You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1946 lines
48 KiB
1946 lines
48 KiB
/* |
|
* USB Host Controller Driver for IMX21 |
|
* |
|
* Copyright (C) 2006 Loping Dog Embedded Systems |
|
* Copyright (C) 2009 Martin Fuzzey |
|
* Originally written by Jay Monkman <jtm@lopingdog.com> |
|
* Ported to 2.6.30, debugged and enhanced by Martin Fuzzey |
|
* |
|
* This program is free software; you can redistribute it and/or modify it |
|
* under the terms of the GNU General Public License as published by the |
|
* Free Software Foundation; either version 2 of the License, or (at your |
|
* option) any later version. |
|
* |
|
* This program is distributed in the hope that it will be useful, but |
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
|
* for more details. |
|
* |
|
* You should have received a copy of the GNU General Public License |
|
* along with this program; if not, write to the Free Software Foundation, |
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
|
*/ |
|
|
|
|
|
/* |
|
* The i.MX21 USB hardware contains |
|
* * 32 transfer descriptors (called ETDs) |
|
* * 4Kb of Data memory |
|
* |
|
* The data memory is shared between the host and function controllers |
|
* (but this driver only supports the host controller) |
|
* |
|
* So setting up a transfer involves: |
|
* * Allocating a ETD |
|
* * Fill in ETD with appropriate information |
|
* * Allocating data memory (and putting the offset in the ETD) |
|
* * Activate the ETD |
|
* * Get interrupt when done. |
|
* |
|
* An ETD is assigned to each active endpoint. |
|
* |
|
* Low resource (ETD and Data memory) situations are handled differently for |
|
* isochronous and non insosynchronous transactions : |
|
* |
|
* Non ISOC transfers are queued if either ETDs or Data memory are unavailable |
|
* |
|
* ISOC transfers use 2 ETDs per endpoint to achieve double buffering. |
|
* They allocate both ETDs and Data memory during URB submission |
|
* (and fail if unavailable). |
|
*/ |
|
|
|
#include <linux/clk.h> |
|
#include <linux/io.h> |
|
#include <linux/kernel.h> |
|
#include <linux/list.h> |
|
#include <linux/platform_device.h> |
|
#include <linux/slab.h> |
|
#include <linux/usb.h> |
|
#include <linux/usb/hcd.h> |
|
#include <linux/dma-mapping.h> |
|
#include <linux/module.h> |
|
|
|
#include "imx21-hcd.h" |
|
|
|
#ifdef CONFIG_DYNAMIC_DEBUG |
|
#define DEBUG |
|
#endif |
|
|
|
#ifdef DEBUG |
|
#define DEBUG_LOG_FRAME(imx21, etd, event) \ |
|
(etd)->event##_frame = readl((imx21)->regs + USBH_FRMNUB) |
|
#else |
|
#define DEBUG_LOG_FRAME(imx21, etd, event) do { } while (0) |
|
#endif |
|
|
|
static const char hcd_name[] = "imx21-hcd"; |
|
|
|
static inline struct imx21 *hcd_to_imx21(struct usb_hcd *hcd) |
|
{ |
|
return (struct imx21 *)hcd->hcd_priv; |
|
} |
|
|
|
|
|
/* =========================================== */ |
|
/* Hardware access helpers */ |
|
/* =========================================== */ |
|
|
|
static inline void set_register_bits(struct imx21 *imx21, u32 offset, u32 mask) |
|
{ |
|
void __iomem *reg = imx21->regs + offset; |
|
writel(readl(reg) | mask, reg); |
|
} |
|
|
|
static inline void clear_register_bits(struct imx21 *imx21, |
|
u32 offset, u32 mask) |
|
{ |
|
void __iomem *reg = imx21->regs + offset; |
|
writel(readl(reg) & ~mask, reg); |
|
} |
|
|
|
static inline void clear_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask) |
|
{ |
|
void __iomem *reg = imx21->regs + offset; |
|
|
|
if (readl(reg) & mask) |
|
writel(mask, reg); |
|
} |
|
|
|
static inline void set_toggle_bit(struct imx21 *imx21, u32 offset, u32 mask) |
|
{ |
|
void __iomem *reg = imx21->regs + offset; |
|
|
|
if (!(readl(reg) & mask)) |
|
writel(mask, reg); |
|
} |
|
|
|
static void etd_writel(struct imx21 *imx21, int etd_num, int dword, u32 value) |
|
{ |
|
writel(value, imx21->regs + USB_ETD_DWORD(etd_num, dword)); |
|
} |
|
|
|
static u32 etd_readl(struct imx21 *imx21, int etd_num, int dword) |
|
{ |
|
return readl(imx21->regs + USB_ETD_DWORD(etd_num, dword)); |
|
} |
|
|
|
static inline int wrap_frame(int counter) |
|
{ |
|
return counter & 0xFFFF; |
|
} |
|
|
|
static inline int frame_after(int frame, int after) |
|
{ |
|
/* handle wrapping like jiffies time_afer */ |
|
return (s16)((s16)after - (s16)frame) < 0; |
|
} |
|
|
|
static int imx21_hc_get_frame(struct usb_hcd *hcd) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
|
|
return wrap_frame(readl(imx21->regs + USBH_FRMNUB)); |
|
} |
|
|
|
static inline bool unsuitable_for_dma(dma_addr_t addr) |
|
{ |
|
return (addr & 3) != 0; |
|
} |
|
|
|
#include "imx21-dbg.c" |
|
|
|
static void nonisoc_urb_completed_for_etd( |
|
struct imx21 *imx21, struct etd_priv *etd, int status); |
|
static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb); |
|
static void free_dmem(struct imx21 *imx21, struct etd_priv *etd); |
|
|
|
/* =========================================== */ |
|
/* ETD management */ |
|
/* =========================================== */ |
|
|
|
static int alloc_etd(struct imx21 *imx21) |
|
{ |
|
int i; |
|
struct etd_priv *etd = imx21->etd; |
|
|
|
for (i = 0; i < USB_NUM_ETD; i++, etd++) { |
|
if (etd->alloc == 0) { |
|
memset(etd, 0, sizeof(imx21->etd[0])); |
|
etd->alloc = 1; |
|
debug_etd_allocated(imx21); |
|
return i; |
|
} |
|
} |
|
return -1; |
|
} |
|
|
|
static void disactivate_etd(struct imx21 *imx21, int num) |
|
{ |
|
int etd_mask = (1 << num); |
|
struct etd_priv *etd = &imx21->etd[num]; |
|
|
|
writel(etd_mask, imx21->regs + USBH_ETDENCLR); |
|
clear_register_bits(imx21, USBH_ETDDONEEN, etd_mask); |
|
writel(etd_mask, imx21->regs + USB_ETDDMACHANLCLR); |
|
clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask); |
|
|
|
etd->active_count = 0; |
|
|
|
DEBUG_LOG_FRAME(imx21, etd, disactivated); |
|
} |
|
|
|
static void reset_etd(struct imx21 *imx21, int num) |
|
{ |
|
struct etd_priv *etd = imx21->etd + num; |
|
int i; |
|
|
|
disactivate_etd(imx21, num); |
|
|
|
for (i = 0; i < 4; i++) |
|
etd_writel(imx21, num, i, 0); |
|
etd->urb = NULL; |
|
etd->ep = NULL; |
|
etd->td = NULL; |
|
etd->bounce_buffer = NULL; |
|
} |
|
|
|
static void free_etd(struct imx21 *imx21, int num) |
|
{ |
|
if (num < 0) |
|
return; |
|
|
|
if (num >= USB_NUM_ETD) { |
|
dev_err(imx21->dev, "BAD etd=%d!\n", num); |
|
return; |
|
} |
|
if (imx21->etd[num].alloc == 0) { |
|
dev_err(imx21->dev, "ETD %d already free!\n", num); |
|
return; |
|
} |
|
|
|
debug_etd_freed(imx21); |
|
reset_etd(imx21, num); |
|
memset(&imx21->etd[num], 0, sizeof(imx21->etd[0])); |
|
} |
|
|
|
|
|
static void setup_etd_dword0(struct imx21 *imx21, |
|
int etd_num, struct urb *urb, u8 dir, u16 maxpacket) |
|
{ |
|
etd_writel(imx21, etd_num, 0, |
|
((u32) usb_pipedevice(urb->pipe)) << DW0_ADDRESS | |
