You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
797 lines
18 KiB
797 lines
18 KiB
/* |
|
* Watchdog Timer Driver |
|
* for ITE IT87xx Environment Control - Low Pin Count Input / Output |
|
* |
|
* (c) Copyright 2007 Oliver Schuster <olivers137@aol.com> |
|
* |
|
* Based on softdog.c by Alan Cox, |
|
* 83977f_wdt.c by Jose Goncalves, |
|
* it87.c by Chris Gauthron, Jean Delvare |
|
* |
|
* Data-sheets: Publicly available at the ITE website |
|
* http://www.ite.com.tw/ |
|
* |
|
* Support of the watchdog timers, which are available on |
|
* IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, |
|
* IT8728 and IT8783. |
|
* |
|
* This program is free software; you can redistribute it and/or |
|
* modify it under the terms of the GNU General Public License |
|
* as published by the Free Software Foundation; either version |
|
* 2 of the License, or (at your option) any later version. |
|
* |
|
* This program is distributed in the hope that it will be useful, |
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|
* GNU General Public License for more details. |
|
* |
|
* You should have received a copy of the GNU General Public License |
|
* along with this program; if not, write to the Free Software |
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
|
*/ |
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
|
|
|
#include <linux/module.h> |
|
#include <linux/moduleparam.h> |
|
#include <linux/types.h> |
|
#include <linux/kernel.h> |
|
#include <linux/fs.h> |
|
#include <linux/miscdevice.h> |
|
#include <linux/init.h> |
|
#include <linux/ioport.h> |
|
#include <linux/watchdog.h> |
|
#include <linux/notifier.h> |
|
#include <linux/reboot.h> |
|
#include <linux/uaccess.h> |
|
#include <linux/io.h> |
|
|
|
|
|
#define WATCHDOG_VERSION "1.14" |
|
#define WATCHDOG_NAME "IT87 WDT" |
|
#define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" |
|
#define WD_MAGIC 'V' |
|
|
|
/* Defaults for Module Parameter */ |
|
#define DEFAULT_NOGAMEPORT 0 |
|
#define DEFAULT_NOCIR 0 |
|
#define DEFAULT_EXCLUSIVE 1 |
|
#define DEFAULT_TIMEOUT 60 |
|
#define DEFAULT_TESTMODE 0 |
|
#define DEFAULT_NOWAYOUT WATCHDOG_NOWAYOUT |
|
|
|
/* IO Ports */ |
|
#define REG 0x2e |
|
#define VAL 0x2f |
|
|
|
/* Logical device Numbers LDN */ |
|
#define GPIO 0x07 |
|
#define GAMEPORT 0x09 |
|
#define CIR 0x0a |
|
|
|
/* Configuration Registers and Functions */ |
|
#define LDNREG 0x07 |
|
#define CHIPID 0x20 |
|
#define CHIPREV 0x22 |
|
#define ACTREG 0x30 |
|
#define BASEREG 0x60 |
|
|
|
/* Chip Id numbers */ |
|
#define NO_DEV_ID 0xffff |
|
#define IT8702_ID 0x8702 |
|
#define IT8705_ID 0x8705 |
|
#define IT8712_ID 0x8712 |
|
#define IT8716_ID 0x8716 |
|
#define IT8718_ID 0x8718 |
|
#define IT8720_ID 0x8720 |
|
#define IT8721_ID 0x8721 |
|
#define IT8726_ID 0x8726 /* the data sheet suggest wrongly 0x8716 */ |
|
#define IT8728_ID 0x8728 |
|
#define IT8783_ID 0x8783 |
|
|
|
/* GPIO Configuration Registers LDN=0x07 */ |
|
#define WDTCTRL 0x71 |
