sandy
/
PL286
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1 Commit
1 Branch
0 Tags
18 GiB
Tree: 99da0f2c72
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '99da0f2c72'
${ noResults }
PL286/hardware/invensense/65xx/libsensors_iio/MPLSensor.cpp

6442 lines
219 KiB
Raw Blame History

/*
* Copyright (C) 2012 Invensense, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define LOG_NDEBUG 0
//#define KLP 1 //Key Lime Pie Temporary Test Define
//see also the EXTRA_VERBOSE define in the MPLSensor.h header file
#include <fcntl.h>
#include <errno.h>
#include <math.h>
#include <float.h>
#include <poll.h>
#include <unistd.h>
#include <dirent.h>
#include <stdlib.h>
#include <sys/select.h>
#include <sys/syscall.h>
#include <dlfcn.h>
#include <pthread.h>
#include <cutils/log.h>
#include <utils/KeyedVector.h>
#include <utils/String8.h>
#include <string.h>
#include <linux/input.h>
#include <utils/Atomic.h>
#include "MPLSensor.h"
#include "PressureSensor.IIO.secondary.h"
#include "MPLSupport.h"
#include "sensor_params.h"
#include "invensense.h"
#include "invensense_adv.h"
#include "ml_stored_data.h"
#include "ml_load_dmp.h"
#include "ml_sysfs_helper.h"
#define ENABLE_MULTI_RATE
// #define TESTING
// #define USE_LPQ_AT_FASTEST
#define ENABLE_PRESSSURE
#ifdef THIRD_PARTY_ACCEL
#pragma message("HAL:build third party accel support")
#define USE_THIRD_PARTY_ACCEL (1)
#else
#define USE_THIRD_PARTY_ACCEL (0)
#endif
#define MAX_SYSFS_ATTRB (sizeof(struct sysfs_attrbs) / sizeof(char*))
/******************************************************************************/
/* MPL interface misc. */
/******************************************************************************/
static int hertz_request = 200;
#define DEFAULT_MPL_GYRO_RATE (20000L) //us
#define DEFAULT_MPL_COMPASS_RATE (20000L) //us
#define DEFAULT_HW_GYRO_RATE (100) //Hz
#define DEFAULT_HW_ACCEL_RATE (20) //ms
#define DEFAULT_HW_COMPASS_RATE (20000000L) //ns
#define DEFAULT_HW_AKMD_COMPASS_RATE (200000000L) //ns
/* convert ns to hardware units */
#define HW_GYRO_RATE_NS (1000000000LL / rate_request) // to Hz
#define HW_ACCEL_RATE_NS (rate_request / (1000000L)) // to ms
#define HW_COMPASS_RATE_NS (rate_request) // to ns
/* convert Hz to hardware units */
#define HW_GYRO_RATE_HZ (hertz_request)
#define HW_ACCEL_RATE_HZ (1000 / hertz_request)
#define HW_COMPASS_RATE_HZ (1000000000LL / hertz_request)
#define RATE_200HZ 5000000LL
#define RATE_15HZ 66667000LL
#define RATE_5HZ 200000000LL
// mask of virtual sensors that require gyro + accel + compass data
#define VIRTUAL_SENSOR_9AXES_MASK ( \
(1 << Orientation) \
| (1 << RotationVector) \
| (1 << LinearAccel) \
| (1 << Gravity) \
)
// mask of virtual sensors that require gyro + accel data (but no compass data)
#define VIRTUAL_SENSOR_GYRO_6AXES_MASK ( \
(1 << GameRotationVector) \
)
// mask of virtual sensors that require mag + accel data (but no gyro data)
#define VIRTUAL_SENSOR_MAG_6AXES_MASK ( \
(1 << GeomagneticRotationVector) \
)
// mask of all virtual sensors
#define VIRTUAL_SENSOR_ALL_MASK ( \
VIRTUAL_SENSOR_9AXES_MASK \
| VIRTUAL_SENSOR_GYRO_6AXES_MASK \
| VIRTUAL_SENSOR_MAG_6AXES_MASK \
)
static struct timespec mt_pre;
static struct sensor_t sSensorList[] =