|
((u32) usb_pipeendpoint(urb->pipe) << DW0_ENDPNT) | |
|
((u32) dir << DW0_DIRECT) | |
|
((u32) ((urb->dev->speed == USB_SPEED_LOW) ? |
|
1 : 0) << DW0_SPEED) | |
|
((u32) fmt_urb_to_etd[usb_pipetype(urb->pipe)] << DW0_FORMAT) | |
|
((u32) maxpacket << DW0_MAXPKTSIZ)); |
|
} |
|
|
|
/** |
|
* Copy buffer to data controller data memory. |
|
* We cannot use memcpy_toio() because the hardware requires 32bit writes |
|
*/ |
|
static void copy_to_dmem( |
|
struct imx21 *imx21, int dmem_offset, void *src, int count) |
|
{ |
|
void __iomem *dmem = imx21->regs + USBOTG_DMEM + dmem_offset; |
|
u32 word = 0; |
|
u8 *p = src; |
|
int byte = 0; |
|
int i; |
|
|
|
for (i = 0; i < count; i++) { |
|
byte = i % 4; |
|
word += (*p++ << (byte * 8)); |
|
if (byte == 3) { |
|
writel(word, dmem); |
|
dmem += 4; |
|
word = 0; |
|
} |
|
} |
|
|
|
if (count && byte != 3) |
|
writel(word, dmem); |
|
} |
|
|
|
static void activate_etd(struct imx21 *imx21, int etd_num, u8 dir) |
|
{ |
|
u32 etd_mask = 1 << etd_num; |
|
struct etd_priv *etd = &imx21->etd[etd_num]; |
|
|
|
if (etd->dma_handle && unsuitable_for_dma(etd->dma_handle)) { |
|
/* For non aligned isoc the condition below is always true */ |
|
if (etd->len <= etd->dmem_size) { |
|
/* Fits into data memory, use PIO */ |
|
if (dir != TD_DIR_IN) { |
|
copy_to_dmem(imx21, |
|
etd->dmem_offset, |
|
etd->cpu_buffer, etd->len); |
|
} |
|
etd->dma_handle = 0; |
|
|
|
} else { |
|
/* Too big for data memory, use bounce buffer */ |
|
enum dma_data_direction dmadir; |
|
|
|
if (dir == TD_DIR_IN) { |
|
dmadir = DMA_FROM_DEVICE; |
|
etd->bounce_buffer = kmalloc(etd->len, |
|
GFP_ATOMIC); |
|
} else { |
|
dmadir = DMA_TO_DEVICE; |
|
etd->bounce_buffer = kmemdup(etd->cpu_buffer, |
|
etd->len, |
|
GFP_ATOMIC); |
|
} |
|
if (!etd->bounce_buffer) { |
|
dev_err(imx21->dev, "failed bounce alloc\n"); |
|
goto err_bounce_alloc; |
|
} |
|
|
|
etd->dma_handle = |
|
dma_map_single(imx21->dev, |
|
etd->bounce_buffer, |
|
etd->len, |
|
dmadir); |
|
if (dma_mapping_error(imx21->dev, etd->dma_handle)) { |
|
dev_err(imx21->dev, "failed bounce map\n"); |
|
goto err_bounce_map; |
|
} |
|
} |
|
} |
|
|
|
clear_toggle_bit(imx21, USBH_ETDDONESTAT, etd_mask); |
|
set_register_bits(imx21, USBH_ETDDONEEN, etd_mask); |
|
clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); |
|
clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); |
|
|
|
if (etd->dma_handle) { |
|
set_register_bits(imx21, USB_ETDDMACHANLCLR, etd_mask); |
|
clear_toggle_bit(imx21, USBH_XBUFSTAT, etd_mask); |
|
clear_toggle_bit(imx21, USBH_YBUFSTAT, etd_mask); |
|
writel(etd->dma_handle, imx21->regs + USB_ETDSMSA(etd_num)); |
|
set_register_bits(imx21, USB_ETDDMAEN, etd_mask); |
|
} else { |
|
if (dir != TD_DIR_IN) { |
|
/* need to set for ZLP and PIO */ |
|
set_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); |
|
set_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); |
|
} |
|
} |
|
|
|
DEBUG_LOG_FRAME(imx21, etd, activated); |
|
|
|
#ifdef DEBUG |
|
if (!etd->active_count) { |
|
int i; |
|
etd->activated_frame = readl(imx21->regs + USBH_FRMNUB); |
|
etd->disactivated_frame = -1; |
|
etd->last_int_frame = -1; |
|
etd->last_req_frame = -1; |
|
|
|
for (i = 0; i < 4; i++) |
|
etd->submitted_dwords[i] = etd_readl(imx21, etd_num, i); |
|
} |
|
#endif |
|
|
|
etd->active_count = 1; |
|
writel(etd_mask, imx21->regs + USBH_ETDENSET); |
|
return; |
|
|
|
err_bounce_map: |
|
kfree(etd->bounce_buffer); |
|
|
|
err_bounce_alloc: |
|
free_dmem(imx21, etd); |
|
nonisoc_urb_completed_for_etd(imx21, etd, -ENOMEM); |
|
} |
|
|
|
/* =========================================== */ |
|
/* Data memory management */ |
|
/* =========================================== */ |
|
|
|
static int alloc_dmem(struct imx21 *imx21, unsigned int size, |
|
struct usb_host_endpoint *ep) |
|
{ |
|
unsigned int offset = 0; |
|
struct imx21_dmem_area *area; |
|
struct imx21_dmem_area *tmp; |
|
|
|
size += (~size + 1) & 0x3; /* Round to 4 byte multiple */ |
|
|
|
if (size > DMEM_SIZE) { |
|
dev_err(imx21->dev, "size=%d > DMEM_SIZE(%d)\n", |
|
size, DMEM_SIZE); |
|
return -EINVAL; |
|
} |
|
|
|
list_for_each_entry(tmp, &imx21->dmem_list, list) { |
|
if ((size + offset) < offset) |
|
goto fail; |
|
if ((size + offset) <= tmp->offset) |
|
break; |
|
offset = tmp->size + tmp->offset; |
|
if ((offset + size) > DMEM_SIZE) |
|
goto fail; |
|
} |
|
|
|
area = kmalloc(sizeof(struct imx21_dmem_area), GFP_ATOMIC); |
|
if (area == NULL) |
|
return -ENOMEM; |
|
|
|
area->ep = ep; |
|
area->offset = offset; |
|
area->size = size; |
|
list_add_tail(&area->list, &tmp->list); |
|
debug_dmem_allocated(imx21, size); |
|
return offset; |
|
|
|
fail: |
|
return -ENOMEM; |
|
} |
|
|
|
/* Memory now available for a queued ETD - activate it */ |
|
static void activate_queued_etd(struct imx21 *imx21, |
|
struct etd_priv *etd, u32 dmem_offset) |
|
{ |
|
struct urb_priv *urb_priv = etd->urb->hcpriv; |
|
int etd_num = etd - &imx21->etd[0]; |
|
u32 maxpacket = etd_readl(imx21, etd_num, 1) >> DW1_YBUFSRTAD; |
|
u8 dir = (etd_readl(imx21, etd_num, 2) >> DW2_DIRPID) & 0x03; |
|
|
|
dev_dbg(imx21->dev, "activating queued ETD %d now DMEM available\n", |
|
etd_num); |
|
etd_writel(imx21, etd_num, 1, |
|
((dmem_offset + maxpacket) << DW1_YBUFSRTAD) | dmem_offset); |
|
|
|
etd->dmem_offset = dmem_offset; |
|
urb_priv->active = 1; |
|
activate_etd(imx21, etd_num, dir); |
|
} |
|
|
|
static void free_dmem(struct imx21 *imx21, struct etd_priv *etd) |
|
{ |
|
struct imx21_dmem_area *area; |
|
struct etd_priv *tmp; |
|
int found = 0; |
|
int offset; |
|
|
|
if (!etd->dmem_size) |
|
return; |
|
etd->dmem_size = 0; |
|
|
|
offset = etd->dmem_offset; |
|
list_for_each_entry(area, &imx21->dmem_list, list) { |
|
if (area->offset == offset) { |
|
debug_dmem_freed(imx21, area->size); |
|
list_del(&area->list); |
|
kfree(area); |
|
found = 1; |
|
break; |
|
} |
|
} |
|
|
|
if (!found) { |
|
dev_err(imx21->dev, |
|
"Trying to free unallocated DMEM %d\n", offset); |
|
return; |
|
} |
|
|
|
/* Try again to allocate memory for anything we've queued */ |
|
list_for_each_entry_safe(etd, tmp, &imx21->queue_for_dmem, queue) { |
|
offset = alloc_dmem(imx21, etd->dmem_size, etd->ep); |
|
if (offset >= 0) { |
|
list_del(&etd->queue); |
|
activate_queued_etd(imx21, etd, (u32)offset); |
|
} |
|
} |
|
} |
|
|
|
static void free_epdmem(struct imx21 *imx21, struct usb_host_endpoint *ep) |
|
{ |
|
struct imx21_dmem_area *area, *tmp; |
|
|
|
list_for_each_entry_safe(area, tmp, &imx21->dmem_list, list) { |
|
if (area->ep == ep) { |
|
dev_err(imx21->dev, |
|
"Active DMEM %d for disabled ep=%p\n", |
|
area->offset, ep); |
|
list_del(&area->list); |
|
kfree(area); |
|
} |
|
} |
|
} |
|
|
|
|
|
/* =========================================== */ |