|
#define WDTCFG 0x72 |
|
#define WDTVALLSB 0x73 |
|
#define WDTVALMSB 0x74 |
|
|
|
/* GPIO Bits WDTCTRL */ |
|
#define WDT_CIRINT 0x80 |
|
#define WDT_MOUSEINT 0x40 |
|
#define WDT_KYBINT 0x20 |
|
#define WDT_GAMEPORT 0x10 /* not in it8718, it8720, it8721, it8728 */ |
|
#define WDT_FORCE 0x02 |
|
#define WDT_ZERO 0x01 |
|
|
|
/* GPIO Bits WDTCFG */ |
|
#define WDT_TOV1 0x80 |
|
#define WDT_KRST 0x40 |
|
#define WDT_TOVE 0x20 |
|
#define WDT_PWROK 0x10 /* not in it8721 */ |
|
#define WDT_INT_MASK 0x0f |
|
|
|
/* CIR Configuration Register LDN=0x0a */ |
|
#define CIR_ILS 0x70 |
|
|
|
/* The default Base address is not always available, we use this */ |
|
#define CIR_BASE 0x0208 |
|
|
|
/* CIR Controller */ |
|
#define CIR_DR(b) (b) |
|
#define CIR_IER(b) (b + 1) |
|
#define CIR_RCR(b) (b + 2) |
|
#define CIR_TCR1(b) (b + 3) |
|
#define CIR_TCR2(b) (b + 4) |
|
#define CIR_TSR(b) (b + 5) |
|
#define CIR_RSR(b) (b + 6) |
|
#define CIR_BDLR(b) (b + 5) |
|
#define CIR_BDHR(b) (b + 6) |
|
#define CIR_IIR(b) (b + 7) |
|
|
|
/* Default Base address of Game port */ |
|
#define GP_BASE_DEFAULT 0x0201 |
|
|
|
/* wdt_status */ |
|
#define WDTS_TIMER_RUN 0 |
|
#define WDTS_DEV_OPEN 1 |
|
#define WDTS_KEEPALIVE 2 |
|
#define WDTS_LOCKED 3 |
|
#define WDTS_USE_GP 4 |
|
#define WDTS_EXPECTED 5 |
|
#define WDTS_USE_CIR 6 |
|
|
|
static unsigned int base, gpact, ciract, max_units, chip_type; |
|
static unsigned long wdt_status; |
|
|
|
static int nogameport = DEFAULT_NOGAMEPORT; |
|
static int nocir = DEFAULT_NOCIR; |
|
static int exclusive = DEFAULT_EXCLUSIVE; |
|
static int timeout = DEFAULT_TIMEOUT; |
|
static int testmode = DEFAULT_TESTMODE; |
|
static bool nowayout = DEFAULT_NOWAYOUT; |
|
|
|
module_param(nogameport, int, 0); |
|
MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default=" |
|
__MODULE_STRING(DEFAULT_NOGAMEPORT)); |
|
module_param(nocir, int, 0); |
|
MODULE_PARM_DESC(nocir, "Forbid the use of Consumer IR interrupts to reset timer, default=" |
|
__MODULE_STRING(DEFAULT_NOCIR)); |
|
module_param(exclusive, int, 0); |
|
MODULE_PARM_DESC(exclusive, "Watchdog exclusive device open, default=" |
|
__MODULE_STRING(DEFAULT_EXCLUSIVE)); |
|
module_param(timeout, int, 0); |
|
MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default=" |
|
__MODULE_STRING(DEFAULT_TIMEOUT)); |
|
module_param(testmode, int, 0); |
|
MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default=" |
|
__MODULE_STRING(DEFAULT_TESTMODE)); |
|
module_param(nowayout, bool, 0); |
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default=" |
|
__MODULE_STRING(WATCHDOG_NOWAYOUT)); |
|
|
|
/* Superio Chip */ |
|
|
|
static inline int superio_enter(void) |
|
{ |
|
/* |
|
* Try to reserve REG and REG + 1 for exclusive access. |
|
*/ |
|
if (!request_muxed_region(REG, 2, WATCHDOG_NAME)) |
|
return -EBUSY; |
|
|
|
outb(0x87, REG); |
|
outb(0x01, REG); |
|
outb(0x55, REG); |
|
outb(0x55, REG); |
|
return 0; |
|
} |
|
|
|
