulator consumer support" |
|
help |
|
There are some classes of devices that are controlled entirely |
|
from user space. Userspace consumer driver provides ability to |
|
control power supplies for such devices. |
|
|
|
If unsure, say no. |
|
|
|
config REGULATOR_88PM800 |
|
tristate "Marvell 88PM800 Power regulators" |
|
depends on MFD_88PM800 |
|
help |
|
This driver supports Marvell 88PM800 voltage regulator chips. |
|
It delivers digitally programmable output, |
|
the voltage is programmed via I2C interface. |
|
It's suitable to support PXA988 chips to control VCC_MAIN and |
|
various voltages. |
|
|
|
config REGULATOR_88PM8607 |
|
tristate "Marvell 88PM8607 Power regulators" |
|
depends on MFD_88PM860X=y |
|
help |
|
This driver supports 88PM8607 voltage regulator chips. |
|
|
|
config REGULATOR_ACT8865 |
|
tristate "Active-semi act8865 voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver controls a active-semi act8865 voltage output |
|
regulator via I2C bus. |
|
|
|
config REGULATOR_AD5398 |
|
tristate "Analog Devices AD5398/AD5821 regulators" |
|
depends on I2C |
|
help |
|
This driver supports AD5398 and AD5821 current regulator chips. |
|
If building into module, its name is ad5398.ko. |
|
|
|
config REGULATOR_ANATOP |
|
tristate "Freescale i.MX on-chip ANATOP LDO regulators" |
|
depends on MFD_SYSCON |
|
help |
|
Say y here to support Freescale i.MX on-chip ANATOP LDOs |
|
regulators. It is recommended that this option be |
|
enabled on i.MX6 platform. |
|
|
|
config REGULATOR_AAT2870 |
|
tristate "AnalogicTech AAT2870 Regulators" |
|
depends on MFD_AAT2870_CORE |
|
help |
|
If you have a AnalogicTech AAT2870 say Y to enable the |
|
regulator driver. |
|
|
|
config REGULATOR_AB3100 |
|
tristate "ST-Ericsson AB3100 Regulator functions" |
|
depends on AB3100_CORE |
|
default y if AB3100_CORE |
|
help |
|
These regulators correspond to functionality in the |
|
AB3100 analog baseband dealing with power regulators |
|
for the system. |
|
|
|
config REGULATOR_AB8500 |
|
bool "ST-Ericsson AB8500 Power Regulators" |
|
depends on AB8500_CORE |
|
help |
|
This driver supports the regulators found on the ST-Ericsson mixed |
|
signal AB8500 PMIC |
|
|
|
config REGULATOR_ARIZONA |
|
tristate "Wolfson Arizona class devices" |
|
depends on MFD_ARIZONA |
|
depends on SND_SOC |
|
help |
|
Support for the regulators found on Wolfson Arizona class |
|
devices. |
|
|
|
config REGULATOR_AS3711 |
|
tristate "AS3711 PMIC" |
|
depends on MFD_AS3711 |
|
help |
|
This driver provides support for the voltage regulators on the |
|
AS3711 PMIC |
|
|
|
config REGULATOR_AS3722 |
|
tristate "AMS AS3722 PMIC Regulators" |
|
depends on MFD_AS3722 |
|
help |
|
This driver provides support for the voltage regulators on the |
|
AS3722 PMIC. This will enable support for all the software |
|
controllable DCDC/LDO regulators. |
|
|
|
config REGULATOR_AXP20X |
|
tristate "X-POWERS AXP20X PMIC Regulators" |
|
depends on MFD_AXP20X |
|
help |
|
This driver provides support for the voltage regulators on the |
|
AXP20X PMIC. |
|
|
|
config REGULATOR_BCM590XX |
|
tristate "Broadcom BCM590xx PMU Regulators" |
|
depends on MFD_BCM590XX |
|
help |
|
This driver provides support for the voltage regulators on the |
|
BCM590xx PMUs. This will enable support for the software |
|
controllable LDO/Switching regulators. |
|
|
|
config REGULATOR_DA903X |
|
tristate "Dialog Semiconductor DA9030/DA9034 regulators" |
|
depends on PMIC_DA903X |
|
help |
|
Say y here to support the BUCKs and LDOs regulators found on |
|