|
/* End handling */ |
|
/* =========================================== */ |
|
|
|
/* Endpoint now idle - release its ETD(s) or assign to queued request */ |
|
static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv) |
|
{ |
|
int i; |
|
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) { |
|
int etd_num = ep_priv->etd[i]; |
|
struct etd_priv *etd; |
|
if (etd_num < 0) |
|
continue; |
|
|
|
etd = &imx21->etd[etd_num]; |
|
ep_priv->etd[i] = -1; |
|
|
|
free_dmem(imx21, etd); /* for isoc */ |
|
|
|
if (list_empty(&imx21->queue_for_etd)) { |
|
free_etd(imx21, etd_num); |
|
continue; |
|
} |
|
|
|
dev_dbg(imx21->dev, |
|
"assigning idle etd %d for queued request\n", etd_num); |
|
ep_priv = list_first_entry(&imx21->queue_for_etd, |
|
struct ep_priv, queue); |
|
list_del(&ep_priv->queue); |
|
reset_etd(imx21, etd_num); |
|
ep_priv->waiting_etd = 0; |
|
ep_priv->etd[i] = etd_num; |
|
|
|
if (list_empty(&ep_priv->ep->urb_list)) { |
|
dev_err(imx21->dev, "No urb for queued ep!\n"); |
|
continue; |
|
} |
|
schedule_nonisoc_etd(imx21, list_first_entry( |
|
&ep_priv->ep->urb_list, struct urb, urb_list)); |
|
} |
|
} |
|
|
|
static void urb_done(struct usb_hcd *hcd, struct urb *urb, int status) |
|
__releases(imx21->lock) |
|
__acquires(imx21->lock) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
struct ep_priv *ep_priv = urb->ep->hcpriv; |
|
struct urb_priv *urb_priv = urb->hcpriv; |
|
|
|
debug_urb_completed(imx21, urb, status); |
|
dev_vdbg(imx21->dev, "urb %p done %d\n", urb, status); |
|
|
|
kfree(urb_priv->isoc_td); |
|
kfree(urb->hcpriv); |
|
urb->hcpriv = NULL; |
|
usb_hcd_unlink_urb_from_ep(hcd, urb); |
|
spin_unlock(&imx21->lock); |
|
usb_hcd_giveback_urb(hcd, urb, status); |
|
spin_lock(&imx21->lock); |
|
if (list_empty(&ep_priv->ep->urb_list)) |
|
ep_idle(imx21, ep_priv); |
|
} |
|
|
|
static void nonisoc_urb_completed_for_etd( |
|
struct imx21 *imx21, struct etd_priv *etd, int status) |
|
{ |
|
struct usb_host_endpoint *ep = etd->ep; |
|
|
|
urb_done(imx21->hcd, etd->urb, status); |
|
etd->urb = NULL; |
|
|
|
if (!list_empty(&ep->urb_list)) { |
|
struct urb *urb = list_first_entry( |
|
&ep->urb_list, struct urb, urb_list); |
|
|
|
dev_vdbg(imx21->dev, "next URB %p\n", urb); |
|
schedule_nonisoc_etd(imx21, urb); |
|
} |
|
} |
|
|
|
|
|
/* =========================================== */ |
|
/* ISOC Handling ... */ |
|
/* =========================================== */ |
|
|
|
static void schedule_isoc_etds(struct usb_hcd *hcd, |
|
struct usb_host_endpoint *ep) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
struct ep_priv *ep_priv = ep->hcpriv; |
|
struct etd_priv *etd; |
|
struct urb_priv *urb_priv; |
|
struct td *td; |
|
int etd_num; |
|
int i; |
|
int cur_frame; |
|
u8 dir; |
|
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) { |
|
too_late: |
|
if (list_empty(&ep_priv->td_list)) |
|
break; |
|
|
|
etd_num = ep_priv->etd[i]; |
|
if (etd_num < 0) |
|
break; |
|
|
|
etd = &imx21->etd[etd_num]; |
|
if (etd->urb) |
|
continue; |
|
|
|
td = list_entry(ep_priv->td_list.next, struct td, list); |
|
list_del(&td->list); |
|
urb_priv = td->urb->hcpriv; |
|
|
|
cur_frame = imx21_hc_get_frame(hcd); |
|
if (frame_after(cur_frame, td->frame)) { |
|
dev_dbg(imx21->dev, "isoc too late frame %d > %d\n", |
|
cur_frame, td->frame); |
|
urb_priv->isoc_status = -EXDEV; |
|
td->urb->iso_frame_desc[ |
|
td->isoc_index].actual_length = 0; |
|
td->urb->iso_frame_desc[td->isoc_index].status = -EXDEV; |
|
if (--urb_priv->isoc_remaining == 0) |
|
urb_done(hcd, td->urb, urb_priv->isoc_status); |
|
goto too_late; |
|
} |
|
|
|
urb_priv->active = 1; |
|
etd->td = td; |
|
etd->ep = td->ep; |
|
etd->urb = td->urb; |
|
etd->len = td->len; |
|
etd->dma_handle = td->dma_handle; |
|
etd->cpu_buffer = td->cpu_buffer; |
|
|
|
debug_isoc_submitted(imx21, cur_frame, td); |
|
|
|
dir = usb_pipeout(td->urb->pipe) ? TD_DIR_OUT : TD_DIR_IN; |
|
setup_etd_dword0(imx21, etd_num, td->urb, dir, etd->dmem_size); |
|
etd_writel(imx21, etd_num, 1, etd->dmem_offset); |
|
etd_writel(imx21, etd_num, 2, |
|
(TD_NOTACCESSED << DW2_COMPCODE) | |
|
((td->frame & 0xFFFF) << DW2_STARTFRM)); |
|
etd_writel(imx21, etd_num, 3, |
|
(TD_NOTACCESSED << DW3_COMPCODE0) | |
|
(td->len << DW3_PKTLEN0)); |
|
|
|
activate_etd(imx21, etd_num, dir); |
|
} |
|
} |
|
|
|
static void isoc_etd_done(struct usb_hcd *hcd, int etd_num) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
int etd_mask = 1 << etd_num; |
|
struct etd_priv *etd = imx21->etd + etd_num; |
|
struct urb *urb = etd->urb; |
|
struct urb_priv *urb_priv = urb->hcpriv; |
|
struct td *td = etd->td; |
|
struct usb_host_endpoint *ep = etd->ep; |
|
int isoc_index = td->isoc_index; |
|
unsigned int pipe = urb->pipe; |
|
int dir_in = usb_pipein(pipe); |
|
int cc; |
|
int bytes_xfrd; |
|
|
|
disactivate_etd(imx21, etd_num); |
|
|
|
cc = (etd_readl(imx21, etd_num, 3) >> DW3_COMPCODE0) & 0xf; |
|
bytes_xfrd = etd_readl(imx21, etd_num, 3) & 0x3ff; |
|
|
|
/* Input doesn't always fill the buffer, don't generate an error |
|
* when this happens. |
|
*/ |
|
if (dir_in && (cc == TD_DATAUNDERRUN)) |
|
cc = TD_CC_NOERROR; |
|
|
|
if (cc == TD_NOTACCESSED) |
|
bytes_xfrd = 0; |
|
|
|
debug_isoc_completed(imx21, |
|
imx21_hc_get_frame(hcd), td, cc, bytes_xfrd); |
|
if (cc) { |
|
urb_priv->isoc_status = -EXDEV; |
|
dev_dbg(imx21->dev, |
|
"bad iso cc=0x%X frame=%d sched frame=%d " |
|
"cnt=%d len=%d urb=%p etd=%d index=%d\n", |
|
cc, imx21_hc_get_frame(hcd), td->frame, |
|
bytes_xfrd, td->len, urb, etd_num, isoc_index); |
|
} |
|
|
|
if (dir_in) { |
|
clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); |
|
if (!etd->dma_handle) |
|
memcpy_fromio(etd->cpu_buffer, |
|
imx21->regs + USBOTG_DMEM + etd->dmem_offset, |
|
bytes_xfrd); |
|
} |
|
|
|
urb->actual_length += bytes_xfrd; |
|
urb->iso_frame_desc[isoc_index].actual_length = bytes_xfrd; |
|
urb->iso_frame_desc[isoc_index].status = cc_to_error[cc]; |
|
|
|
etd->td = NULL; |
|
etd->urb = NULL; |
|
etd->ep = NULL; |
|
|
|
if (--urb_priv->isoc_remaining == 0) |
|
urb_done(hcd, urb, urb_priv->isoc_status); |
|
|
|
schedule_isoc_etds(hcd, ep); |
|
} |
|
|
|
static struct ep_priv *alloc_isoc_ep( |
|
struct imx21 *imx21, struct usb_host_endpoint *ep) |
|
{ |
|
struct ep_priv *ep_priv; |
|
int i; |
|
|
|
ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC); |
|
if (!ep_priv) |
|
return NULL; |
|
|
|
for (i = 0; i < NUM_ISO_ETDS; i++) |
|
ep_priv->etd[i] = -1; |
|
|
|
INIT_LIST_HEAD(&ep_priv->td_list); |
|
ep_priv->ep = ep; |
|
ep->hcpriv = ep_priv; |
|
return ep_priv; |
|
} |
|
|
|
static int alloc_isoc_etds(struct imx21 *imx21, struct ep_priv *ep_priv) |
|
{ |
|
int i, j; |
|
int etd_num; |
|
|
|
/* Allocate the ETDs if required */ |
|
