PL286/hardware/interfaces/audio/2.0/IStream.hal

/*
 * Copyright (C) 2016 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.hardware.audio@2.0;

import android.hardware.audio.common@2.0;
import android.hardware.audio.effect@2.0::IEffect;

interface IStream {
    typedef android.hardware.audio@2.0::Result Result;

    /**
     * Return the frame size (number of bytes per sample).
     *
     * @return frameSize frame size in bytes.
     */
    getFrameSize() generates (uint64_t frameSize);

    /**
     * Return the frame count of the buffer. Calling this method is equivalent
     * to getting AUDIO_PARAMETER_STREAM_FRAME_COUNT on the legacy HAL.
     *
     * @return count frame count.
     */
    getFrameCount() generates (uint64_t count);

    /**
     * Return the size of input/output buffer in bytes for this stream.
     * It must be a multiple of the frame size.
     *
     * @return buffer buffer size in bytes.
     */
    getBufferSize() generates (uint64_t bufferSize);

    /**
     * Return the sampling rate in Hz.
     *
     * @return sampleRateHz sample rate in Hz.
     */
    getSampleRate() generates (uint32_t sampleRateHz);

    /**
     * Return supported sampling rates of the stream. Calling this method is
     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES on the
     * legacy HAL.
     *
     * @return sampleRateHz supported sample rates.
     */
    getSupportedSampleRates() generates (vec<uint32_t> sampleRates);

    /**
     * Sets the sampling rate of the stream. Calling this method is equivalent
     * to setting AUDIO_PARAMETER_STREAM_SAMPLING_RATE on the legacy HAL.
     *
     * @param sampleRateHz sample rate in Hz.
     * @return retval operation completion status.
     */
    setSampleRate(uint32_t sampleRateHz) generates (Result retval);

    /**
     * Return the channel mask of the stream.
     *
     * @return mask channel mask.
     */
    getChannelMask() generates (AudioChannelMask mask);

    /**
     * Return supported channel masks of the stream. Calling this method is
     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_CHANNELS on the legacy
     * HAL.
     *
     * @return masks supported audio masks.
     */
    getSupportedChannelMasks() generates (vec<AudioChannelMask> masks);

    /**
     * Sets the channel mask of the stream. Calling this method is equivalent to
     * setting AUDIO_PARAMETER_STREAM_CHANNELS on the legacy HAL.
     *
     * @param format audio format.
     * @return retval operation completion status.
     */
    setChannelMask(AudioChannelMask mask) generates (Result retval);

    /**
     * Return the audio format of the stream.
     *
     * @return format audio format.
     */
    getFormat() generates (AudioFormat format);

    /**
     * Return supported audio formats of the stream. Calling this method is
     * equivalent to getting AUDIO_PARAMETER_STREAM_SUP_FORMATS on the legacy
     * HAL.
     *
     * @return formats supported audio formats.
     */
    getSupportedFormats() generates (vec<AudioFormat> formats);

    /**
     * Sets the audio format of the stream. Calling this method is equivalent to
     * setting AUDIO_PARAMETER_STREAM_FORMAT on the legacy HAL.
     *
     * @param format audio format.
     * @return retval operation completion status.
     */
    setFormat(AudioFormat format) generates (Result retval);

    /**
     * Convenience method for retrieving several stream parameters in
     * one transaction.
     *
     * @return sampleRateHz sample rate in Hz.
     * @return mask channel mask.
     * @return format audio format.
     */
    getAudioProperties() generates (
            uint32_t sampleRateHz, AudioChannelMask mask, AudioFormat format);

    /**
     * Applies audio effect to the stream.
     *
     * @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
     *                 the effect to apply.
     * @return retval operation completion status.
     */
    addEffect(uint64_t effectId) generates (Result retval);

    /**
     * Stops application of the effect to the stream.
     *
     * @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
     *                 the effect to remove.
     * @return retval operation completion status.
     */
    removeEffect(uint64_t effectId) generates (Result retval);

    /**
     * Put the audio hardware input/output into standby mode.
     * Driver must exit from standby mode at the next I/O operation.
     *
     * @return retval operation completion status.
     */
    standby() generates (Result retval);

    /**
     * Return the set of device(s) which this stream is connected to.
     *
     * @return device set of device(s) which this stream is connected to.
     */
    getDevice() generates (AudioDevice device);