Dialog Semiconductor DA9030/DA9034 PMIC. |
|
|
|
config REGULATOR_DA9052 |
|
tristate "Dialog Semiconductor DA9052/DA9053 regulators" |
|
depends on PMIC_DA9052 |
|
help |
|
This driver supports the voltage regulators of DA9052-BC and |
|
DA9053-AA/Bx PMIC. |
|
|
|
config REGULATOR_DA9055 |
|
tristate "Dialog Semiconductor DA9055 regulators" |
|
depends on MFD_DA9055 |
|
help |
|
Say y here to support the BUCKs and LDOs regulators found on |
|
Dialog Semiconductor DA9055 PMIC. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called da9055-regulator. |
|
|
|
config REGULATOR_DA9062 |
|
tristate "Dialog Semiconductor DA9062 regulators" |
|
depends on MFD_DA9062 |
|
help |
|
Say y here to support the BUCKs and LDOs regulators found on |
|
DA9062 PMICs. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called da9062-regulator. |
|
|
|
config REGULATOR_DA9063 |
|
tristate "Dialog Semiconductor DA9063 regulators" |
|
depends on MFD_DA9063 |
|
help |
|
Say y here to support the BUCKs and LDOs regulators found on |
|
DA9063 PMICs. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called da9063-regulator. |
|
|
|
config REGULATOR_DA9210 |
|
tristate "Dialog Semiconductor DA9210 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support for the Dialog Semiconductor DA9210. |
|
The DA9210 is a multi-phase synchronous step down |
|
converter 12A DC-DC Buck controlled through an I2C |
|
interface. |
|
|
|
config REGULATOR_DA9211 |
|
tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support for the Dialog Semiconductor DA9211/DA9212 |
|
/DA9213/DA9214/DA9215. |
|
The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous |
|
step down converter 12A or 16A DC-DC Buck controlled through an I2C |
|
interface. |
|
|
|
config REGULATOR_DBX500_PRCMU |
|
bool |
|
|
|
config REGULATOR_DB8500_PRCMU |
|
bool "ST-Ericsson DB8500 Voltage Domain Regulators" |
|
depends on MFD_DB8500_PRCMU |
|
select REGULATOR_DBX500_PRCMU |
|
help |
|
This driver supports the voltage domain regulators controlled by the |
|
DB8500 PRCMU |
|
|
|
config REGULATOR_FAN53555 |
|
tristate "Fairchild FAN53555 Regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports Fairchild FAN53555 Digitally Programmable |
|
TinyBuck Regulator. The FAN53555 is a step-down switching voltage |
|
regulator that delivers a digitally programmable output from an |
|
input voltage supply of 2.5V to 5.5V. The output voltage is |
|
programmed through an I2C interface. |
|
|
|
config REGULATOR_GPIO |
|
tristate "GPIO regulator support" |
|
depends on GPIOLIB || COMPILE_TEST |
|
help |
|
This driver provides support for regulators that can be |
|
controlled via gpios. |
|
It is capable of supporting current and voltage regulators |
|
and the platform has to provide a mapping of GPIO-states |
|
to target volts/amps. |
|
|
|
config REGULATOR_HI6421 |
|
tristate "HiSilicon Hi6421 PMIC voltage regulator support" |
|
depends on MFD_HI6421_PMIC && OF |
|
help |
|
This driver provides support for the voltage regulators on the |
|
HiSilicon Hi6421 PMU / Codec IC. |
|
Hi6421 is a multi-function device which, on regulator part, provides |
|
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All |
|
of them come with support to either ECO (idle) or sleep mode. |
|
|
|
config REGULATOR_ISL9305 |
|
tristate "Intersil ISL9305 regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports ISL9305 voltage regulator chip. |
|
|
|
config REGULATOR_ISL6271A |
|
tristate "Intersil ISL6271A Power regulator" |
|
depends on I2C |
|
help |
|
This driver supports ISL6271A voltage regulator chip. |