{
{"MPL Gyroscope", "Invensense", 1,
SENSORS_GYROSCOPE_HANDLE,
SENSOR_TYPE_GYROSCOPE, 2000.0f, 1.0f, 0.5f, 10000, 0, 64, 0, 0, 0, 0, {}},
{"MPL Raw Gyroscope", "Invensense", 1,
SENSORS_RAW_GYROSCOPE_HANDLE,
SENSOR_TYPE_GYROSCOPE_UNCALIBRATED, 2000.0f, 1.0f, 0.5f, 10000, 0, 64, 0, 0, 0, 0, {}},
{"MPL Accelerometer", "Invensense", 1,
SENSORS_ACCELERATION_HANDLE,
SENSOR_TYPE_ACCELEROMETER, 10240.0f, 1.0f, 0.5f, 10000, 0, 64, 0, 0, 0, 0, {}},
{"MPL Magnetic Field", "Invensense", 1,
SENSORS_MAGNETIC_FIELD_HANDLE,
SENSOR_TYPE_MAGNETIC_FIELD, 10240.0f, 1.0f, 0.5f, 10000, 0, 64, 0, 0, 0, 0, {}},
{"MPL Raw Magnetic Field", "Invensense", 1,
SENSORS_RAW_MAGNETIC_FIELD_HANDLE,
SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED, 10240.0f, 1.0f, 0.5f, 10000, 0, 64, 0, 0, 0, 0, {}},
#ifdef ENABLE_PRESSURE
{"MPL Pressure", "Invensense", 1,
SENSORS_PRESSURE_HANDLE,
SENSOR_TYPE_PRESSURE, 10240.0f, 1.0f, 0.5f, 10000, 0, 64, 0, 0, 0, 0, {}},
#endif
{"MPL Orientation", "Invensense", 1,
SENSORS_ORIENTATION_HANDLE,
SENSOR_TYPE_ORIENTATION, 360.0f, 1.0f, 9.7f, 10000, 0, 0, 0, 0, 0, 0, {}},
{"MPL Rotation Vector", "Invensense", 1,
SENSORS_ROTATION_VECTOR_HANDLE,
SENSOR_TYPE_ROTATION_VECTOR, 10240.0f, 1.0f, 0.5f, 10000, 0, 0, 0, 0, 0, 0, {}},
{"MPL Game Rotation Vector", "Invensense", 1,
SENSORS_GAME_ROTATION_VECTOR_HANDLE,
SENSOR_TYPE_GAME_ROTATION_VECTOR, 10240.0f, 1.0f, 0.5f, 10000, 0, 42, 0, 0, 0, 0, {}},
{"MPL Linear Acceleration", "Invensense", 1,
SENSORS_LINEAR_ACCEL_HANDLE,
SENSOR_TYPE_LINEAR_ACCELERATION, 10240.0f, 1.0f, 0.5f, 10000, 0, 0, 0, 0, 0, 0, {}},
{"MPL Gravity", "Invensense", 1,
SENSORS_GRAVITY_HANDLE,
SENSOR_TYPE_GRAVITY, 10240.0f, 1.0f, 0.5f, 10000, 0, 0, 0, 0, 0, 0, {}},
{"MPL Significant Motion", "Invensense", 1,
SENSORS_SIGNIFICANT_MOTION_HANDLE,
SENSOR_TYPE_SIGNIFICANT_MOTION, 100.0f, 1.0f, 1.1f, 0, 0, 0, 0, 0, 0, 0, {}},
{"MPL Step Detector", "Invensense", 1,
SENSORS_PEDOMETER_HANDLE,
SENSOR_TYPE_STEP_DETECTOR, 100.0f, 1.0f, 1.1f, 0, 0, 64, 0, 0, 0, 0, {}},
{"MPL Step Counter", "Invensense", 1,
SENSORS_STEP_COUNTER_HANDLE,
SENSOR_TYPE_STEP_COUNTER, 100.0f, 1.0f, 1.1f, 0, 0, 0, 0, 0, 0, 0, {}},
{"MPL Geomagnetic Rotation Vector", "Invensense", 1,
SENSORS_GEOMAGNETIC_ROTATION_VECTOR_HANDLE,
SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR, 10240.0f, 1.0f, 0.5f, 10000, 0, 0, 0, 0, 0, 0, {}},
#ifdef ENABLE_DMP_SCREEN_AUTO_ROTATION
{"MPL Screen Orientation", "Invensense ", 1,
SENSORS_SCREEN_ORIENTATION_HANDLE,
SENSOR_TYPE_SCREEN_ORIENTATION, 100.0f, 1.0f, 1.1f, 0, 0, 0, 0, 0, 0, 0, {}},
#endif
};
MPLSensor *MPLSensor::gMPLSensor = NULL;
extern "C" {
void procData_cb_wrapper()
{
if(MPLSensor::gMPLSensor) {
MPLSensor::gMPLSensor->cbProcData();
}
}
void setCallbackObject(MPLSensor* gbpt)
{
MPLSensor::gMPLSensor = gbpt;
}
MPLSensor* getCallbackObject() {
return MPLSensor::gMPLSensor;
}
} // end of extern C
//#define INV_PLAYBACK_DBG
#ifdef INV_PLAYBACK_DBG
static FILE *logfile = NULL;
#endif
/*******************************************************************************
* MPLSensor class implementation
******************************************************************************/
// following extended initializer list would only be available with -std=c++11
