sandy
/
PL286
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1 Commit
1 Branch
0 Tags
18 GiB
Tree: 99da0f2c72
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '99da0f2c72'
${ noResults }
PL286/hardware/interfaces/wifi/1.0/IWifiStaIface.hal

550 lines
21 KiB
Raw Blame History

/*
* Copyright 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.hardware.wifi@1.0;
import IWifiIface;
import IWifiStaIfaceEventCallback;
/**
* Interface used to represent a single STA iface.
*/
interface IWifiStaIface extends IWifiIface {
/**
* Mask of capabilities suported by this Iface.
*/
enum StaIfaceCapabilityMask : uint32_t {
/**
* If set indicates that the APF APIs are supported.
* APF (Android Packet Filter) is a BPF like packet filtering
* bytecode executed by the firmware.
*/
APF = 1 << 0,
/**
* If set indicates that the Background Scan APIs are supported.
* Background scan allow the host to send a number of buckets down to the
* firmware. Each bucket contains a set of channels, a period, and some
* parameters about how and when to report results.
*/
BACKGROUND_SCAN = 1 << 1,
/**
* If set indicates that the link layer stats APIs are supported.
*/
LINK_LAYER_STATS = 1 << 2,
/**
* If set indicates that the RSSI monitor APIs are supported.
*/
RSSI_MONITOR = 1 << 3,
/**
* If set indicates that the roaming API's are supported.
*/
CONTROL_ROAMING = 1 << 4,
/**
* If set indicates support for Probe IE white listing.
*/
PROBE_IE_WHITELIST = 1 << 5,
/**
* If set indicates support for MAC & Probe Sequence Number randomization.
*/
SCAN_RAND = 1 << 6,
/**
* Support for 5 GHz Band.
*/
STA_5G = 1 << 7,
/**
* Support for GAS/ANQP queries.
*/
HOTSPOT = 1 << 8,
/**
* Support for Preferred Network Offload.
*/
PNO = 1 << 9,
/**
* Support for Tunneled Direct Link Setup.
*/
TDLS = 1 << 10,
/**
* Support for Tunneled Direct Link Setup off channel.
*/
TDLS_OFFCHANNEL = 1 << 11,
/**
* Support for neighbour discovery offload.
*/
ND_OFFLOAD = 1 << 12,
/**
* Support for keep alive packet offload.
*/
KEEP_ALIVE = 1 << 13,
/**
* Support for tracking connection packets' fate.
*/
DEBUG_PACKET_FATE = 1 << 14
};
/**
* Requests notifications of significant events on this iface. Multiple calls
* to this must register multiple callbacks each of which must receive all
* events.
*
* @param callback An instance of the |IWifiStaIfaceEventCallback| HIDL interface
* object.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|
*/
registerEventCallback(IWifiStaIfaceEventCallback callback)
generates (WifiStatus status);
/**
* Get the capabilities supported by this STA iface.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
* @return capabilities Bitset of |StaIfaceCapabilityMask| values.
*/
getCapabilities()
generates (WifiStatus status,
bitfield<StaIfaceCapabilityMask> capabilities);
/**
* Used to query additional information about the chip's APF capabilities.
* Must fail if |StaIfaceCapabilityMask.APF| is not set.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
* @return capabilities Instance of |StaApfPacketFilterCapabilities|.
*/
getApfPacketFilterCapabilities()
generates (WifiStatus status, StaApfPacketFilterCapabilities capabilities);
/**
* Installs an APF program on this iface, replacing an existing
* program if present.
* Must fail if |StaIfaceCapabilityMask.APF| is not set.
*
* APF docs
* ==========================================================================
* APF functionality, instructions and bytecode/binary format is described in:
* http://android.googlesource.com/platform/hardware/google/apf/
* +/b75c9f3714cfae3dad3d976958e063150781437e/apf.h
*
* The interpreter API is described here:
* http://android.googlesource.com/platform/hardware/google/apf/+/
* b75c9f3714cfae3dad3d976958e063150781437e/apf_interpreter.h#32
*
* The assembler/generator API is described in javadocs here:
* http://android.googlesource.com/platform/frameworks/base/+/
* 4456f33a958a7f09e608399da83c4d12b2e7d191/services/net/java/android/net/
* apf/ApfGenerator.java
*
* Disassembler usage is described here:
* http://android.googlesource.com/platform/hardware/google/apf/+/
* b75c9f3714cfae3dad3d976958e063150781437e/apf_disassembler.c#65
*
* The BPF to APF translator usage is described here:
* http://android.googlesource.com/platform/frameworks/base/+/
* 4456f33a958a7f09e608399da83c4d12b2e7d191/tests/net/java/android/net/
* apf/Bpf2Apf.java
* ==========================================================================
*
* @param cmdId command Id to use for this invocation.