|
|
|
config REGULATOR_LP3971 |
|
tristate "National Semiconductors LP3971 PMIC regulator driver" |
|
depends on I2C |
|
help |
|
Say Y here to support the voltage regulators and convertors |
|
on National Semiconductors LP3971 PMIC |
|
|
|
config REGULATOR_LP3972 |
|
tristate "National Semiconductors LP3972 PMIC regulator driver" |
|
depends on I2C |
|
help |
|
Say Y here to support the voltage regulators and convertors |
|
on National Semiconductors LP3972 PMIC |
|
|
|
config REGULATOR_LP872X |
|
tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports LP8720/LP8725 PMIC |
|
|
|
config REGULATOR_LP8755 |
|
tristate "TI LP8755 High Performance PMU driver" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports LP8755 High Performance PMU driver. This |
|
chip contains six step-down DC/DC converters which can support |
|
9 mode multiphase configuration. |
|
|
|
config REGULATOR_LP8788 |
|
tristate "TI LP8788 Power Regulators" |
|
depends on MFD_LP8788 |
|
help |
|
This driver supports LP8788 voltage regulator chip. |
|
|
|
config REGULATOR_LTC3589 |
|
tristate "LTC3589 8-output voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This enables support for the LTC3589, LTC3589-1, and LTC3589-2 |
|
8-output regulators controlled via I2C. |
|
|
|
config REGULATOR_MAX14577 |
|
tristate "Maxim 14577/77836 regulator" |
|
depends on MFD_MAX14577 |
|
help |
|
This driver controls a Maxim MAX14577/77836 regulator via I2C bus. |
|
The MAX14577 regulators include safeout LDO and charger current |
|
regulator. The MAX77836 has two additional LDOs. |
|
|
|
config REGULATOR_MAX1586 |
|
tristate "Maxim 1586/1587 voltage regulator" |
|
depends on I2C |
|
help |
|
This driver controls a Maxim 1586 or 1587 voltage output |
|
regulator via I2C bus. The provided regulator is suitable |
|
for PXA27x chips to control VCC_CORE and VCC_USIM voltages. |
|
|
|
config REGULATOR_MAX8649 |
|
tristate "Maxim 8649 voltage regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver controls a Maxim 8649 voltage output regulator via |
|
I2C bus. |
|
|
|
config REGULATOR_MAX8660 |
|
tristate "Maxim 8660/8661 voltage regulator" |
|
depends on I2C |
|
help |
|
This driver controls a Maxim 8660/8661 voltage output |
|
regulator via I2C bus. |
|
|
|
config REGULATOR_MAX8907 |
|
tristate "Maxim 8907 voltage regulator" |
|
depends on MFD_MAX8907 |
|
help |
|
This driver controls a Maxim 8907 voltage output regulator |
|
via I2C bus. The provided regulator is suitable for Tegra |
|
chip to control Step-Down DC-DC and LDOs. |
|
|
|
config REGULATOR_MAX8925 |
|
tristate "Maxim MAX8925 Power Management IC" |
|
depends on MFD_MAX8925 |
|
help |
|
Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. |
|
|
|
config REGULATOR_MAX8952 |
|
tristate "Maxim MAX8952 Power Management IC" |
|
depends on I2C |
|
help |
|
This driver controls a Maxim 8952 voltage output regulator |
|
via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS |
|
modes ranging from 0.77V to 1.40V by 0.01V steps. |
|
|
|
config REGULATOR_MAX8973 |
|
tristate "Maxim MAX8973 voltage regulator " |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down |
|
switching regulator delievers up to 9A of output current. Each |
|
phase operates at a 2MHz fixed frequency with a 120 deg shift |
|
from the adjacent phase, allowing the use of small magnetic component. |
|
|
|
config REGULATOR_MAX8997 |
|
tristate "Maxim 8997/8966 regulator" |
|
depends on MFD_MAX8997 |
|
help |
|
This driver controls a Maxim 8997/8966 regulator |
|