for (i = 0; i < NUM_ISO_ETDS; i++) { |
|
if (ep_priv->etd[i] < 0) { |
|
etd_num = alloc_etd(imx21); |
|
if (etd_num < 0) |
|
goto alloc_etd_failed; |
|
|
|
ep_priv->etd[i] = etd_num; |
|
imx21->etd[etd_num].ep = ep_priv->ep; |
|
} |
|
} |
|
return 0; |
|
|
|
alloc_etd_failed: |
|
dev_err(imx21->dev, "isoc: Couldn't allocate etd\n"); |
|
for (j = 0; j < i; j++) { |
|
free_etd(imx21, ep_priv->etd[j]); |
|
ep_priv->etd[j] = -1; |
|
} |
|
return -ENOMEM; |
|
} |
|
|
|
static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd, |
|
struct usb_host_endpoint *ep, |
|
struct urb *urb, gfp_t mem_flags) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
struct urb_priv *urb_priv; |
|
unsigned long flags; |
|
struct ep_priv *ep_priv; |
|
struct td *td = NULL; |
|
int i; |
|
int ret; |
|
int cur_frame; |
|
u16 maxpacket; |
|
|
|
urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags); |
|
if (urb_priv == NULL) |
|
return -ENOMEM; |
|
|
|
urb_priv->isoc_td = kzalloc( |
|
sizeof(struct td) * urb->number_of_packets, mem_flags); |
|
if (urb_priv->isoc_td == NULL) { |
|
ret = -ENOMEM; |
|
goto alloc_td_failed; |
|
} |
|
|
|
spin_lock_irqsave(&imx21->lock, flags); |
|
|
|
if (ep->hcpriv == NULL) { |
|
ep_priv = alloc_isoc_ep(imx21, ep); |
|
if (ep_priv == NULL) { |
|
ret = -ENOMEM; |
|
goto alloc_ep_failed; |
|
} |
|
} else { |
|
ep_priv = ep->hcpriv; |
|
} |
|
|
|
ret = alloc_isoc_etds(imx21, ep_priv); |
|
if (ret) |
|
goto alloc_etd_failed; |
|
|
|
ret = usb_hcd_link_urb_to_ep(hcd, urb); |
|
if (ret) |
|
goto link_failed; |
|
|
|
urb->status = -EINPROGRESS; |
|
urb->actual_length = 0; |
|
urb->error_count = 0; |
|
urb->hcpriv = urb_priv; |
|
urb_priv->ep = ep; |
|
|
|
/* allocate data memory for largest packets if not already done */ |
|
maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); |
|
for (i = 0; i < NUM_ISO_ETDS; i++) { |
|
struct etd_priv *etd = &imx21->etd[ep_priv->etd[i]]; |
|
|
|
if (etd->dmem_size > 0 && etd->dmem_size < maxpacket) { |
|
/* not sure if this can really occur.... */ |
|
dev_err(imx21->dev, "increasing isoc buffer %d->%d\n", |
|
etd->dmem_size, maxpacket); |
|
ret = -EMSGSIZE; |
|
goto alloc_dmem_failed; |
|
} |
|
|
|
if (etd->dmem_size == 0) { |
|
etd->dmem_offset = alloc_dmem(imx21, maxpacket, ep); |
|
if (etd->dmem_offset < 0) { |
|
dev_dbg(imx21->dev, "failed alloc isoc dmem\n"); |
|
ret = -EAGAIN; |
|
goto alloc_dmem_failed; |
|
} |
|
etd->dmem_size = maxpacket; |
|
} |
|
} |
|
|
|
/* calculate frame */ |
|
cur_frame = imx21_hc_get_frame(hcd); |
|
i = 0; |
|
if (list_empty(&ep_priv->td_list)) { |
|
urb->start_frame = wrap_frame(cur_frame + 5); |
|
} else { |
|
urb->start_frame = wrap_frame(list_entry(ep_priv->td_list.prev, |
|
struct td, list)->frame + urb->interval); |
|
|
|
if (frame_after(cur_frame, urb->start_frame)) { |
|
dev_dbg(imx21->dev, |
|
"enqueue: adjusting iso start %d (cur=%d) asap=%d\n", |
|
urb->start_frame, cur_frame, |
|
(urb->transfer_flags & URB_ISO_ASAP) != 0); |
|
i = DIV_ROUND_UP(wrap_frame( |
|
cur_frame - urb->start_frame), |
|
urb->interval); |
|
|
|
/* Treat underruns as if URB_ISO_ASAP was set */ |
|
if ((urb->transfer_flags & URB_ISO_ASAP) || |
|
i >= urb->number_of_packets) { |
|
urb->start_frame = wrap_frame(urb->start_frame |
|
+ i * urb->interval); |
|
i = 0; |
|
} |
|
} |
|
} |
|
|
|
/* set up transfers */ |
|
urb_priv->isoc_remaining = urb->number_of_packets - i; |
|
td = urb_priv->isoc_td; |
|
for (; i < urb->number_of_packets; i++, td++) { |
|
unsigned int offset = urb->iso_frame_desc[i].offset; |
|
td->ep = ep; |
|
td->urb = urb; |
|
td->len = urb->iso_frame_desc[i].length; |
|
td->isoc_index = i; |
|
td->frame = wrap_frame(urb->start_frame + urb->interval * i); |
|
td->dma_handle = urb->transfer_dma + offset; |
|
td->cpu_buffer = urb->transfer_buffer + offset; |
|
list_add_tail(&td->list, &ep_priv->td_list); |
|
} |
|
|
|
dev_vdbg(imx21->dev, "setup %d packets for iso frame %d->%d\n", |
|
urb->number_of_packets, urb->start_frame, td->frame); |
|
|
|
debug_urb_submitted(imx21, urb); |
|
schedule_isoc_etds(hcd, ep); |
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
return 0; |
|
|
|
alloc_dmem_failed: |
|
usb_hcd_unlink_urb_from_ep(hcd, urb); |
|
|
|
link_failed: |
|
alloc_etd_failed: |
|
alloc_ep_failed: |
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
kfree(urb_priv->isoc_td); |
|
|
|
alloc_td_failed: |
|
kfree(urb_priv); |
|
return ret; |
|
} |
|
|
|
static void dequeue_isoc_urb(struct imx21 *imx21, |
|
struct urb *urb, struct ep_priv *ep_priv) |
|
{ |
|
struct urb_priv *urb_priv = urb->hcpriv; |
|
struct td *td, *tmp; |
|
int i; |
|
|
|
if (urb_priv->active) { |
|
for (i = 0; i < NUM_ISO_ETDS; i++) { |
|
int etd_num = ep_priv->etd[i]; |
|
if (etd_num != -1 && imx21->etd[etd_num].urb == urb) { |
|
struct etd_priv *etd = imx21->etd + etd_num; |
|
|
|
reset_etd(imx21, etd_num); |
|
free_dmem(imx21, etd); |
|
} |
|
} |
|
} |
|
|
|
list_for_each_entry_safe(td, tmp, &ep_priv->td_list, list) { |
|
if (td->urb == urb) { |
|
dev_vdbg(imx21->dev, "removing td %p\n", td); |
|
list_del(&td->list); |
|
} |
|
} |
|
} |
|
|
|
/* =========================================== */ |
|
/* NON ISOC Handling ... */ |
|
/* =========================================== */ |
|
|
|
static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb) |
|
{ |
|
unsigned int pipe = urb->pipe; |
|
struct urb_priv *urb_priv = urb->hcpriv; |
|
struct ep_priv *ep_priv = urb_priv->ep->hcpriv; |
|
int state = urb_priv->state; |
|
int etd_num = ep_priv->etd[0]; |
|
struct etd_priv *etd; |
|
u32 count; |
|
u16 etd_buf_size; |
|
u16 maxpacket; |
|
u8 dir; |
|
u8 bufround; |
|
u8 datatoggle; |
|
u8 interval = 0; |
|
u8 relpolpos = 0; |
|
|
|
if (etd_num < 0) { |
|
dev_err(imx21->dev, "No valid ETD\n"); |
|
return; |
|
} |
|
if (readl(imx21->regs + USBH_ETDENSET) & (1 << etd_num)) |
|
dev_err(imx21->dev, "submitting to active ETD %d\n", etd_num); |
|
|
|
etd = &imx21->etd[etd_num]; |
|
maxpacket = usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)); |
|
if (!maxpacket) |
|
maxpacket = 8; |
|
|
|
if (usb_pipecontrol(pipe) && (state != US_CTRL_DATA)) { |
|
if (state == US_CTRL_SETUP) { |
|
dir = TD_DIR_SETUP; |
|
if (unsuitable_for_dma(urb->setup_dma)) |
|
usb_hcd_unmap_urb_setup_for_dma(imx21->hcd, |
|
urb); |
|
etd->dma_handle = urb->setup_dma; |
|
etd->cpu_buffer = urb->setup_packet; |
|
bufround = 0; |
|
count = 8; |
|
datatoggle = TD_TOGGLE_DATA0; |
|
} else { /* US_CTRL_ACK */ |
|
dir = usb_pipeout(pipe) ? TD_DIR_IN : TD_DIR_OUT; |
|
bufround = 0; |
|
count = 0; |
|
datatoggle = TD_TOGGLE_DATA1; |
|
} |
|
} else { |
|
dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN; |
|
bufround = (dir == TD_DIR_IN) ? 1 : 0; |
|
if (unsuitable_for_dma(urb->transfer_dma)) |