static inline void superio_exit(void) |
|
{ |
|
outb(0x02, REG); |
|
outb(0x02, VAL); |
|
release_region(REG, 2); |
|
} |
|
|
|
static inline void superio_select(int ldn) |
|
{ |
|
outb(LDNREG, REG); |
|
outb(ldn, VAL); |
|
} |
|
|
|
static inline int superio_inb(int reg) |
|
{ |
|
outb(reg, REG); |
|
return inb(VAL); |
|
} |
|
|
|
static inline void superio_outb(int val, int reg) |
|
{ |
|
outb(reg, REG); |
|
outb(val, VAL); |
|
} |
|
|
|
static inline int superio_inw(int reg) |
|
{ |
|
int val; |
|
outb(reg++, REG); |
|
val = inb(VAL) << 8; |
|
outb(reg, REG); |
|
val |= inb(VAL); |
|
return val; |
|
} |
|
|
|
static inline void superio_outw(int val, int reg) |
|
{ |
|
outb(reg++, REG); |
|
outb(val >> 8, VAL); |
|
outb(reg, REG); |
|
outb(val, VAL); |
|
} |
|
|
|
/* Internal function, should be called after superio_select(GPIO) */ |
|
static void wdt_update_timeout(void) |
|
{ |
|
unsigned char cfg = WDT_KRST; |
|
int tm = timeout; |
|
|
|
if (testmode) |
|
cfg = 0; |
|
|
|
if (tm <= max_units) |
|
cfg |= WDT_TOV1; |
|
else |
|
tm /= 60; |
|
|
|
if (chip_type != IT8721_ID) |
|
cfg |= WDT_PWROK; |
|
|
|
superio_outb(cfg, WDTCFG); |
|
superio_outb(tm, WDTVALLSB); |
|
if (max_units > 255) |
|
superio_outb(tm>>8, WDTVALMSB); |
|
} |
|
|
|
static int wdt_round_time(int t) |
|
{ |
|
t += 59; |
|
t -= t % 60; |
|
return t; |
|
} |
|
|
|
/* watchdog timer handling */ |
|
|
|
static void wdt_keepalive(void) |
|
{ |
|
if (test_bit(WDTS_USE_GP, &wdt_status)) |
|
inb(base); |
|
else if (test_bit(WDTS_USE_CIR, &wdt_status)) |
|
/* The timer reloads with around 5 msec delay */ |
|
outb(0x55, CIR_DR(base)); |
|
else { |
|
if (superio_enter()) |
|
return; |
|
|
|
superio_select(GPIO); |
|
wdt_update_timeout(); |
|
superio_exit(); |
|
} |
|
set_bit(WDTS_KEEPALIVE, &wdt_status); |
|
} |
|
|
|
static int wdt_start(void) |
|
{ |
|
int ret = superio_enter(); |
|
if (ret) |
|
return ret; |
|
|
|
superio_select(GPIO); |
|
if (test_bit(WDTS_USE_GP, &wdt_status)) |
|
superio_outb(WDT_GAMEPORT, WDTCTRL); |
|
else if (test_bit(WDTS_USE_CIR, &wdt_status)) |
|
superio_outb(WDT_CIRINT, WDTCTRL); |
|
wdt_update_timeout(); |
|
|
|
superio_exit(); |
|
|
|
return 0; |
|
} |
|
|
|
static int wdt_stop(void) |
|
{ |
|
int ret = superio_enter(); |
|
if (ret) |
|
return ret; |
|
|
|
superio_select(GPIO); |
|
superio_outb(0x00, WDTCTRL); |
|
superio_outb(WDT_TOV1, WDTCFG); |
|
superio_outb(0x00, WDTVALLSB); |
|
if (max_units > 255) |
|
superio_outb(0x00, WDTVALMSB); |
|
|
|
superio_exit(); |
|
return 0; |
|
} |
|
|
|
/** |
|
* wdt_set_timeout - set a new timeout value with watchdog ioctl |
|
* @t: timeout value in seconds |
|
* |
|
* The hardware device has a 8 or 16 bit watchdog timer (depends on |
|
* chip version) that can be configured to count seconds or minutes. |
|
* |
|
* Used within WDIOC_SETTIMEOUT watchdog device ioctl. |
|
*/ |
|
|
|
static int wdt_set_timeout(int t) |
|
{ |
|
if (t < 1 || t > max_units * 60) |
|
return -EINVAL; |
|
|
|
if (t > max_units) |
|