// or -std=gnu+11
MPLSensor::MPLSensor(CompassSensor *compass, int (*m_pt2AccelCalLoadFunc)(long *))
: SensorBase(NULL, NULL),
mNewData(0),
mMasterSensorMask(INV_ALL_SENSORS),
mLocalSensorMask(0),
mPollTime(-1),
mStepCountPollTime(-1),
mHaveGoodMpuCal(0),
mGyroAccuracy(0),
mAccelAccuracy(0),
mCompassAccuracy(0),
mSampleCount(0),
dmp_orient_fd(-1),
mDmpOrientationEnabled(0),
dmp_sign_motion_fd(-1),
mDmpSignificantMotionEnabled(0),
dmp_pedometer_fd(-1),
mDmpPedometerEnabled(0),
mDmpStepCountEnabled(0),
mEnabled(0),
mBatchEnabled(0),
mFlushEnabled(-1),
mOldBatchEnabledMask(0),
mAccelInputReader(4),
mGyroInputReader(32),
mTempScale(0),
mTempOffset(0),
mTempCurrentTime(0),
mAccelScale(2),
mAccelSelfTestScale(2),
mGyroScale(2000),
mGyroSelfTestScale(2000),
mCompassScale(0),
mFactoryGyroBiasAvailable(false),
mGyroBiasAvailable(false),
mGyroBiasApplied(false),
mFactoryAccelBiasAvailable(false),
mAccelBiasAvailable(false),
mAccelBiasApplied(false),
mPendingMask(0),
mSensorMask(0),
mMplFeatureActiveMask(0),
mFeatureActiveMask(0),
mDmpOn(0),
mPedUpdate(0),
mPressureUpdate(0),
mQuatSensorTimestamp(0),
mStepSensorTimestamp(0),
mLastStepCount(0),
mLeftOverBufferSize(0),
mInitial6QuatValueAvailable(0),
mFlushBatchSet(0),
mSkipReadEvents(0) {
VFUNC_LOG;
inv_error_t rv;
int fd;
char *ver_str;
mCompassSensor = compass;
LOGV_IF(EXTRA_VERBOSE,
"HAL:MPLSensor constructor : NumSensors = %d", NumSensors);
pthread_mutex_init(&mMplMutex, NULL);
pthread_mutex_init(&mHALMutex, NULL);
memset(mGyroOrientation, 0, sizeof(mGyroOrientation));
memset(mAccelOrientation, 0, sizeof(mAccelOrientation));
/* setup sysfs paths */
inv_init_sysfs_attributes();
/* get chip name */
if (inv_get_chip_name(chip_ID) != INV_SUCCESS) {
LOGE("HAL:ERR- Failed to get chip ID\n");
} else {
LOGV_IF(PROCESS_VERBOSE, "HAL:Chip ID= %s\n", chip_ID);
}
enable_iio_sysfs();
/* instantiate pressure sensor on secondary bus */
if (strcmp(mSysfsPath, "") != 0) {
mPressureSensor = new PressureSensor((const char*)mSysfsPath);
} else {
LOGE("HAL:ERR - Failed to instantiate pressure sensor class");
}
/* reset driver master enable */
masterEnable(0);
//Always load DMP for KLP
/* Load DMP image if capable, ie. MPU6xxx/9xxx */
loadDMP();
/* open temperature fd for temp comp */
LOGV_IF(EXTRA_VERBOSE, "HAL:gyro temperature path: %s", mpu.temperature);
gyro_temperature_fd = open(mpu.temperature, O_RDONLY);
if (gyro_temperature_fd == -1) {
LOGE("HAL:could not open temperature node");
} else {
LOGV_IF(EXTRA_VERBOSE,
"HAL:temperature_fd opened: %s", mpu.temperature);
}
/* read gyro FSR to calculate accel scale later */
char gyroBuf[5];
int count = 0;
LOGV_IF(SYSFS_VERBOSE,
"HAL:sysfs:cat %s (%lld)", mpu.gyro_fsr, getTimestamp());
fd = open(mpu.gyro_fsr, O_RDONLY);
if(fd < 0) {
LOGE("HAL:Error opening gyro FSR");
} else {
memset(gyroBuf, 0, sizeof(gyroBuf));
count = read_attribute_sensor(fd, gyroBuf, sizeof(gyroBuf));
if(count < 1) {
LOGE("HAL:Error reading gyro FSR");
} else {
count = sscanf(gyroBuf, "%ld", &mGyroScale);
if(count)
LOGV_IF(EXTRA_VERBOSE, "HAL:Gyro FSR used %ld", mGyroScale);
}
close(fd);
}
/* read gyro self test scale used to calculate factory cal bias later */