via I2C bus. The provided regulator is suitable for S5PC110, |
|
S5PV210, and Exynos-4 chips to control VCC_CORE and |
|
VCC_USIM voltages. |
|
|
|
config REGULATOR_MAX8998 |
|
tristate "Maxim 8998 voltage regulator" |
|
depends on MFD_MAX8998 |
|
help |
|
This driver controls a Maxim 8998 voltage output regulator |
|
via I2C bus. The provided regulator is suitable for S3C6410 |
|
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. |
|
|
|
config REGULATOR_MAX77686 |
|
tristate "Maxim 77686 regulator" |
|
depends on MFD_MAX77686 |
|
help |
|
This driver controls a Maxim 77686 regulator |
|
via I2C bus. The provided regulator is suitable for |
|
Exynos-4 chips to control VARM and VINT voltages. |
|
|
|
config REGULATOR_MAX77693 |
|
tristate "Maxim 77693/77843 regulator" |
|
depends on (MFD_MAX77693 || MFD_MAX77843) |
|
help |
|
This driver controls a Maxim 77693/77843 regulators via I2C bus. |
|
The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' |
|
and one current regulator 'CHARGER'. This is suitable for |
|
Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. |
|
|
|
config REGULATOR_MAX77802 |
|
tristate "Maxim 77802 regulator" |
|
depends on MFD_MAX77686 |
|
help |
|
This driver controls a Maxim 77802 regulator |
|
via I2C bus. The provided regulator is suitable for |
|
Exynos5420/Exynos5800 SoCs to control various voltages. |
|
It includes support for control of voltage and ramp speed. |
|
|
|
config REGULATOR_MC13XXX_CORE |
|
tristate |
|
|
|
config REGULATOR_MC13783 |
|
tristate "Freescale MC13783 regulator driver" |
|
depends on MFD_MC13XXX |
|
select REGULATOR_MC13XXX_CORE |
|
help |
|
Say y here to support the regulators found on the Freescale MC13783 |
|
PMIC. |
|
|
|
config REGULATOR_MC13892 |
|
tristate "Freescale MC13892 regulator driver" |
|
depends on MFD_MC13XXX |
|
select REGULATOR_MC13XXX_CORE |
|
help |
|
Say y here to support the regulators found on the Freescale MC13892 |
|
PMIC. |
|
|
|
config REGULATOR_MT6311 |
|
tristate "MediaTek MT6311 PMIC" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6311 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MT6392 |
|
tristate "MediaTek MT6392 PMIC" |
|
depends on MFD_MT6397 |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6392 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MT6397 |
|
tristate "MediaTek MT6397 PMIC" |
|
depends on MFD_MT6397 |
|
help |
|
Say y here to select this option to enable the power regulator of |
|
MediaTek MT6397 PMIC. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. |
|
|
|
config REGULATOR_MTK |
|
bool "MTK regulator subsystem" |
|
help |
|
Say Y here to select this option to enable |
|
mtk_regulator framework. |
|
This framework is for linux and non-linux regulator driver |
|
more easy to use for regulator users. |
|
|
|
config REGULATOR_PALMAS |
|
tristate "TI Palmas PMIC Regulators" |
|
depends on MFD_PALMAS |
|
help |
|
If you wish to control the regulators on the Palmas series of |
|
chips say Y here. This will enable support for all the software |
|
controllable SMPS/LDO regulators. |
|
|
|
The regulators available on Palmas series chips vary depending |
|
on the muxing. This is handled automatically in the driver by |
|
reading the mux info from OTP. |
|
|
|
config REGULATOR_PBIAS |
|
tristate "PBIAS OMAP regulator driver" |
|
depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON |
|
help |
|
Say y here to support pbias regulator for mmc1:SD card i/o |
|
on OMAP SoCs. |
|
This driver provides support for OMAP pbias modelled |
|
regulators. |
|
|
|