|
usb_hcd_unmap_urb_for_dma(imx21->hcd, urb); |
|
|
|
etd->dma_handle = urb->transfer_dma; |
|
etd->cpu_buffer = urb->transfer_buffer; |
|
if (usb_pipebulk(pipe) && (state == US_BULK0)) |
|
count = 0; |
|
else |
|
count = urb->transfer_buffer_length; |
|
|
|
if (usb_pipecontrol(pipe)) { |
|
datatoggle = TD_TOGGLE_DATA1; |
|
} else { |
|
if (usb_gettoggle( |
|
urb->dev, |
|
usb_pipeendpoint(urb->pipe), |
|
usb_pipeout(urb->pipe))) |
|
datatoggle = TD_TOGGLE_DATA1; |
|
else |
|
datatoggle = TD_TOGGLE_DATA0; |
|
} |
|
} |
|
|
|
etd->urb = urb; |
|
etd->ep = urb_priv->ep; |
|
etd->len = count; |
|
|
|
if (usb_pipeint(pipe)) { |
|
interval = urb->interval; |
|
relpolpos = (readl(imx21->regs + USBH_FRMNUB) + 1) & 0xff; |
|
} |
|
|
|
/* Write ETD to device memory */ |
|
setup_etd_dword0(imx21, etd_num, urb, dir, maxpacket); |
|
|
|
etd_writel(imx21, etd_num, 2, |
|
(u32) interval << DW2_POLINTERV | |
|
((u32) relpolpos << DW2_RELPOLPOS) | |
|
((u32) dir << DW2_DIRPID) | |
|
((u32) bufround << DW2_BUFROUND) | |
|
((u32) datatoggle << DW2_DATATOG) | |
|
((u32) TD_NOTACCESSED << DW2_COMPCODE)); |
|
|
|
/* DMA will always transfer buffer size even if TOBYCNT in DWORD3 |
|
is smaller. Make sure we don't overrun the buffer! |
|
*/ |
|
if (count && count < maxpacket) |
|
etd_buf_size = count; |
|
else |
|
etd_buf_size = maxpacket; |
|
|
|
etd_writel(imx21, etd_num, 3, |
|
((u32) (etd_buf_size - 1) << DW3_BUFSIZE) | (u32) count); |
|
|
|
if (!count) |
|
etd->dma_handle = 0; |
|
|
|
/* allocate x and y buffer space at once */ |
|
etd->dmem_size = (count > maxpacket) ? maxpacket * 2 : maxpacket; |
|
etd->dmem_offset = alloc_dmem(imx21, etd->dmem_size, urb_priv->ep); |
|
if (etd->dmem_offset < 0) { |
|
/* Setup everything we can in HW and update when we get DMEM */ |
|
etd_writel(imx21, etd_num, 1, (u32)maxpacket << 16); |
|
|
|
dev_dbg(imx21->dev, "Queuing etd %d for DMEM\n", etd_num); |
|
debug_urb_queued_for_dmem(imx21, urb); |
|
list_add_tail(&etd->queue, &imx21->queue_for_dmem); |
|
return; |
|
} |
|
|
|
etd_writel(imx21, etd_num, 1, |
|
(((u32) etd->dmem_offset + (u32) maxpacket) << DW1_YBUFSRTAD) | |
|
(u32) etd->dmem_offset); |
|
|
|
urb_priv->active = 1; |
|
|
|
/* enable the ETD to kick off transfer */ |
|
dev_vdbg(imx21->dev, "Activating etd %d for %d bytes %s\n", |
|
etd_num, count, dir != TD_DIR_IN ? "out" : "in"); |
|
activate_etd(imx21, etd_num, dir); |
|
|
|
} |
|
|
|
static void nonisoc_etd_done(struct usb_hcd *hcd, int etd_num) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
struct etd_priv *etd = &imx21->etd[etd_num]; |
|
struct urb *urb = etd->urb; |
|
u32 etd_mask = 1 << etd_num; |
|
struct urb_priv *urb_priv = urb->hcpriv; |
|
int dir; |
|
int cc; |
|
u32 bytes_xfrd; |
|
int etd_done; |
|
|
|
disactivate_etd(imx21, etd_num); |
|
|
|
dir = (etd_readl(imx21, etd_num, 0) >> DW0_DIRECT) & 0x3; |
|
cc = (etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE) & 0xf; |
|
bytes_xfrd = etd->len - (etd_readl(imx21, etd_num, 3) & 0x1fffff); |
|
|
|
/* save toggle carry */ |
|
usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), |
|
usb_pipeout(urb->pipe), |
|
(etd_readl(imx21, etd_num, 0) >> DW0_TOGCRY) & 0x1); |
|
|
|
if (dir == TD_DIR_IN) { |
|
clear_toggle_bit(imx21, USBH_XFILLSTAT, etd_mask); |
|
clear_toggle_bit(imx21, USBH_YFILLSTAT, etd_mask); |
|
|
|
if (etd->bounce_buffer) { |
|
memcpy(etd->cpu_buffer, etd->bounce_buffer, bytes_xfrd); |
|
dma_unmap_single(imx21->dev, |
|
etd->dma_handle, etd->len, DMA_FROM_DEVICE); |
|
} else if (!etd->dma_handle && bytes_xfrd) {/* PIO */ |
|
memcpy_fromio(etd->cpu_buffer, |
|
imx21->regs + USBOTG_DMEM + etd->dmem_offset, |
|
bytes_xfrd); |
|
} |
|
} |
|
|
|
kfree(etd->bounce_buffer); |
|
etd->bounce_buffer = NULL; |
|
free_dmem(imx21, etd); |
|
|
|
urb->error_count = 0; |
|
if (!(urb->transfer_flags & URB_SHORT_NOT_OK) |
|
&& (cc == TD_DATAUNDERRUN)) |
|
cc = TD_CC_NOERROR; |
|
|
|
if (cc != 0) |
|
dev_vdbg(imx21->dev, "cc is 0x%x\n", cc); |
|
|
|
etd_done = (cc_to_error[cc] != 0); /* stop if error */ |
|
|
|
switch (usb_pipetype(urb->pipe)) { |
|
case PIPE_CONTROL: |
|
switch (urb_priv->state) { |
|
case US_CTRL_SETUP: |
|
if (urb->transfer_buffer_length > 0) |
|
urb_priv->state = US_CTRL_DATA; |
|
else |
|
urb_priv->state = US_CTRL_ACK; |
|
break; |
|
case US_CTRL_DATA: |
|
urb->actual_length += bytes_xfrd; |
|
urb_priv->state = US_CTRL_ACK; |
|
break; |
|
case US_CTRL_ACK: |
|
etd_done = 1; |
|
break; |
|
default: |
|
dev_err(imx21->dev, |
|
"Invalid pipe state %d\n", urb_priv->state); |
|
etd_done = 1; |
|
break; |
|
} |
|
break; |
|
|
|
case PIPE_BULK: |
|
urb->actual_length += bytes_xfrd; |
|
if ((urb_priv->state == US_BULK) |
|
&& (urb->transfer_flags & URB_ZERO_PACKET) |
|
&& urb->transfer_buffer_length > 0 |
|
&& ((urb->transfer_buffer_length % |
|
usb_maxpacket(urb->dev, urb->pipe, |
|
usb_pipeout(urb->pipe))) == 0)) { |
|
/* need a 0-packet */ |
|
urb_priv->state = US_BULK0; |
|
} else { |
|
etd_done = 1; |
|
} |
|
break; |
|
|
|
case PIPE_INTERRUPT: |
|
urb->actual_length += bytes_xfrd; |
|
etd_done = 1; |
|
break; |
|
} |
|
|
|
if (etd_done) |
|
nonisoc_urb_completed_for_etd(imx21, etd, cc_to_error[cc]); |
|
else { |
|
dev_vdbg(imx21->dev, "next state=%d\n", urb_priv->state); |
|
schedule_nonisoc_etd(imx21, urb); |
|
} |
|
} |
|
|
|
|
|
static struct ep_priv *alloc_ep(void) |
|
{ |
|
int i; |
|
struct ep_priv *ep_priv; |
|
|
|
ep_priv = kzalloc(sizeof(struct ep_priv), GFP_ATOMIC); |
|
if (!ep_priv) |
|
return NULL; |
|
|
|
for (i = 0; i < NUM_ISO_ETDS; ++i) |
|
ep_priv->etd[i] = -1; |
|
|
|
return ep_priv; |
|
} |
|
|
|
static int imx21_hc_urb_enqueue(struct usb_hcd *hcd, |
|
struct urb *urb, gfp_t mem_flags) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
struct usb_host_endpoint *ep = urb->ep; |
|
struct urb_priv *urb_priv; |
|
struct ep_priv *ep_priv; |
|
struct etd_priv *etd; |
|
int ret; |
|
unsigned long flags; |
|
|
|
dev_vdbg(imx21->dev, |
|
"enqueue urb=%p ep=%p len=%d " |
|
"buffer=%p dma=%pad setupBuf=%p setupDma=%pad\n", |
|
urb, ep, |
|
urb->transfer_buffer_length, |
|
urb->transfer_buffer, &urb->transfer_dma, |
|
urb->setup_packet, &urb->setup_dma); |
|
|
|
if (usb_pipeisoc(urb->pipe)) |
|
return imx21_hc_urb_enqueue_isoc(hcd, ep, urb, mem_flags); |
|
|
|
urb_priv = kzalloc(sizeof(struct urb_priv), mem_flags); |
|
if (!urb_priv) |
|
return -ENOMEM; |
|
|
|
spin_lock_irqsave(&imx21->lock, flags); |
|
|
|
ep_priv = ep->hcpriv; |
|
if (ep_priv == NULL) { |
|
ep_priv = alloc_ep(); |
|
if (!ep_priv) { |
|
ret = -ENOMEM; |
|
goto failed_alloc_ep; |
|
} |
|
ep->hcpriv = ep_priv; |
|
ep_priv->ep = ep; |
|
} |
|
|
|
ret = usb_hcd_link_urb_to_ep(hcd, urb); |
|
if (ret) |
|
goto failed_link; |
|
|
|
urb->status = -EINPROGRESS; |