char gyroScale[5];
LOGV_IF(SYSFS_VERBOSE,
"HAL:sysfs:cat %s (%lld)", mpu.in_gyro_self_test_scale, getTimestamp());
fd = open(mpu.in_gyro_self_test_scale, O_RDONLY);
if(fd < 0) {
LOGE("HAL:Error opening gyro self test scale");
} else {
memset(gyroBuf, 0, sizeof(gyroBuf));
count = read_attribute_sensor(fd, gyroScale, sizeof(gyroScale));
if(count < 1) {
LOGE("HAL:Error reading gyro self test scale");
} else {
count = sscanf(gyroScale, "%ld", &mGyroSelfTestScale);
if(count)
LOGV_IF(EXTRA_VERBOSE, "HAL:Gyro self test scale used %ld", mGyroSelfTestScale);
}
close(fd);
}
/* open Factory Gyro Bias fd */
/* mFactoryGyBias contains bias values that will be used for device offset */
memset(mFactoryGyroBias, 0, sizeof(mFactoryGyroBias));
LOGV_IF(EXTRA_VERBOSE, "HAL:factory gyro x offset path: %s", mpu.in_gyro_x_offset);
LOGV_IF(EXTRA_VERBOSE, "HAL:factory gyro y offset path: %s", mpu.in_gyro_y_offset);
LOGV_IF(EXTRA_VERBOSE, "HAL:factory gyro z offset path: %s", mpu.in_gyro_z_offset);
gyro_x_offset_fd = open(mpu.in_gyro_x_offset, O_RDWR);
gyro_y_offset_fd = open(mpu.in_gyro_y_offset, O_RDWR);
gyro_z_offset_fd = open(mpu.in_gyro_z_offset, O_RDWR);
if (gyro_x_offset_fd == -1 ||
gyro_y_offset_fd == -1 || gyro_z_offset_fd == -1) {
LOGE("HAL:could not open factory gyro calibrated bias");
} else {
LOGV_IF(EXTRA_VERBOSE,
"HAL:gyro_offset opened");
}
/* open Gyro Bias fd */
/* mGyroBias contains bias values that will be used for framework */
/* mGyroChipBias contains bias values that will be used for dmp */
memset(mGyroBias, 0, sizeof(mGyroBias));
memset(mGyroChipBias, 0, sizeof(mGyroChipBias));
LOGV_IF(EXTRA_VERBOSE, "HAL: gyro x dmp bias path: %s", mpu.in_gyro_x_dmp_bias);
LOGV_IF(EXTRA_VERBOSE, "HAL: gyro y dmp bias path: %s", mpu.in_gyro_y_dmp_bias);
LOGV_IF(EXTRA_VERBOSE, "HAL: gyro z dmp bias path: %s", mpu.in_gyro_z_dmp_bias);
gyro_x_dmp_bias_fd = open(mpu.in_gyro_x_dmp_bias, O_RDWR);
gyro_y_dmp_bias_fd = open(mpu.in_gyro_y_dmp_bias, O_RDWR);
gyro_z_dmp_bias_fd = open(mpu.in_gyro_z_dmp_bias, O_RDWR);
if (gyro_x_dmp_bias_fd == -1 ||
gyro_y_dmp_bias_fd == -1 || gyro_z_dmp_bias_fd == -1) {
LOGE("HAL:could not open gyro DMP calibrated bias");
} else {
LOGV_IF(EXTRA_VERBOSE,
"HAL:gyro_dmp_bias opened");
}
/* read accel FSR to calcuate accel scale later */
if (USE_THIRD_PARTY_ACCEL == 0) {
char buf[3];
int count = 0;
LOGV_IF(SYSFS_VERBOSE,
"HAL:sysfs:cat %s (%lld)", mpu.accel_fsr, getTimestamp());
fd = open(mpu.accel_fsr, O_RDONLY);
if(fd < 0) {
LOGE("HAL:Error opening accel FSR");
} else {
memset(buf, 0, sizeof(buf));
count = read_attribute_sensor(fd, buf, sizeof(buf));
if(count < 1) {
LOGE("HAL:Error reading accel FSR");
} else {
count = sscanf(buf, "%d", &mAccelScale);
if(count)
LOGV_IF(EXTRA_VERBOSE, "HAL:Accel FSR used %d", mAccelScale);
}
close(fd);
}
/* read accel self test scale used to calculate factory cal bias later */
char accelScale[5];
LOGV_IF(SYSFS_VERBOSE,
"HAL:sysfs:cat %s (%lld)", mpu.in_accel_self_test_scale, getTimestamp());
fd = open(mpu.in_accel_self_test_scale, O_RDONLY);
if(fd < 0) {
LOGE("HAL:Error opening gyro self test scale");
} else {
memset(buf, 0, sizeof(buf));
count = read_attribute_sensor(fd, accelScale, sizeof(accelScale));