timeout = wdt_round_time(t); |
|
else |
|
timeout = t; |
|
|
|
if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { |
|
int ret = superio_enter(); |
|
if (ret) |
|
return ret; |
|
|
|
superio_select(GPIO); |
|
wdt_update_timeout(); |
|
superio_exit(); |
|
} |
|
return 0; |
|
} |
|
|
|
/** |
|
* wdt_get_status - determines the status supported by watchdog ioctl |
|
* @status: status returned to user space |
|
* |
|
* The status bit of the device does not allow to distinguish |
|
* between a regular system reset and a watchdog forced reset. |
|
* But, in test mode it is useful, so it is supported through |
|
* WDIOC_GETSTATUS watchdog ioctl. Additionally the driver |
|
* reports the keepalive signal and the acception of the magic. |
|
* |
|
* Used within WDIOC_GETSTATUS watchdog device ioctl. |
|
*/ |
|
|
|
static int wdt_get_status(int *status) |
|
{ |
|
*status = 0; |
|
if (testmode) { |
|
int ret = superio_enter(); |
|
if (ret) |
|
return ret; |
|
|
|
superio_select(GPIO); |
|
if (superio_inb(WDTCTRL) & WDT_ZERO) { |
|
superio_outb(0x00, WDTCTRL); |
|
clear_bit(WDTS_TIMER_RUN, &wdt_status); |
|
*status |= WDIOF_CARDRESET; |
|
} |
|
|
|
superio_exit(); |
|
} |
|
if (test_and_clear_bit(WDTS_KEEPALIVE, &wdt_status)) |
|
*status |= WDIOF_KEEPALIVEPING; |
|
if (test_bit(WDTS_EXPECTED, &wdt_status)) |
|
*status |= WDIOF_MAGICCLOSE; |
|
return 0; |
|
} |
|
|
|
/* /dev/watchdog handling */ |
|
|
|
/** |
|
* wdt_open - watchdog file_operations .open |
|
* @inode: inode of the device |
|
* @file: file handle to the device |
|
* |
|
* The watchdog timer starts by opening the device. |
|
* |
|
* Used within the file operation of the watchdog device. |
|
*/ |
|
|
|
static int wdt_open(struct inode *inode, struct file *file) |
|
{ |
|
if (exclusive && test_and_set_bit(WDTS_DEV_OPEN, &wdt_status)) |
|
return -EBUSY; |
|
if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { |
|
int ret; |
|
if (nowayout && !test_and_set_bit(WDTS_LOCKED, &wdt_status)) |
|
__module_get(THIS_MODULE); |
|
|
|
ret = wdt_start(); |
|
if (ret) { |
|
clear_bit(WDTS_LOCKED, &wdt_status); |
|
clear_bit(WDTS_TIMER_RUN, &wdt_status); |
|
clear_bit(WDTS_DEV_OPEN, &wdt_status); |
|
return ret; |
|
} |
|
} |
|
return nonseekable_open(inode, file); |
|
} |
|
|
|
/** |
|
* wdt_release - watchdog file_operations .release |
|
* @inode: inode of the device |
|
* @file: file handle to the device |
|
* |
|
* Closing the watchdog device either stops the watchdog timer |
|
* or in the case, that nowayout is set or the magic character |
|
* wasn't written, a critical warning about an running watchdog |
|
* timer is given. |
|
* |
|
* Used within the file operation of the watchdog device. |
|
*/ |
|
|
|
static int wdt_release(struct inode *inode, struct file *file) |
|
{ |
|
if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { |
|
if (test_and_clear_bit(WDTS_EXPECTED, &wdt_status)) { |
|
int ret = wdt_stop(); |
|
if (ret) { |
|
/* |
|
* Stop failed. Just keep the watchdog alive |