* @param APF Program to be set.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_INVALID_ARGS|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
installApfPacketFilter(CommandId cmdId, vec<uint8_t> program)
generates (WifiStatus status);
/**
* Used to query additional information about the chip's Background Scan capabilities.
* Must fail if |StaIfaceCapabilityMask.BACKGROUND_SCAN| is not set.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
* @return capabilities Instance of |StaBackgroundScanCapabilities|.
*/
getBackgroundScanCapabilities()
generates (WifiStatus status, StaBackgroundScanCapabilities capabilities);
/**
* Used to query the list of valid frequencies (depending on country code set)
* for the provided band. These channels may be specifed in the
* |BackgroundScanBucketParameters.frequenciesInMhz| for a background scan
* request.
*
* @param band Band for which the frequency list is being generated.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
* @return frequencies vector of valid frequencies for the provided band.
*/
getValidFrequenciesForBand(WifiBand band)
generates (WifiStatus status, vec<WifiChannelInMhz> frequencies);
/**
* Start a background scan using the given cmdId as an identifier. Only one
* active background scan need be supported.
* Must fail if |StaIfaceCapabilityMask.BACKGROUND_SCAN| is not set.
*
* When this is called all requested buckets must be scanned, starting the
* beginning of the cycle.
*
* For example:
* If there are two buckets specified
* - Bucket 1: period=10s
* - Bucket 2: period=20s
* - Bucket 3: period=30s
* Then the following scans must occur
* - t=0 buckets 1, 2, and 3 are scanned
* - t=10 bucket 1 is scanned
* - t=20 bucket 1 and 2 are scanned
* - t=30 bucket 1 and 3 are scanned
* - t=40 bucket 1 and 2 are scanned
* - t=50 bucket 1 is scanned
* - t=60 buckets 1, 2, and 3 are scanned
* - and the patter repeats
*
* If any scan does not occur or is incomplete (error, interrupted, etc) then
* a cached scan result must still be recorded with the
* WIFI_SCAN_FLAG_INTERRUPTED flag set.
*
* @param cmdId command Id to use for this invocation.
* @params Background scan parameters.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_INVALID_ARGS|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
startBackgroundScan(CommandId cmdId, StaBackgroundScanParameters params)
generates (WifiStatus status);
/**
* Stop the background scan started.
* Must fail if |StaIfaceCapabilityMask.BACKGROUND_SCAN| is not set.
*
* @param cmdId command Id corresponding to the request.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_STARTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
stopBackgroundScan(CommandId cmdId) generates (WifiStatus status);
/**
* Enable link layer stats collection.
* Must fail if |StaIfaceCapabilityMask.LINK_LAYER_STATS| is not set.
*
* Radio statistics (once started) must not stop until disabled.
* Iface statistics (once started) reset and start afresh after each
* connection until disabled.
*
* @param debug Set for field debug mode. Driver must collect all
* statistics regardless of performance impact.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
enableLinkLayerStatsCollection(bool debug)
generates (WifiStatus status);
/**
* Disable link layer stats collection.
* Must fail if |StaIfaceCapabilityMask.LINK_LAYER_STATS| is not set.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_STARTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
disableLinkLayerStatsCollection() generates (WifiStatus status);
/**
* Retrieve the latest link layer stats.
* Must fail if |StaIfaceCapabilityMask.LINK_LAYER_STATS| is not set or if
* link layer stats collection hasn't been explicitly enabled.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_STARTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
* @return stats Instance of |LinkLayerStats|.
*/
getLinkLayerStats() generates (WifiStatus status, StaLinkLayerStats stats);
/**
* Start RSSI monitoring on the currently connected access point.
* Once the monitoring is enabled,
* |IWifiStaIfaceEventCallback.onRssiThresholdBreached| callback must be
* invoked to indicate if the RSSI goes above |maxRssi| or below |minRssi|.
* Must fail if |StaIfaceCapabilityMask.RSSI_MONITOR| is not set.
*
* @param cmdId command Id to use for this invocation.
* @param maxRssi Maximum RSSI threshold.
* @param minRssi Minimum RSSI threshold.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_ARGS_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
startRssiMonitoring(CommandId cmdId, Rssi maxRssi, Rssi minRssi)
generates (WifiStatus status);
/**
* Stop RSSI monitoring.
* Must fail if |StaIfaceCapabilityMask.RSSI_MONITOR| is not set.