if(count < 1) {
LOGE("HAL:Error reading accel self test scale");
} else {
count = sscanf(accelScale, "%ld", &mAccelSelfTestScale);
if(count)
LOGV_IF(EXTRA_VERBOSE, "HAL:Accel self test scale used %ld", mAccelSelfTestScale);
}
close(fd);
}
/* open Factory Accel Bias fd */
/* mFactoryAccelBias contains bias values that will be used for device offset */
memset(mFactoryAccelBias, 0, sizeof(mFactoryAccelBias));
LOGV_IF(EXTRA_VERBOSE, "HAL:factory accel x offset path: %s", mpu.in_accel_x_offset);
LOGV_IF(EXTRA_VERBOSE, "HAL:factory accel y offset path: %s", mpu.in_accel_y_offset);
LOGV_IF(EXTRA_VERBOSE, "HAL:factory accel z offset path: %s", mpu.in_accel_z_offset);
accel_x_offset_fd = open(mpu.in_accel_x_offset, O_RDWR);
accel_y_offset_fd = open(mpu.in_accel_y_offset, O_RDWR);
accel_z_offset_fd = open(mpu.in_accel_z_offset, O_RDWR);
if (accel_x_offset_fd == -1 ||
accel_y_offset_fd == -1 || accel_z_offset_fd == -1) {
LOGE("HAL:could not open factory accel calibrated bias");
} else {
LOGV_IF(EXTRA_VERBOSE,
"HAL:accel_offset opened");
}
/* open Accel Bias fd */
/* mAccelBias contains bias that will be used for dmp */
memset(mAccelBias, 0, sizeof(mAccelBias));
LOGV_IF(EXTRA_VERBOSE, "HAL:accel x dmp bias path: %s", mpu.in_accel_x_dmp_bias);
LOGV_IF(EXTRA_VERBOSE, "HAL:accel y dmp bias path: %s", mpu.in_accel_y_dmp_bias);
LOGV_IF(EXTRA_VERBOSE, "HAL:accel z dmp bias path: %s", mpu.in_accel_z_dmp_bias);
accel_x_dmp_bias_fd = open(mpu.in_accel_x_dmp_bias, O_RDWR);
accel_y_dmp_bias_fd = open(mpu.in_accel_y_dmp_bias, O_RDWR);
accel_z_dmp_bias_fd = open(mpu.in_accel_z_dmp_bias, O_RDWR);
if (accel_x_dmp_bias_fd == -1 ||
accel_y_dmp_bias_fd == -1 || accel_z_dmp_bias_fd == -1) {
LOGE("HAL:could not open accel DMP calibrated bias");
} else {
LOGV_IF(EXTRA_VERBOSE,
"HAL:accel_dmp_bias opened");
}
}
dmp_sign_motion_fd = open(mpu.event_smd, O_RDONLY | O_NONBLOCK);
if (dmp_sign_motion_fd < 0) {
LOGE("HAL:ERR couldn't open dmp_sign_motion node");
} else {
LOGV_IF(ENG_VERBOSE,
"HAL:dmp_sign_motion_fd opened : %d", dmp_sign_motion_fd);
}
dmp_pedometer_fd = open(mpu.event_pedometer, O_RDONLY | O_NONBLOCK);
if (dmp_pedometer_fd < 0) {
LOGE("HAL:ERR couldn't open dmp_pedometer node");
} else {
LOGV_IF(ENG_VERBOSE,
"HAL:dmp_pedometer_fd opened : %d", dmp_pedometer_fd);
}
initBias();
(void)inv_get_version(&ver_str);
LOGI("%s\n", ver_str);
/* setup MPL */
inv_constructor_init();
#ifdef INV_PLAYBACK_DBG
LOGV_IF(PROCESS_VERBOSE, "HAL:inv_turn_on_data_logging");
logfile = fopen("/data/playback.bin", "w+");
if (logfile)
inv_turn_on_data_logging(logfile);
#endif
/* setup orientation matrix and scale */
inv_set_device_properties();
/* initialize sensor data */
memset(mPendingEvents, 0, sizeof(mPendingEvents));
mPendingEvents[RotationVector].version = sizeof(sensors_event_t);
mPendingEvents[RotationVector].sensor = ID_RV;
mPendingEvents[RotationVector].type = SENSOR_TYPE_ROTATION_VECTOR;
mPendingEvents[RotationVector].acceleration.status
= SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[GameRotationVector].version = sizeof(sensors_event_t);
mPendingEvents[GameRotationVector].sensor = ID_GRV;
mPendingEvents[GameRotationVector].type = SENSOR_TYPE_GAME_ROTATION_VECTOR;