|
* and hope nothing bad happens. |
|
*/ |
|
set_bit(WDTS_EXPECTED, &wdt_status); |
|
wdt_keepalive(); |
|
return ret; |
|
} |
|
clear_bit(WDTS_TIMER_RUN, &wdt_status); |
|
} else { |
|
wdt_keepalive(); |
|
pr_crit("unexpected close, not stopping watchdog!\n"); |
|
} |
|
} |
|
clear_bit(WDTS_DEV_OPEN, &wdt_status); |
|
return 0; |
|
} |
|
|
|
/** |
|
* wdt_write - watchdog file_operations .write |
|
* @file: file handle to the watchdog |
|
* @buf: buffer to write |
|
* @count: count of bytes |
|
* @ppos: pointer to the position to write. No seeks allowed |
|
* |
|
* A write to a watchdog device is defined as a keepalive signal. Any |
|
* write of data will do, as we don't define content meaning. |
|
* |
|
* Used within the file operation of the watchdog device. |
|
*/ |
|
|
|
static ssize_t wdt_write(struct file *file, const char __user *buf, |
|
size_t count, loff_t *ppos) |
|
{ |
|
if (count) { |
|
clear_bit(WDTS_EXPECTED, &wdt_status); |
|
wdt_keepalive(); |
|
} |
|
if (!nowayout) { |
|
size_t ofs; |
|
|
|
/* note: just in case someone wrote the magic character long ago */ |
|
for (ofs = 0; ofs != count; ofs++) { |
|
char c; |
|
if (get_user(c, buf + ofs)) |
|
return -EFAULT; |
|
if (c == WD_MAGIC) |
|
set_bit(WDTS_EXPECTED, &wdt_status); |
|
} |
|
} |
|
return count; |
|
} |
|
|
|
static const struct watchdog_info ident = { |
|
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, |
|
.firmware_version = 1, |
|
.identity = WATCHDOG_NAME, |
|
}; |
|
|
|
/** |
|
* wdt_ioctl - watchdog file_operations .unlocked_ioctl |
|
* @file: file handle to the device |
|
* @cmd: watchdog command |
|
* @arg: argument pointer |
|
* |
|
* The watchdog API defines a common set of functions for all watchdogs |
|
* according to their available features. |
|
* |
|
* Used within the file operation of the watchdog device. |
|
*/ |
|
|
|
static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
|
{ |
|
int rc = 0, status, new_options, new_timeout; |
|
union { |
|
struct watchdog_info __user *ident; |
|
int __user *i; |
|
} uarg; |
|
|
|
uarg.i = (int __user *)arg; |
|
|
|
switch (cmd) { |
|
case WDIOC_GETSUPPORT: |
|
return copy_to_user(uarg.ident, |
|
&ident, sizeof(ident)) ? -EFAULT : 0; |
|
|
|
case WDIOC_GETSTATUS: |
|
rc = wdt_get_status(&status); |
|
if (rc) |
|
return rc; |
|
return put_user(status, uarg.i); |
|
|
|
case WDIOC_GETBOOTSTATUS: |
|
return put_user(0, uarg.i); |
|
|
|
case WDIOC_KEEPALIVE: |
|
wdt_keepalive(); |
|
return 0; |
|
|
|
case WDIOC_SETOPTIONS: |
|
if (get_user(new_options, uarg.i)) |
|
return -EFAULT; |
|
|
|
switch (new_options) { |
|
case WDIOS_DISABLECARD: |
|
if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { |
|
rc = wdt_stop(); |
|
if (rc) |
|
return rc; |
|
} |
|
clear_bit(WDTS_TIMER_RUN, &wdt_status); |
|
return 0; |
|
|
|
case WDIOS_ENABLECARD: |
|
if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { |
|
rc = wdt_start(); |
|
if (rc) { |
|
clear_bit(WDTS_TIMER_RUN, &wdt_status); |