|
urb->actual_length = 0; |
|
urb->error_count = 0; |
|
urb->hcpriv = urb_priv; |
|
urb_priv->ep = ep; |
|
|
|
switch (usb_pipetype(urb->pipe)) { |
|
case PIPE_CONTROL: |
|
urb_priv->state = US_CTRL_SETUP; |
|
break; |
|
case PIPE_BULK: |
|
urb_priv->state = US_BULK; |
|
break; |
|
} |
|
|
|
debug_urb_submitted(imx21, urb); |
|
if (ep_priv->etd[0] < 0) { |
|
if (ep_priv->waiting_etd) { |
|
dev_dbg(imx21->dev, |
|
"no ETD available already queued %p\n", |
|
ep_priv); |
|
debug_urb_queued_for_etd(imx21, urb); |
|
goto out; |
|
} |
|
ep_priv->etd[0] = alloc_etd(imx21); |
|
if (ep_priv->etd[0] < 0) { |
|
dev_dbg(imx21->dev, |
|
"no ETD available queueing %p\n", ep_priv); |
|
debug_urb_queued_for_etd(imx21, urb); |
|
list_add_tail(&ep_priv->queue, &imx21->queue_for_etd); |
|
ep_priv->waiting_etd = 1; |
|
goto out; |
|
} |
|
} |
|
|
|
/* Schedule if no URB already active for this endpoint */ |
|
etd = &imx21->etd[ep_priv->etd[0]]; |
|
if (etd->urb == NULL) { |
|
DEBUG_LOG_FRAME(imx21, etd, last_req); |
|
schedule_nonisoc_etd(imx21, urb); |
|
} |
|
|
|
out: |
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
return 0; |
|
|
|
failed_link: |
|
failed_alloc_ep: |
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
kfree(urb_priv); |
|
return ret; |
|
} |
|
|
|
static int imx21_hc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, |
|
int status) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
unsigned long flags; |
|
struct usb_host_endpoint *ep; |
|
struct ep_priv *ep_priv; |
|
struct urb_priv *urb_priv = urb->hcpriv; |
|
int ret = -EINVAL; |
|
|
|
dev_vdbg(imx21->dev, "dequeue urb=%p iso=%d status=%d\n", |
|
urb, usb_pipeisoc(urb->pipe), status); |
|
|
|
spin_lock_irqsave(&imx21->lock, flags); |
|
|
|
ret = usb_hcd_check_unlink_urb(hcd, urb, status); |
|
if (ret) |
|
goto fail; |
|
ep = urb_priv->ep; |
|
ep_priv = ep->hcpriv; |
|
|
|
debug_urb_unlinked(imx21, urb); |
|
|
|
if (usb_pipeisoc(urb->pipe)) { |
|
dequeue_isoc_urb(imx21, urb, ep_priv); |
|
schedule_isoc_etds(hcd, ep); |
|
} else if (urb_priv->active) { |
|
int etd_num = ep_priv->etd[0]; |
|
if (etd_num != -1) { |
|
struct etd_priv *etd = &imx21->etd[etd_num]; |
|
|
|
disactivate_etd(imx21, etd_num); |
|
free_dmem(imx21, etd); |
|
etd->urb = NULL; |
|
kfree(etd->bounce_buffer); |
|
etd->bounce_buffer = NULL; |
|
} |
|
} |
|
|
|
urb_done(hcd, urb, status); |
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
return 0; |
|
|
|
fail: |
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
return ret; |
|
} |
|
|
|
/* =========================================== */ |
|
/* Interrupt dispatch */ |
|
/* =========================================== */ |
|
|
|
static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof) |
|
{ |
|
int etd_num; |
|
int enable_sof_int = 0; |
|
unsigned long flags; |
|
|
|
spin_lock_irqsave(&imx21->lock, flags); |
|
|
|
for (etd_num = 0; etd_num < USB_NUM_ETD; etd_num++) { |
|
u32 etd_mask = 1 << etd_num; |
|
u32 enabled = readl(imx21->regs + USBH_ETDENSET) & etd_mask; |
|
u32 done = readl(imx21->regs + USBH_ETDDONESTAT) & etd_mask; |
|
struct etd_priv *etd = &imx21->etd[etd_num]; |
|
|
|
|
|
if (done) { |
|
DEBUG_LOG_FRAME(imx21, etd, last_int); |
|
} else { |
|
/* |
|
* Kludge warning! |
|
* |
|
* When multiple transfers are using the bus we sometimes get into a state |
|
* where the transfer has completed (the CC field of the ETD is != 0x0F), |
|
* the ETD has self disabled but the ETDDONESTAT flag is not set |
|
* (and hence no interrupt occurs). |
|
* This causes the transfer in question to hang. |
|
* The kludge below checks for this condition at each SOF and processes any |
|
* blocked ETDs (after an arbitrary 10 frame wait) |
|
* |
|
* With a single active transfer the usbtest test suite will run for days |
|
* without the kludge. |
|
* With other bus activity (eg mass storage) even just test1 will hang without |
|
* the kludge. |
|
*/ |
|
u32 dword0; |
|
int cc; |
|
|
|
if (etd->active_count && !enabled) /* suspicious... */ |
|
enable_sof_int = 1; |
|
|
|
if (!sof || enabled || !etd->active_count) |
|
continue; |
|
|
|
cc = etd_readl(imx21, etd_num, 2) >> DW2_COMPCODE; |
|
if (cc == TD_NOTACCESSED) |
|
continue; |
|
|
|
if (++etd->active_count < 10) |
|
continue; |
|
|
|
dword0 = etd_readl(imx21, etd_num, 0); |
|
dev_dbg(imx21->dev, |
|
"unblock ETD %d dev=0x%X ep=0x%X cc=0x%02X!\n", |
|
etd_num, dword0 & 0x7F, |
|
(dword0 >> DW0_ENDPNT) & 0x0F, |
|
cc); |
|
|
|
#ifdef DEBUG |
|
dev_dbg(imx21->dev, |
|
"frame: act=%d disact=%d" |
|
" int=%d req=%d cur=%d\n", |
|
etd->activated_frame, |
|
etd->disactivated_frame, |
|
etd->last_int_frame, |
|
etd->last_req_frame, |
|
readl(imx21->regs + USBH_FRMNUB)); |
|
imx21->debug_unblocks++; |
|
#endif |
|
etd->active_count = 0; |
|
/* End of kludge */ |
|
} |
|
|
|
if (etd->ep == NULL || etd->urb == NULL) { |
|
dev_dbg(imx21->dev, |
|
"Interrupt for unexpected etd %d" |
|
" ep=%p urb=%p\n", |
|
etd_num, etd->ep, etd->urb); |
|
disactivate_etd(imx21, etd_num); |
|
continue; |
|
} |
|
|
|
if (usb_pipeisoc(etd->urb->pipe)) |
|
isoc_etd_done(hcd, etd_num); |
|
else |
|
nonisoc_etd_done(hcd, etd_num); |
|
} |
|
|
|
/* only enable SOF interrupt if it may be needed for the kludge */ |
|
if (enable_sof_int) |
|
set_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT); |
|
else |
|
clear_register_bits(imx21, USBH_SYSIEN, USBH_SYSIEN_SOFINT); |
|
|
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
} |
|
|
|
static irqreturn_t imx21_irq(struct usb_hcd *hcd) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
u32 ints = readl(imx21->regs + USBH_SYSISR); |
|
|
|
if (ints & USBH_SYSIEN_HERRINT) |
|
dev_dbg(imx21->dev, "Scheduling error\n"); |
|
|
|
if (ints & USBH_SYSIEN_SORINT) |
|
dev_dbg(imx21->dev, "Scheduling overrun\n"); |
|
|
|
if (ints & (USBH_SYSISR_DONEINT | USBH_SYSISR_SOFINT)) |
|
process_etds(hcd, imx21, ints & USBH_SYSISR_SOFINT); |
|
|
|
writel(ints, imx21->regs + USBH_SYSISR); |
|
return IRQ_HANDLED; |
|
} |
|
|
|
static void imx21_hc_endpoint_disable(struct usb_hcd *hcd, |
|
struct usb_host_endpoint *ep) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
unsigned long flags; |
|
struct ep_priv *ep_priv; |
|
int i; |
|
|
|
if (ep == NULL) |
|
return; |
|
|
|
spin_lock_irqsave(&imx21->lock, flags); |
|
ep_priv = ep->hcpriv; |
|
dev_vdbg(imx21->dev, "disable ep=%p, ep->hcpriv=%p\n", ep, ep_priv); |
|
|
|
if (!list_empty(&ep->urb_list)) |
|
dev_dbg(imx21->dev, "ep's URB list is not empty\n"); |
|
|
|
if (ep_priv != NULL) { |
|
for (i = 0; i < NUM_ISO_ETDS; i++) { |
|
if (ep_priv->etd[i] > -1) |
|
dev_dbg(imx21->dev, "free etd %d for disable\n", |
|
ep_priv->etd[i]); |
|
|
|
free_etd(imx21, ep_priv->etd[i]); |
|
} |
|
kfree(ep_priv); |
|
ep->hcpriv = NULL; |