mPendingEvents[GameRotationVector].acceleration.status
= SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[LinearAccel].version = sizeof(sensors_event_t);
mPendingEvents[LinearAccel].sensor = ID_LA;
mPendingEvents[LinearAccel].type = SENSOR_TYPE_LINEAR_ACCELERATION;
mPendingEvents[LinearAccel].acceleration.status
= SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[Gravity].version = sizeof(sensors_event_t);
mPendingEvents[Gravity].sensor = ID_GR;
mPendingEvents[Gravity].type = SENSOR_TYPE_GRAVITY;
mPendingEvents[Gravity].acceleration.status = SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[Gyro].version = sizeof(sensors_event_t);
mPendingEvents[Gyro].sensor = ID_GY;
mPendingEvents[Gyro].type = SENSOR_TYPE_GYROSCOPE;
mPendingEvents[Gyro].gyro.status = SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[RawGyro].version = sizeof(sensors_event_t);
mPendingEvents[RawGyro].sensor = ID_RG;
mPendingEvents[RawGyro].type = SENSOR_TYPE_GYROSCOPE_UNCALIBRATED;
mPendingEvents[RawGyro].gyro.status = SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[Accelerometer].version = sizeof(sensors_event_t);
mPendingEvents[Accelerometer].sensor = ID_A;
mPendingEvents[Accelerometer].type = SENSOR_TYPE_ACCELEROMETER;
mPendingEvents[Accelerometer].acceleration.status
= SENSOR_STATUS_ACCURACY_HIGH;
/* Invensense compass calibration */
mPendingEvents[MagneticField].version = sizeof(sensors_event_t);
mPendingEvents[MagneticField].sensor = ID_M;
mPendingEvents[MagneticField].type = SENSOR_TYPE_MAGNETIC_FIELD;
mPendingEvents[MagneticField].magnetic.status =
SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[RawMagneticField].version = sizeof(sensors_event_t);
mPendingEvents[RawMagneticField].sensor = ID_RM;
mPendingEvents[RawMagneticField].type = SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED;
mPendingEvents[RawMagneticField].magnetic.status =
SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[Pressure].version = sizeof(sensors_event_t);
mPendingEvents[Pressure].sensor = ID_PS;
mPendingEvents[Pressure].type = SENSOR_TYPE_PRESSURE;
mPendingEvents[Pressure].magnetic.status =
SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[Orientation].version = sizeof(sensors_event_t);
mPendingEvents[Orientation].sensor = ID_O;
mPendingEvents[Orientation].type = SENSOR_TYPE_ORIENTATION;
mPendingEvents[Orientation].orientation.status
= SENSOR_STATUS_ACCURACY_HIGH;
mPendingEvents[GeomagneticRotationVector].version = sizeof(sensors_event_t);
mPendingEvents[GeomagneticRotationVector].sensor = ID_GMRV;
mPendingEvents[GeomagneticRotationVector].type
= SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR;
mPendingEvents[GeomagneticRotationVector].acceleration.status
= SENSOR_STATUS_ACCURACY_HIGH;
#ifndef KLP
mHandlers[RotationVector] = &MPLSensor::rvHandler;
#else
mHandlers[RotationVector] = &MPLSensor::grvHandler;
#endif
mHandlers[GameRotationVector] = &MPLSensor::grvHandler;
mHandlers[LinearAccel] = &MPLSensor::laHandler;
mHandlers[Gravity] = &MPLSensor::gravHandler;
#ifndef KLP
mHandlers[Gyro] = &MPLSensor::gyroHandler;
#else
mHandlers[Gyro] = &MPLSensor::rawGyroHandler;
#endif
mHandlers[RawGyro] = &MPLSensor::rawGyroHandler;