config REGULATOR_PCAP |
|
tristate "Motorola PCAP2 regulator driver" |
|
depends on EZX_PCAP |
|
help |
|
This driver provides support for the voltage regulators of the |
|
PCAP2 PMIC. |
|
|
|
config REGULATOR_PCF50633 |
|
tristate "NXP PCF50633 regulator driver" |
|
depends on MFD_PCF50633 |
|
help |
|
Say Y here to support the voltage regulators and convertors |
|
on PCF50633 |
|
|
|
config REGULATOR_PFUZE100 |
|
tristate "Freescale PFUZE100/PFUZE200 regulator driver" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
Say y here to support the regulators found on the Freescale |
|
PFUZE100/PFUZE200 PMIC. |
|
|
|
config REGULATOR_PWM |
|
tristate "PWM voltage regulator" |
|
depends on PWM |
|
help |
|
This driver supports PWM controlled voltage regulators. PWM |
|
duty cycle can increase or decrease the voltage. |
|
|
|
config REGULATOR_QCOM_RPM |
|
tristate "Qualcomm RPM regulator driver" |
|
depends on MFD_QCOM_RPM |
|
help |
|
If you say yes to this option, support will be included for the |
|
regulators exposed by the Resource Power Manager found in Qualcomm |
|
8660, 8960 and 8064 based devices. |
|
|
|
Say M here if you want to include support for the regulators on the |
|
Qualcomm RPM as a module. The module will be named |
|
"qcom_rpm-regulator". |
|
|
|
config REGULATOR_QCOM_SMD_RPM |
|
tristate "Qualcomm SMD based RPM regulator driver" |
|
depends on QCOM_SMD_RPM |
|
help |
|
If you say yes to this option, support will be included for the |
|
regulators exposed by the Resource Power Manager found in Qualcomm |
|
8974 based devices. |
|
|
|
Say M here if you want to include support for the regulators on the |
|
Qualcomm RPM as a module. The module will be named |
|
"qcom_smd-regulator". |
|
|
|
config REGULATOR_QCOM_SPMI |
|
tristate "Qualcomm SPMI regulator driver" |
|
depends on SPMI || COMPILE_TEST |
|
help |
|
If you say yes to this option, support will be included for the |
|
regulators found in Qualcomm SPMI PMICs. |
|
|
|
Say M here if you want to include support for the regulators on the |
|
Qualcomm SPMI PMICs as a module. The module will be named |
|
"qcom_spmi-regulator". |
|
|
|
config REGULATOR_RC5T583 |
|
tristate "RICOH RC5T583 Power regulators" |
|
depends on MFD_RC5T583 |
|
help |
|
Select this option to enable the power regulator of RICOH |
|
PMIC RC5T583. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. The device supports multiple DCDC/LDO |
|
outputs which can be controlled by i2c communication. |
|
|
|
config REGULATOR_RK808 |
|
tristate "Rockchip RK808 Power regulators" |
|
depends on MFD_RK808 |
|
help |
|
Select this option to enable the power regulator of ROCKCHIP |
|
PMIC RK808. |
|
This driver supports the control of different power rails of device |
|
through regulator interface. The device supports multiple DCDC/LDO |
|
outputs which can be controlled by i2c communication. |
|
|
|
config REGULATOR_RN5T618 |
|
tristate "Ricoh RN5T618 voltage regulators" |
|
depends on MFD_RN5T618 |
|
help |
|
Say y here to support the regulators found on Ricoh RN5T618 PMIC. |
|
|
|
config REGULATOR_RT5033 |
|
tristate "Richtek RT5033 Regulators" |
|
depends on MFD_RT5033 |
|
help |
|
This adds support for voltage and current regulators in Richtek |
|
RT5033 PMIC. The device supports multiple regulators like |
|
current source, LDO and Buck. |
|
|
|
config REGULATOR_S2MPA01 |
|
tristate "Samsung S2MPA01 voltage regulator" |
|
depends on MFD_SEC_CORE |
|
help |
|
This driver controls Samsung S2MPA01 voltage output regulator |
|
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. |