|
} |
|
|
|
for (i = 0; i < USB_NUM_ETD; i++) { |
|
if (imx21->etd[i].alloc && imx21->etd[i].ep == ep) { |
|
dev_err(imx21->dev, |
|
"Active etd %d for disabled ep=%p!\n", i, ep); |
|
free_etd(imx21, i); |
|
} |
|
} |
|
free_epdmem(imx21, ep); |
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
} |
|
|
|
/* =========================================== */ |
|
/* Hub handling */ |
|
/* =========================================== */ |
|
|
|
static int get_hub_descriptor(struct usb_hcd *hcd, |
|
struct usb_hub_descriptor *desc) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
desc->bDescriptorType = USB_DT_HUB; /* HUB descriptor */ |
|
desc->bHubContrCurrent = 0; |
|
|
|
desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA) |
|
& USBH_ROOTHUBA_NDNSTMPRT_MASK; |
|
desc->bDescLength = 9; |
|
desc->bPwrOn2PwrGood = 0; |
|
desc->wHubCharacteristics = (__force __u16) cpu_to_le16( |
|
HUB_CHAR_NO_LPSM | /* No power switching */ |
|
HUB_CHAR_NO_OCPM); /* No over current protection */ |
|
|
|
desc->u.hs.DeviceRemovable[0] = 1 << 1; |
|
desc->u.hs.DeviceRemovable[1] = ~0; |
|
return 0; |
|
} |
|
|
|
static int imx21_hc_hub_status_data(struct usb_hcd *hcd, char *buf) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
int ports; |
|
int changed = 0; |
|
int i; |
|
unsigned long flags; |
|
|
|
spin_lock_irqsave(&imx21->lock, flags); |
|
ports = readl(imx21->regs + USBH_ROOTHUBA) |
|
& USBH_ROOTHUBA_NDNSTMPRT_MASK; |
|
if (ports > 7) { |
|
ports = 7; |
|
dev_err(imx21->dev, "ports %d > 7\n", ports); |
|
} |
|
for (i = 0; i < ports; i++) { |
|
if (readl(imx21->regs + USBH_PORTSTAT(i)) & |
|
(USBH_PORTSTAT_CONNECTSC | |
|
USBH_PORTSTAT_PRTENBLSC | |
|
USBH_PORTSTAT_PRTSTATSC | |
|
USBH_PORTSTAT_OVRCURIC | |
|
USBH_PORTSTAT_PRTRSTSC)) { |
|
|
|
changed = 1; |
|
buf[0] |= 1 << (i + 1); |
|
} |
|
} |
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
|
|
if (changed) |
|
dev_info(imx21->dev, "Hub status changed\n"); |
|
return changed; |
|
} |
|
|
|
static int imx21_hc_hub_control(struct usb_hcd *hcd, |
|
u16 typeReq, |
|
u16 wValue, u16 wIndex, char *buf, u16 wLength) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
int rc = 0; |
|
u32 status_write = 0; |
|
|
|
switch (typeReq) { |
|
case ClearHubFeature: |
|
dev_dbg(imx21->dev, "ClearHubFeature\n"); |
|
switch (wValue) { |
|
case C_HUB_OVER_CURRENT: |
|
dev_dbg(imx21->dev, " OVER_CURRENT\n"); |
|
break; |
|
case C_HUB_LOCAL_POWER: |
|
dev_dbg(imx21->dev, " LOCAL_POWER\n"); |
|
break; |
|
default: |
|
dev_dbg(imx21->dev, " unknown\n"); |
|
rc = -EINVAL; |
|
break; |
|
} |
|
break; |
|
|
|
case ClearPortFeature: |
|
dev_dbg(imx21->dev, "ClearPortFeature\n"); |
|
switch (wValue) { |
|
case USB_PORT_FEAT_ENABLE: |
|
dev_dbg(imx21->dev, " ENABLE\n"); |
|
status_write = USBH_PORTSTAT_CURCONST; |
|
break; |
|
case USB_PORT_FEAT_SUSPEND: |
|
dev_dbg(imx21->dev, " SUSPEND\n"); |
|
status_write = USBH_PORTSTAT_PRTOVRCURI; |
|
break; |
|
case USB_PORT_FEAT_POWER: |
|
dev_dbg(imx21->dev, " POWER\n"); |
|
status_write = USBH_PORTSTAT_LSDEVCON; |
|
break; |
|
case USB_PORT_FEAT_C_ENABLE: |
|
dev_dbg(imx21->dev, " C_ENABLE\n"); |
|
status_write = USBH_PORTSTAT_PRTENBLSC; |
|
break; |
|
case USB_PORT_FEAT_C_SUSPEND: |
|
dev_dbg(imx21->dev, " C_SUSPEND\n"); |
|
status_write = USBH_PORTSTAT_PRTSTATSC; |
|
break; |
|
case USB_PORT_FEAT_C_CONNECTION: |
|
dev_dbg(imx21->dev, " C_CONNECTION\n"); |
|
status_write = USBH_PORTSTAT_CONNECTSC; |
|
break; |
|
case USB_PORT_FEAT_C_OVER_CURRENT: |
|
dev_dbg(imx21->dev, " C_OVER_CURRENT\n"); |
|
status_write = USBH_PORTSTAT_OVRCURIC; |
|
break; |
|
case USB_PORT_FEAT_C_RESET: |
|
dev_dbg(imx21->dev, " C_RESET\n"); |
|
status_write = USBH_PORTSTAT_PRTRSTSC; |
|
break; |
|
default: |
|
dev_dbg(imx21->dev, " unknown\n"); |
|
rc = -EINVAL; |
|
break; |
|
} |
|
|
|
break; |
|
|
|
case GetHubDescriptor: |
|
dev_dbg(imx21->dev, "GetHubDescriptor\n"); |
|
rc = get_hub_descriptor(hcd, (void *)buf); |
|
break; |
|
|
|
case GetHubStatus: |
|
dev_dbg(imx21->dev, " GetHubStatus\n"); |
|
*(__le32 *) buf = 0; |
|
break; |
|
|
|
case GetPortStatus: |
|
dev_dbg(imx21->dev, "GetPortStatus: port: %d, 0x%x\n", |
|
wIndex, USBH_PORTSTAT(wIndex - 1)); |
|
*(__le32 *) buf = readl(imx21->regs + |
|
USBH_PORTSTAT(wIndex - 1)); |
|
break; |
|
|
|
case SetHubFeature: |
|
dev_dbg(imx21->dev, "SetHubFeature\n"); |
|
switch (wValue) { |
|
case C_HUB_OVER_CURRENT: |
|
dev_dbg(imx21->dev, " OVER_CURRENT\n"); |
|
break; |
|
|
|
case C_HUB_LOCAL_POWER: |
|
dev_dbg(imx21->dev, " LOCAL_POWER\n"); |
|
break; |
|
default: |
|
dev_dbg(imx21->dev, " unknown\n"); |
|
rc = -EINVAL; |
|
break; |
|
} |
|
|
|
break; |
|
|
|
case SetPortFeature: |
|
dev_dbg(imx21->dev, "SetPortFeature\n"); |
|
switch (wValue) { |
|
case USB_PORT_FEAT_SUSPEND: |
|
dev_dbg(imx21->dev, " SUSPEND\n"); |
|
status_write = USBH_PORTSTAT_PRTSUSPST; |
|
break; |
|
case USB_PORT_FEAT_POWER: |
|
dev_dbg(imx21->dev, " POWER\n"); |
|
status_write = USBH_PORTSTAT_PRTPWRST; |
|
break; |
|
case USB_PORT_FEAT_RESET: |
|
dev_dbg(imx21->dev, " RESET\n"); |
|
status_write = USBH_PORTSTAT_PRTRSTST; |
|
break; |
|
default: |
|
dev_dbg(imx21->dev, " unknown\n"); |
|
rc = -EINVAL; |
|
break; |
|
} |
|
break; |
|
|
|
default: |
|
dev_dbg(imx21->dev, " unknown\n"); |
|
rc = -EINVAL; |
|
break; |
|
} |
|
|
|
if (status_write) |
|
writel(status_write, imx21->regs + USBH_PORTSTAT(wIndex - 1)); |
|
return rc; |
|
} |
|
|
|
/* =========================================== */ |
|
/* Host controller management */ |
|
/* =========================================== */ |
|
|
|
static int imx21_hc_reset(struct usb_hcd *hcd) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
unsigned long timeout; |
|
unsigned long flags; |
|
|
|
spin_lock_irqsave(&imx21->lock, flags); |
|
|
|
/* Reset the Host controller modules */ |
|
writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH | |
|
USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC, |
|
imx21->regs + USBOTG_RST_CTRL); |
|
|
|
/* Wait for reset to finish */ |
|
timeout = jiffies + HZ; |
|
while (readl(imx21->regs + USBOTG_RST_CTRL) != 0) { |
|
if (time_after(jiffies, timeout)) { |
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
dev_err(imx21->dev, "timeout waiting for reset\n"); |
|
return -ETIMEDOUT; |
|
} |
|
spin_unlock_irq(&imx21->lock); |
|
schedule_timeout_uninterruptible(1); |
|
spin_lock_irq(&imx21->lock); |
|
} |
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
return 0; |
|
} |
|
|
|
static int imx21_hc_start(struct usb_hcd *hcd) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
unsigned long flags; |
|
int i, j; |
|
u32 hw_mode = USBOTG_HWMODE_CRECFG_HOST; |
|
u32 usb_control = 0; |
|
|
|
hw_mode |= ((imx21->pdata->host_xcvr << USBOTG_HWMODE_HOSTXCVR_SHIFT) & |