mHandlers[Accelerometer] = &MPLSensor::accelHandler;
#ifndef KLP
mHandlers[MagneticField] = &MPLSensor::compassHandler;
#else
mHandlers[MagneticField] = &MPLSensor::rawCompassHandler;
#endif
mHandlers[RawMagneticField] = &MPLSensor::rawCompassHandler;
mHandlers[Orientation] = &MPLSensor::orienHandler;
mHandlers[GeomagneticRotationVector] = &MPLSensor::gmHandler;
mHandlers[Pressure] = &MPLSensor::psHandler;
for (int i = 0; i < NumSensors; i++) {
mDelays[i] = 1000000000LL;
mBatchDelays[i] = 1000000000LL;
mBatchTimeouts[i] = 100000000000LL;
}
/* initialize Compass Bias */
memset(mCompassBias, 0, sizeof(mCompassBias));
/* initialize Factory Accel Bias */
memset(mFactoryAccelBias, 0, sizeof(mFactoryAccelBias));
/* initialize Gyro Bias */
memset(mGyroBias, 0, sizeof(mGyroBias));
memset(mGyroChipBias, 0, sizeof(mGyroChipBias));
/* load calibration file from /data/inv_cal_data.bin */
rv = inv_load_calibration();
if(rv == INV_SUCCESS) {
LOGV_IF(PROCESS_VERBOSE, "HAL:Calibration file successfully loaded");
/* Get initial values */
getCompassBias();
getGyroBias();
if (mGyroBiasAvailable) {
setGyroBias();
}
getAccelBias();
getFactoryGyroBias();
if (mFactoryGyroBiasAvailable) {
setFactoryGyroBias();
}
getFactoryAccelBias();
if (mFactoryAccelBiasAvailable) {
setFactoryAccelBias();
}
}
else
LOGE("HAL:Could not open or load MPL calibration file (%d)", rv);
/* takes external accel calibration load workflow */
if( m_pt2AccelCalLoadFunc != NULL) {
long accel_offset[3];
long tmp_offset[3];
int result = m_pt2AccelCalLoadFunc(accel_offset);
if(result)
LOGW("HAL:Vendor accelerometer calibration file load failed %d\n",
result);
else {
LOGW("HAL:Vendor accelerometer calibration file successfully "
"loaded");
inv_get_mpl_accel_bias(tmp_offset, NULL);
LOGV_IF(PROCESS_VERBOSE,
"HAL:Original accel offset, %ld, %ld, %ld\n",
tmp_offset[0], tmp_offset[1], tmp_offset[2]);
inv_set_accel_bias_mask(accel_offset, mAccelAccuracy,4);
inv_get_mpl_accel_bias(tmp_offset, NULL);
LOGV_IF(PROCESS_VERBOSE, "HAL:Set accel offset, %ld, %ld, %ld\n",
tmp_offset[0], tmp_offset[1], tmp_offset[2]);
}
}
/* end of external accel calibration load workflow */
/* disable driver master enable the first sensor goes on */
masterEnable(0);
enableGyro(0);
enableLowPowerAccel(0);
enableAccel(0);
enableCompass(0,0);
enablePressure(0);
enableBatch(0);
if (isLowPowerQuatEnabled()) {
enableLPQuaternion(0);
}
if (isDmpDisplayOrientationOn()) {
// open DMP Orient Fd
openDmpOrientFd();
enableDmpOrientation(!isDmpScreenAutoRotationEnabled());
}
}
void MPLSensor::enable_iio_sysfs(void)
{
VFUNC_LOG;
char iio_device_node[MAX_CHIP_ID_LEN];
FILE *tempFp = NULL;
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo 1 > %s (%lld)",
mpu.in_timestamp_en, getTimestamp());
// Either fopen()/open() are okay for sysfs access
// developers could choose what they want
// with fopen(), the benefit is that fprintf()/fscanf() are available
tempFp = fopen(mpu.in_timestamp_en, "w");
if (tempFp == NULL) {
LOGE("HAL:could not open timestamp enable");
} else {
if(fprintf(tempFp, "%d", 1) < 0 || fclose(tempFp) < 0) {
LOGE("HAL:could not enable timestamp");
}
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
IIO_BUFFER_LENGTH, mpu.buffer_length, getTimestamp());