|
return rc; |
|
} |
|
} |
|
return 0; |
|
|
|
default: |
|
return -EFAULT; |
|
} |
|
|
|
case WDIOC_SETTIMEOUT: |
|
if (get_user(new_timeout, uarg.i)) |
|
return -EFAULT; |
|
rc = wdt_set_timeout(new_timeout); |
|
case WDIOC_GETTIMEOUT: |
|
if (put_user(timeout, uarg.i)) |
|
return -EFAULT; |
|
return rc; |
|
|
|
default: |
|
return -ENOTTY; |
|
} |
|
} |
|
|
|
static int wdt_notify_sys(struct notifier_block *this, unsigned long code, |
|
void *unused) |
|
{ |
|
if (code == SYS_DOWN || code == SYS_HALT) |
|
wdt_stop(); |
|
return NOTIFY_DONE; |
|
} |
|
|
|
static const struct file_operations wdt_fops = { |
|
.owner = THIS_MODULE, |
|
.llseek = no_llseek, |
|
.write = wdt_write, |
|
.unlocked_ioctl = wdt_ioctl, |
|
.open = wdt_open, |
|
.release = wdt_release, |
|
}; |
|
|
|
static struct miscdevice wdt_miscdev = { |
|
.minor = WATCHDOG_MINOR, |
|
.name = "watchdog", |
|
.fops = &wdt_fops, |
|
}; |
|
|
|
static struct notifier_block wdt_notifier = { |
|
.notifier_call = wdt_notify_sys, |
|
}; |
|
|
|
static int __init it87_wdt_init(void) |
|
{ |
|
int rc = 0; |
|
int try_gameport = !nogameport; |
|
u8 chip_rev; |
|
int gp_rreq_fail = 0; |
|
|
|
wdt_status = 0; |
|
|
|
rc = superio_enter(); |
|
if (rc) |
|
return rc; |
|
|
|
chip_type = superio_inw(CHIPID); |
|
chip_rev = superio_inb(CHIPREV) & 0x0f; |
|
superio_exit(); |
|
|
|
switch (chip_type) { |
|
case IT8702_ID: |
|
max_units = 255; |
|
break; |
|
case IT8712_ID: |
|
max_units = (chip_rev < 8) ? 255 : 65535; |
|
break; |
|
case IT8716_ID: |
|
case IT8726_ID: |
|
max_units = 65535; |
|
break; |
|
case IT8718_ID: |
|
case IT8720_ID: |
|
case IT8721_ID: |
|
case IT8728_ID: |
|
case IT8783_ID: |
|
max_units = 65535; |
|
try_gameport = 0; |
|
break; |
|
case IT8705_ID: |
|
pr_err("Unsupported Chip found, Chip %04x Revision %02x\n", |
|
chip_type, chip_rev); |
|
return -ENODEV; |
|
case NO_DEV_ID: |
|
pr_err("no device\n"); |
|
return -ENODEV; |
|
default: |
|
pr_err("Unknown Chip found, Chip %04x Revision %04x\n", |
|
chip_type, chip_rev); |
|
return -ENODEV; |
|
} |
|
|
|
rc = superio_enter(); |
|
if (rc) |
|
return rc; |
|
|
|
superio_select(GPIO); |
|
superio_outb(WDT_TOV1, WDTCFG); |
|
superio_outb(0x00, WDTCTRL); |
|
|
|
/* First try to get Gameport support */ |
|
if (try_gameport) { |
|
superio_select(GAMEPORT); |
|
base = superio_inw(BASEREG); |
|
if (!base) { |
|
base = GP_BASE_DEFAULT; |
|
superio_outw(base, BASEREG); |
|
} |
|
gpact = superio_inb(ACTREG); |
|
superio_outb(0x01, ACTREG); |
|
if (request_region(base, 1, WATCHDOG_NAME)) |
|
set_bit(WDTS_USE_GP, &wdt_status); |
|
else |
|
gp_rreq_fail = 1; |
|
} |
|
|
|
/* If we haven't Gameport support, try to get CIR support */ |
|
if (!nocir && !test_bit(WDTS_USE_GP, &wdt_status)) { |
|
if (!request_region(CIR_BASE, 8, WATCHDOG_NAME)) { |
|
if (gp_rreq_fail) |
|
pr_err("I/O Address 0x%04x and 0x%04x already in use\n", |
|
base, CIR_BASE); |
|
else |
|
pr_err("I/O Address 0x%04x already in use\n", |