|
USBOTG_HWMODE_HOSTXCVR_MASK); |
|
hw_mode |= ((imx21->pdata->otg_xcvr << USBOTG_HWMODE_OTGXCVR_SHIFT) & |
|
USBOTG_HWMODE_OTGXCVR_MASK); |
|
|
|
if (imx21->pdata->host1_txenoe) |
|
usb_control |= USBCTRL_HOST1_TXEN_OE; |
|
|
|
if (!imx21->pdata->host1_xcverless) |
|
usb_control |= USBCTRL_HOST1_BYP_TLL; |
|
|
|
if (imx21->pdata->otg_ext_xcvr) |
|
usb_control |= USBCTRL_OTC_RCV_RXDP; |
|
|
|
|
|
spin_lock_irqsave(&imx21->lock, flags); |
|
|
|
writel((USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN), |
|
imx21->regs + USBOTG_CLK_CTRL); |
|
writel(hw_mode, imx21->regs + USBOTG_HWMODE); |
|
writel(usb_control, imx21->regs + USBCTRL); |
|
writel(USB_MISCCONTROL_SKPRTRY | USB_MISCCONTROL_ARBMODE, |
|
imx21->regs + USB_MISCCONTROL); |
|
|
|
/* Clear the ETDs */ |
|
for (i = 0; i < USB_NUM_ETD; i++) |
|
for (j = 0; j < 4; j++) |
|
etd_writel(imx21, i, j, 0); |
|
|
|
/* Take the HC out of reset */ |
|
writel(USBH_HOST_CTRL_HCUSBSTE_OPERATIONAL | USBH_HOST_CTRL_CTLBLKSR_1, |
|
imx21->regs + USBH_HOST_CTRL); |
|
|
|
/* Enable ports */ |
|
if (imx21->pdata->enable_otg_host) |
|
writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, |
|
imx21->regs + USBH_PORTSTAT(0)); |
|
|
|
if (imx21->pdata->enable_host1) |
|
writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, |
|
imx21->regs + USBH_PORTSTAT(1)); |
|
|
|
if (imx21->pdata->enable_host2) |
|
writel(USBH_PORTSTAT_PRTPWRST | USBH_PORTSTAT_PRTENABST, |
|
imx21->regs + USBH_PORTSTAT(2)); |
|
|
|
|
|
hcd->state = HC_STATE_RUNNING; |
|
|
|
/* Enable host controller interrupts */ |
|
set_register_bits(imx21, USBH_SYSIEN, |
|
USBH_SYSIEN_HERRINT | |
|
USBH_SYSIEN_DONEINT | USBH_SYSIEN_SORINT); |
|
set_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT); |
|
|
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
|
|
return 0; |
|
} |
|
|
|
static void imx21_hc_stop(struct usb_hcd *hcd) |
|
{ |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
unsigned long flags; |
|
|
|
spin_lock_irqsave(&imx21->lock, flags); |
|
|
|
writel(0, imx21->regs + USBH_SYSIEN); |
|
clear_register_bits(imx21, USBOTG_CINT_STEN, USBOTG_HCINT); |
|
clear_register_bits(imx21, USBOTG_CLK_CTRL_HST | USBOTG_CLK_CTRL_MAIN, |
|
USBOTG_CLK_CTRL); |
|
spin_unlock_irqrestore(&imx21->lock, flags); |
|
} |
|
|
|
/* =========================================== */ |
|
/* Driver glue */ |
|
/* =========================================== */ |
|
|
|
static struct hc_driver imx21_hc_driver = { |
|
.description = hcd_name, |
|
.product_desc = "IMX21 USB Host Controller", |
|
.hcd_priv_size = sizeof(struct imx21), |
|
|
|
.flags = HCD_USB11, |
|
.irq = imx21_irq, |
|
|
|
.reset = imx21_hc_reset, |
|
.start = imx21_hc_start, |
|
.stop = imx21_hc_stop, |
|
|
|
/* I/O requests */ |
|
.urb_enqueue = imx21_hc_urb_enqueue, |
|
.urb_dequeue = imx21_hc_urb_dequeue, |
|
.endpoint_disable = imx21_hc_endpoint_disable, |
|
|
|
/* scheduling support */ |
|
.get_frame_number = imx21_hc_get_frame, |
|
|
|
/* Root hub support */ |
|
.hub_status_data = imx21_hc_hub_status_data, |
|
.hub_control = imx21_hc_hub_control, |
|
|
|
}; |
|
|
|
static struct mx21_usbh_platform_data default_pdata = { |
|
.host_xcvr = MX21_USBXCVR_TXDIF_RXDIF, |
|
.otg_xcvr = MX21_USBXCVR_TXDIF_RXDIF, |
|
.enable_host1 = 1, |
|
.enable_host2 = 1, |
|
.enable_otg_host = 1, |
|
|
|
}; |
|
|
|
static int imx21_remove(struct platform_device *pdev) |
|
{ |
|
struct usb_hcd *hcd = platform_get_drvdata(pdev); |
|
struct imx21 *imx21 = hcd_to_imx21(hcd); |
|
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
|
|
|
remove_debug_files(imx21); |
|
usb_remove_hcd(hcd); |
|
|
|
if (res != NULL) { |
|
clk_disable_unprepare(imx21->clk); |
|
clk_put(imx21->clk); |
|
iounmap(imx21->regs); |
|
release_mem_region(res->start, resource_size(res)); |
|
} |
|
|
|
kfree(hcd); |
|
return 0; |
|
} |
|
|
|
|
|
static int imx21_probe(struct platform_device *pdev) |
|
{ |
|
struct usb_hcd *hcd; |
|
struct imx21 *imx21; |
|
struct resource *res; |
|
int ret; |
|
int irq; |
|
|
|
printk(KERN_INFO "%s\n", imx21_hc_driver.product_desc); |
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
|
if (!res) |
|
return -ENODEV; |
|
irq = platform_get_irq(pdev, 0); |
|
if (irq < 0) |
|
return -ENXIO; |
|
|
|
hcd = usb_create_hcd(&imx21_hc_driver, |
|
&pdev->dev, dev_name(&pdev->dev)); |
|
if (hcd == NULL) { |
|
dev_err(&pdev->dev, "Cannot create hcd (%s)\n", |
|
dev_name(&pdev->dev)); |
|
return -ENOMEM; |
|
} |
|
|
|
imx21 = hcd_to_imx21(hcd); |
|
imx21->hcd = hcd; |
|
imx21->dev = &pdev->dev; |
|
imx21->pdata = dev_get_platdata(&pdev->dev); |
|
if (!imx21->pdata) |
|
imx21->pdata = &default_pdata; |
|
|
|
spin_lock_init(&imx21->lock); |
|
INIT_LIST_HEAD(&imx21->dmem_list); |
|
INIT_LIST_HEAD(&imx21->queue_for_etd); |
|
INIT_LIST_HEAD(&imx21->queue_for_dmem); |
|
create_debug_files(imx21); |
|
|
|
res = request_mem_region(res->start, resource_size(res), hcd_name); |
|
if (!res) { |
|
ret = -EBUSY; |
|
goto failed_request_mem; |
|
} |
|
|
|
imx21->regs = ioremap(res->start, resource_size(res)); |
|
if (imx21->regs == NULL) { |
|
dev_err(imx21->dev, "Cannot map registers\n"); |
|
ret = -ENOMEM; |
|
goto failed_ioremap; |
|
} |
|
|
|
/* Enable clocks source */ |
|
imx21->clk = clk_get(imx21->dev, NULL); |
|
if (IS_ERR(imx21->clk)) { |
|
dev_err(imx21->dev, "no clock found\n"); |
|
ret = PTR_ERR(imx21->clk); |
|
goto failed_clock_get; |
|
} |
|
|
|
ret = clk_set_rate(imx21->clk, clk_round_rate(imx21->clk, 48000000)); |
|
if (ret) |
|
goto failed_clock_set; |
|
ret = clk_prepare_enable(imx21->clk); |
|
if (ret) |
|
goto failed_clock_enable; |
|
|
|
dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n", |
|
(readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF); |
|
|
|
ret = usb_add_hcd(hcd, irq, 0); |
|
if (ret != 0) { |
|
dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret); |
|
goto failed_add_hcd; |
|
} |
|
device_wakeup_enable(hcd->self.controller); |
|
|
|
return 0; |
|
|
|
failed_add_hcd: |
|
clk_disable_unprepare(imx21->clk); |
|
failed_clock_enable: |
|
failed_clock_set: |
|
clk_put(imx21->clk); |
|
failed_clock_get: |
|
iounmap(imx21->regs); |
|
failed_ioremap: |
|
release_mem_region(res->start, resource_size(res)); |
|
failed_request_mem: |
|
remove_debug_files(imx21); |
|
usb_put_hcd(hcd); |
|
return ret; |
|
} |
|
|
|
static struct platform_driver imx21_hcd_driver = { |
|
.driver = { |
|
.name = hcd_name, |
|
}, |
|
.probe = imx21_probe, |
|
.remove = imx21_remove, |
|
.suspend = NULL, |
|
.resume = NULL, |
|
}; |
|
|
|
module_platform_driver(imx21_hcd_driver); |
|
|
|
MODULE_DESCRIPTION("i.MX21 USB Host controller"); |
|
MODULE_AUTHOR("Martin Fuzzey"); |
|
MODULE_LICENSE("GPL"); |
|
MODULE_ALIAS("platform:imx21-hcd");
|
|
|