    /**
     * Connects the stream to the device.
     *
     * This method must only be used for HALs that do not support
     * 'IDevice.createAudioPatch' method. Calling this method is
     * equivalent to setting AUDIO_PARAMETER_STREAM_ROUTING in the legacy HAL
     * interface.
     *
     * @param address device to connect the stream to.
     * @return retval operation completion status.
     */
    setDevice(DeviceAddress address) generates (Result retval);

    /**
     * Notifies the stream about device connection state. Calling this method is
     * equivalent to setting AUDIO_PARAMETER_DEVICE_[DIS]CONNECT on the legacy
     * HAL.
     *
     * @param address audio device specification.
     * @param connected whether the device is connected.
     * @return retval operation completion status.
     */
    setConnectedState(DeviceAddress address, bool connected)
            generates (Result retval);

    /**
     * Sets the HW synchronization source. Calling this method is equivalent to
     * setting AUDIO_PARAMETER_STREAM_HW_AV_SYNC on the legacy HAL.
     *
     * @param hwAvSync HW synchronization source
     * @return retval operation completion status.
     */
    setHwAvSync(AudioHwSync hwAvSync) generates (Result retval);

    /**
     * Generic method for retrieving vendor-specific parameter values.
     * The framework does not interpret the parameters, they are passed
     * in an opaque manner between a vendor application and HAL.
     *
     * @param keys parameter keys.
     * @return retval operation completion status.
     * @return parameters parameter key value pairs.
     */
    getParameters(vec<string> keys)
            generates (Result retval, vec<ParameterValue> parameters);

    /**
     * Generic method for setting vendor-specific parameter values.
     * The framework does not interpret the parameters, they are passed
     * in an opaque manner between a vendor application and HAL.
     *
     * @param parameters parameter key value pairs.
     * @return retval operation completion status.
     */
    setParameters(vec<ParameterValue> parameters) generates (Result retval);

    /**
     * Dumps information about the stream into the provided file descriptor.
     * This is used for the dumpsys facility.
     *
     * @param fd dump file descriptor.
     */
    debugDump(handle fd);

    /**
     * Called by the framework to start a stream operating in mmap mode.
     * createMmapBuffer() must be called before calling start().
     * Function only implemented by streams operating in mmap mode.
     *
     * @return retval OK in case the success.
     *                NOT_SUPPORTED on non mmap mode streams
     *                INVALID_STATE if called out of sequence
     */
    start() generates (Result retval);

    /**
     * Called by the framework to stop a stream operating in mmap mode.
     * Function only implemented by streams operating in mmap mode.
     *
     * @return retval OK in case the succes.
     *                NOT_SUPPORTED on non mmap mode streams
     *                INVALID_STATE if called out of sequence
     */
    stop() generates (Result retval) ;

    /**
     * Called by the framework to retrieve information on the mmap buffer used for audio
     * samples transfer.
     * Function only implemented by streams operating in mmap mode.
     *
     * @param minSizeFrames minimum buffer size requested. The actual buffer
     *                     size returned in struct MmapBufferInfo can be larger.
     * @return retval OK in case the success.
     *                NOT_SUPPORTED on non mmap mode streams
     *                NOT_INITIALIZED in case of memory allocation error
     *                INVALID_ARGUMENTS if the requested buffer size is too large
     *                INVALID_STATE if called out of sequence
     * @return info    a MmapBufferInfo struct containing information on the MMMAP buffer created.
     */
    createMmapBuffer(int32_t minSizeFrames)
            generates (Result retval, MmapBufferInfo info);

    /**
     * Called by the framework to read current read/write position in the mmap buffer
     * with associated time stamp.
     * Function only implemented by streams operating in mmap mode.
     *
     * @return retval OK in case the success.
     *                NOT_SUPPORTED on non mmap mode streams
     *                INVALID_STATE if called out of sequence
     * @return position a MmapPosition struct containing current HW read/write position in frames
     *                  with associated time stamp.
     */
    getMmapPosition()
            generates (Result retval, MmapPosition position);

    /**
     * Called by the framework to deinitialize the stream and free up
     * all the currently allocated resources. It is recommended to close
     * the stream on the client side as soon as it is becomes unused.
     *
     * @return retval OK in case the success.
     *                NOT_SUPPORTED if called on IStream instead of input or
     *                              output stream interface.
     *                INVALID_STATE if the stream was already closed.
     */
    close() generates (Result retval);
};