*
* @param cmdId command Id corresponding to the request.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_STARTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
stopRssiMonitoring(CommandId cmdId) generates (WifiStatus status);
/**
* Get roaming control capabilities.
* Must fail if |StaIfaceCapabilityMask.CONTROL_ROAMING| is not set.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_UNKNOWN|
* @return caps Instance of |StaRoamingCapabilities|.
*/
getRoamingCapabilities()
generates (WifiStatus status, StaRoamingCapabilities caps);
/**
* Configure roaming control parameters.
* Must fail if |StaIfaceCapabilityMask.CONTROL_ROAMING| is not set.
*
* @param config Instance of |StaRoamingConfig|.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
configureRoaming(StaRoamingConfig config) generates (WifiStatus status);
/**
* Set the roaming control state with the parameters configured
* using |configureRoaming|. Depending on the roaming state set, the
* driver/firmware would enable/disable control over roaming decisions.
* Must fail if |StaIfaceCapabilityMask.CONTROL_ROAMING| is not set.
*
* @param state State of the roaming control.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_BUSY|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
setRoamingState(StaRoamingState state) generates (WifiStatus status);
/**
* Enable/Disable Neighbour discovery offload functionality in the firmware.
*
* @param enable true to enable, false to disable.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
enableNdOffload(bool enable) generates (WifiStatus status);
/**
* Start sending the specified keep alive packets periodically.
*
* @param cmdId command Id to use for this invocation.
* @param ipPacketData IP packet contents to be transmitted.
* @param etherType 16 bit ether type to be set in the ethernet frame
* transmitted.
* @param srcAddress Source MAC address of the packet.
* @param dstAddress Destination MAC address of the packet.
* @param periodInMs Interval at which this packet must be transmitted.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
startSendingKeepAlivePackets(
CommandId cmdId, vec<uint8_t> ipPacketData, uint16_t etherType,
MacAddress srcAddress, MacAddress dstAddress, uint32_t periodInMs)
generates (WifiStatus status);
/**
* Stop sending the specified keep alive packets.
*
* @param cmdId command Id corresponding to the request.
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
stopSendingKeepAlivePackets(CommandId cmdId) generates (WifiStatus status);
/**
* Set the MAC OUI during scanning.
* An OUI {Organizationally Unique Identifier} is a 24-bit number that
* uniquely identifies a vendor or manufacturer.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
setScanningMacOui(uint8_t[3] oui) generates (WifiStatus status);
/**
* API to start packet fate monitoring.
* - Once started, monitoring must remain active until HAL is stopped or the
* chip is reconfigured.
* - When HAL is unloaded, all packet fate buffers must be cleared.
* - The packet fates are used to monitor the state of packets transmitted/
* received during association.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
*/
startDebugPacketFateMonitoring() generates (WifiStatus status);
/**
* API to retrieve fates of outbound packets.
* - HAL implementation must return the fates of
* all the frames transmitted for the most recent association.
* The fate reports must follow the same order as their respective
* packets.
* - HAL implementation may choose (but is not required) to include
* reports for management frames.
* - Packets reported by firmware, but not recognized by driver,
* must be included. However, the ordering of the corresponding
* reports is at the discretion of HAL implementation.
* - Framework must be able to call this API multiple times for the same
* association.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_STARTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
* @return fates Vector of |WifiDebugTxPacketFateReport| instances corresponding
* to the packet fates.
*/
getDebugTxPacketFates()
generates (WifiStatus status, vec<WifiDebugTxPacketFateReport> fates);
/**
* API to retrieve fates of inbound packets.
* - HAL implementation must return the fates of
* all the frames received for the most recent association.
* The fate reports must follow the same order as their respective
* packets.
* - HAL implementation may choose (but is not required) to include
* reports for management frames.
* - Packets reported by firmware, but not recognized by driver,
* must be included. However, the ordering of the corresponding
* reports is at the discretion of HAL implementation.
* - Framework must be able to call this API multiple times for the same
* association.
*
* @return status WifiStatus of the operation.
* Possible status codes:
* |WifiStatusCode.SUCCESS|,
* |WifiStatusCode.ERROR_WIFI_IFACE_INVALID|,
* |WifiStatusCode.ERROR_NOT_SUPPORTED|,
* |WifiStatusCode.ERROR_NOT_STARTED|,
* |WifiStatusCode.ERROR_NOT_AVAILABLE|,
* |WifiStatusCode.ERROR_UNKNOWN|
* @return fates Vector of |WifiDebugRxPacketFateReport| instances corresponding
* to the packet fates.
*/
getDebugRxPacketFates()
generates (WifiStatus status, vec<WifiDebugRxPacketFateReport> fates);
};