|
CIR_BASE); |
|
rc = -EIO; |
|
goto err_out; |
|
} |
|
base = CIR_BASE; |
|
|
|
superio_select(CIR); |
|
superio_outw(base, BASEREG); |
|
superio_outb(0x00, CIR_ILS); |
|
ciract = superio_inb(ACTREG); |
|
superio_outb(0x01, ACTREG); |
|
if (gp_rreq_fail) { |
|
superio_select(GAMEPORT); |
|
superio_outb(gpact, ACTREG); |
|
} |
|
set_bit(WDTS_USE_CIR, &wdt_status); |
|
} |
|
|
|
if (timeout < 1 || timeout > max_units * 60) { |
|
timeout = DEFAULT_TIMEOUT; |
|
pr_warn("Timeout value out of range, use default %d sec\n", |
|
DEFAULT_TIMEOUT); |
|
} |
|
|
|
if (timeout > max_units) |
|
timeout = wdt_round_time(timeout); |
|
|
|
rc = register_reboot_notifier(&wdt_notifier); |
|
if (rc) { |
|
pr_err("Cannot register reboot notifier (err=%d)\n", rc); |
|
goto err_out_region; |
|
} |
|
|
|
rc = misc_register(&wdt_miscdev); |
|
if (rc) { |
|
pr_err("Cannot register miscdev on minor=%d (err=%d)\n", |
|
wdt_miscdev.minor, rc); |
|
goto err_out_reboot; |
|
} |
|
|
|
/* Initialize CIR to use it as keepalive source */ |
|
if (test_bit(WDTS_USE_CIR, &wdt_status)) { |
|
outb(0x00, CIR_RCR(base)); |
|
outb(0xc0, CIR_TCR1(base)); |
|
outb(0x5c, CIR_TCR2(base)); |
|
outb(0x10, CIR_IER(base)); |
|
outb(0x00, CIR_BDHR(base)); |
|
outb(0x01, CIR_BDLR(base)); |
|
outb(0x09, CIR_IER(base)); |
|
} |
|
|
|
pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d exclusive=%d nogameport=%d nocir=%d)\n", |
|
chip_type, chip_rev, timeout, |
|
nowayout, testmode, exclusive, nogameport, nocir); |
|
|
|
superio_exit(); |
|
return 0; |
|
|
|
err_out_reboot: |
|
unregister_reboot_notifier(&wdt_notifier); |
|
err_out_region: |
|
if (test_bit(WDTS_USE_GP, &wdt_status)) |
|
release_region(base, 1); |
|
else if (test_bit(WDTS_USE_CIR, &wdt_status)) { |
|
release_region(base, 8); |
|
superio_select(CIR); |
|
superio_outb(ciract, ACTREG); |
|
} |
|
err_out: |
|
if (try_gameport) { |
|
superio_select(GAMEPORT); |
|
superio_outb(gpact, ACTREG); |
|
} |
|
|
|
superio_exit(); |
|
return rc; |
|
} |
|
|
|
static void __exit it87_wdt_exit(void) |
|
{ |
|
if (superio_enter() == 0) { |
|
superio_select(GPIO); |
|
superio_outb(0x00, WDTCTRL); |
|
superio_outb(0x00, WDTCFG); |
|
superio_outb(0x00, WDTVALLSB); |
|
if (max_units > 255) |
|
superio_outb(0x00, WDTVALMSB); |
|
if (test_bit(WDTS_USE_GP, &wdt_status)) { |
|
superio_select(GAMEPORT); |
|
superio_outb(gpact, ACTREG); |
|
} else if (test_bit(WDTS_USE_CIR, &wdt_status)) { |
|
superio_select(CIR); |
|
superio_outb(ciract, ACTREG); |
|
} |
|
superio_exit(); |
|
} |
|
|
|
misc_deregister(&wdt_miscdev); |
|
unregister_reboot_notifier(&wdt_notifier); |
|
|
|
if (test_bit(WDTS_USE_GP, &wdt_status)) |
|
release_region(base, 1); |
|
else if (test_bit(WDTS_USE_CIR, &wdt_status)) |
|
release_region(base, 8); |
|
} |
|
|
|
module_init(it87_wdt_init); |
|
module_exit(it87_wdt_exit); |
|
|
|
MODULE_AUTHOR("Oliver Schuster"); |
|
MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O"); |
|
MODULE_LICENSE("GPL");
|
|
|