|
|
|
config REGULATOR_S2MPS11 |
|
tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator" |
|
depends on MFD_SEC_CORE |
|
help |
|
This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage |
|
output regulator via I2C bus. The chip is comprised of high efficient |
|
Buck converters including Dual-Phase Buck converter, Buck-Boost |
|
converter, various LDOs. |
|
|
|
config REGULATOR_S5M8767 |
|
tristate "Samsung S5M8767A voltage regulator" |
|
depends on MFD_SEC_CORE |
|
help |
|
This driver supports a Samsung S5M8767A voltage output regulator |
|
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and |
|
supports DVS mode with 8bits of output voltage control. |
|
|
|
config REGULATOR_SKY81452 |
|
tristate "Skyworks Solutions SKY81452 voltage regulator" |
|
depends on MFD_SKY81452 |
|
help |
|
This driver supports Skyworks SKY81452 voltage output regulator |
|
via I2C bus. SKY81452 has one voltage linear regulator can be |
|
programmed from 4.5V to 20V. |
|
|
|
This driver can also be built as a module. If so, the module |
|
will be called sky81452-regulator. |
|
|
|
config REGULATOR_TI_ABB |
|
tristate "TI Adaptive Body Bias on-chip LDO" |
|
depends on ARCH_OMAP |
|
help |
|
Select this option to support Texas Instruments' on-chip Adaptive Body |
|
Bias (ABB) LDO regulators. It is recommended that this option be |
|
enabled on required TI SoC. Certain Operating Performance Points |
|
on TI SoCs may be unstable without enabling this as it provides |
|
device specific optimized bias to allow/optimize functionality. |
|
|
|
config REGULATOR_STW481X_VMMC |
|
bool "ST Microelectronics STW481X VMMC regulator" |
|
depends on MFD_STW481X || COMPILE_TEST |
|
default y if MFD_STW481X |
|
help |
|
This driver supports the internal VMMC regulator in the STw481x |
|
PMIC chips. |
|
|
|
config REGULATOR_TPS51632 |
|
tristate "TI TPS51632 Power Regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports TPS51632 voltage regulator chip. |
|
The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
|
with Serial VID control and DVFS. |
|
The voltage output can be configure through I2C interface or PWM |
|
interface. |
|
|
|
config REGULATOR_TPS6105X |
|
tristate "TI TPS6105X Power regulators" |
|
depends on TPS6105X |
|
default y if TPS6105X |
|
help |
|
This driver supports TPS61050/TPS61052 voltage regulator chips. |
|
It is a single boost converter primarily for white LEDs and |
|
audio amplifiers. |
|
|
|
config REGULATOR_TPS62360 |
|
tristate "TI TPS6236x Power Regulator" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports TPS6236x voltage regulator chip. This |
|
regulator is meant for processor core supply. This chip is |
|
high-frequency synchronous step down dc-dc converter optimized |
|
for battery-powered portable applications. |
|
|
|
config REGULATOR_TPS65023 |
|
tristate "TI TPS65023 Power regulators" |
|
depends on I2C |
|
select REGMAP_I2C |
|
help |
|
This driver supports TPS65023 voltage regulator chips. TPS65023 provides |
|
three step-down converters and two general-purpose LDO voltage regulators. |
|
It supports TI's software based Class-2 SmartReflex implementation. |
|
|
|
config REGULATOR_TPS6507X |
|
tristate "TI TPS6507X Power regulators" |
|
depends on I2C |
|
help |
|
This driver supports TPS6507X voltage regulator chips. TPS6507X provides |
|
three step-down converters and two general-purpose LDO voltage regulators. |
|
It supports TI's software based Class-2 SmartReflex implementation. |
|
|
|
config REGULATOR_TPS65090 |
|
