You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
71 lines
1.8 KiB
71 lines
1.8 KiB
#!/bin/bash |
|
# |
|
# Simple example: |
|
# * pktgen sending with single thread and single interface |
|
# * flow variation via random UDP source port |
|
# |
|
basedir=`dirname $0` |
|
source ${basedir}/functions.sh |
|
root_check_run_with_sudo "$@" |
|
|
|
# Parameter parsing via include |
|
# - go look in parameters.sh to see which setting are avail |
|
# - required param is the interface "-i" stored in $DEV |
|
source ${basedir}/parameters.sh |
|
# |
|
# Set some default params, if they didn't get set |
|
[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42" |
|
[ -z "$CLONE_SKB" ] && CLONE_SKB="0" |
|
# Example enforce param "-m" for dst_mac |
|
[ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac" |
|
|
|
# Base Config |
|
DELAY="0" # Zero means max speed |
|
COUNT="100000" # Zero means indefinitely |
|
|
|
# Flow variation random source port between min and max |
|
UDP_MIN=9 |
|
UDP_MAX=109 |
|
|
|
# General cleanup everything since last run |
|
# (especially important if other threads were configured by other scripts) |
|
pg_ctrl "reset" |
|
|
|
# Add remove all other devices and add_device $DEV to thread 0 |
|
thread=0 |
|
pg_thread $thread "rem_device_all" |
|
pg_thread $thread "add_device" $DEV |
|
|
|
# How many packets to send (zero means indefinitely) |
|
pg_set $DEV "count $COUNT" |
|
|
|
# Reduce alloc cost by sending same SKB many times |
|
# - this obviously affects the randomness within the packet |
|
pg_set $DEV "clone_skb $CLONE_SKB" |
|
|
|
# Set packet size |
|
pg_set $DEV "pkt_size $PKT_SIZE" |
|
|
|
# Delay between packets (zero means max speed) |
|
pg_set $DEV "delay $DELAY" |
|
|
|
# Flag example disabling timestamping |
|
pg_set $DEV "flag NO_TIMESTAMP" |
|
|
|
# Destination |
|
pg_set $DEV "dst_mac $DST_MAC" |
|
pg_set $DEV "dst $DEST_IP" |
|
|
|
# Setup random UDP port src range |
|
pg_set $DEV "flag UDPSRC_RND" |
|
pg_set $DEV "udp_src_min $UDP_MIN" |
|
pg_set $DEV "udp_src_max $UDP_MAX" |
|
|
|
# start_run |
|
echo "Running... ctrl^C to stop" >&2 |
|
pg_ctrl "start" |
|
echo "Done" >&2 |
|
|
|
# Print results |
|
echo "Result device: $DEV" |
|
cat /proc/net/pktgen/$DEV
|
|
|