tristate "TI TPS65090 Power regulator" |
|
depends on MFD_TPS65090 |
|
help |
|
This driver provides support for the voltage regulators on the |
|
TI TPS65090 PMIC. |
|
|
|
config REGULATOR_TPS65217 |
|
tristate "TI TPS65217 Power regulators" |
|
depends on MFD_TPS65217 |
|
help |
|
This driver supports TPS65217 voltage regulator chips. TPS65217 |
|
provides three step-down converters and four general-purpose LDO |
|
voltage regulators. It supports software based voltage control |
|
for different voltage domains |
|
|
|
config REGULATOR_TPS65218 |
|
tristate "TI TPS65218 Power regulators" |
|
depends on MFD_TPS65218 && OF |
|
help |
|
This driver supports TPS65218 voltage regulator chips. TPS65218 |
|
provides six step-down converters and one general-purpose LDO |
|
voltage regulators. It supports software based voltage control |
|
for different voltage domains |
|
|
|
config REGULATOR_TPS6524X |
|
tristate "TI TPS6524X Power regulators" |
|
depends on SPI |
|
help |
|
This driver supports TPS6524X voltage regulator chips. TPS6524X |
|
provides three step-down converters and two general-purpose LDO |
|
voltage regulators. This device is interfaced using a customized |
|
serial interface currently supported on the sequencer serial |
|
port controller. |
|
|
|
config REGULATOR_TPS6586X |
|
tristate "TI TPS6586X Power regulators" |
|
depends on MFD_TPS6586X |
|
help |
|
This driver supports TPS6586X voltage regulator chips. |
|
|
|
config REGULATOR_TPS65910 |
|
tristate "TI TPS65910/TPS65911 Power Regulators" |
|
depends on MFD_TPS65910 |
|
help |
|
This driver supports TPS65910/TPS65911 voltage regulator chips. |
|
|
|
config REGULATOR_TPS65912 |
|
tristate "TI TPS65912 Power regulator" |
|
depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) |
|
help |
|
This driver supports TPS65912 voltage regulator chip. |
|
|
|
config REGULATOR_TPS80031 |
|
tristate "TI TPS80031/TPS80032 power regualtor driver" |
|
depends on MFD_TPS80031 |
|
help |
|
TPS80031/ TPS80032 Fully Integrated Power Management with Power |
|
Path and Battery Charger. It has 5 configurable step-down |
|
converters, 11 general purpose LDOs, VBUS generator and digital |
|
output to control regulators. |
|
|
|
config REGULATOR_TWL4030 |
|
tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
|
depends on TWL4030_CORE |
|
help |
|
This driver supports the voltage regulators provided by |
|
this family of companion chips. |
|
|
|
config REGULATOR_VEXPRESS |
|
tristate "Versatile Express regulators" |
|
depends on VEXPRESS_CONFIG |
|
help |
|
This driver provides support for voltage regulators available |
|
on the ARM Ltd's Versatile Express platform. |
|
|
|
config REGULATOR_WM831X |
|
tristate "Wolfson Microelectronics WM831x PMIC regulators" |
|
depends on MFD_WM831X |
|
help |
|
Support the voltage and current regulators of the WM831x series |
|
of PMIC devices. |
|
|
|
config REGULATOR_WM8350 |
|
tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" |
|
depends on MFD_WM8350 |
|
help |
|
This driver provides support for the voltage and current regulators |
|
of the WM8350 AudioPlus PMIC. |
|
|
|
config REGULATOR_WM8400 |
|
tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" |
|
depends on MFD_WM8400 |
|
help |
|
This driver provides support for the voltage regulators of the |
|
WM8400 AudioPlus PMIC. |
|
|
|
config REGULATOR_WM8994 |
|
tristate "Wolfson Microelectronics WM8994 CODEC" |
|
depends on MFD_WM8994 |
|
help |
|
This driver provides support for the voltage regulators on the |
|
WM8994 CODEC. |
|
|
|
endif |
|
|
|
|