tempFp = fopen(mpu.buffer_length, "w");
if (tempFp == NULL) {
LOGE("HAL:could not open buffer length");
} else {
if (fprintf(tempFp, "%d", IIO_BUFFER_LENGTH) < 0 || fclose(tempFp) < 0) {
LOGE("HAL:could not write buffer length");
}
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
1, mpu.chip_enable, getTimestamp());
tempFp = fopen(mpu.chip_enable, "w");
if (tempFp == NULL) {
LOGE("HAL:could not open chip enable");
} else {
if (fprintf(tempFp, "%d", 1) < 0 || fclose(tempFp) < 0) {
LOGE("HAL:could not write chip enable");
}
}
inv_get_iio_device_node(iio_device_node);
iio_fd = open(iio_device_node, O_RDONLY);
if (iio_fd < 0) {
LOGE("HAL:could not open iio device node");
} else {
LOGV_IF(ENG_VERBOSE, "HAL:iio iio_fd opened : %d", iio_fd);
}
}
int MPLSensor::inv_constructor_init(void)
{
VFUNC_LOG;
inv_error_t result = inv_init_mpl();
if (result) {
LOGE("HAL:inv_init_mpl() failed");
return result;
}
result = inv_constructor_default_enable();
result = inv_start_mpl();
if (result) {
LOGE("HAL:inv_start_mpl() failed");
LOG_RESULT_LOCATION(result);
return result;
}
return result;
}
int MPLSensor::inv_constructor_default_enable(void)
{
VFUNC_LOG;
inv_error_t result;
/*******************************************************************************
********************************************************************************
The InvenSense binary file (libmplmpu.so) is subject to Google's standard terms
and conditions as accepted in the click-through agreement required to download
this library.
The library includes, but is not limited to the following function calls:
inv_enable_quaternion().
ANY VIOLATION OF SUCH TERMS AND CONDITIONS WILL BE STRICTLY ENFORCED.
********************************************************************************
*******************************************************************************/
result = inv_enable_quaternion();
if (result) {
LOGE("HAL:Cannot enable quaternion\n");
return result;
}
result = inv_enable_in_use_auto_calibration();
if (result) {
return result;
}
result = inv_enable_fast_nomot();
if (result) {
return result;
}
result = inv_enable_gyro_tc();
if (result) {
return result;
}
result = inv_enable_hal_outputs();
if (result) {
return result;
}
if (!mCompassSensor->providesCalibration()) {
/* Invensense compass calibration */
LOGV_IF(ENG_VERBOSE, "HAL:Invensense vector compass cal enabled");
result = inv_enable_vector_compass_cal();
if (result) {
LOG_RESULT_LOCATION(result);
return result;
} else {
mMplFeatureActiveMask |= INV_COMPASS_CAL;
}
// specify MPL's trust weight, used by compass algorithms
inv_vector_compass_cal_sensitivity(3);
/* disabled by default
result = inv_enable_compass_bias_w_gyro();
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
*/
result = inv_enable_heading_from_gyro();
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
result = inv_enable_magnetic_disturbance();
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
//inv_enable_magnetic_disturbance_logging();
}
result = inv_enable_9x_sensor_fusion();
if (result) {
LOG_RESULT_LOCATION(result);
return result;
} else {
// 9x sensor fusion enables Compass fit
mMplFeatureActiveMask |= INV_COMPASS_FIT;
}
result = inv_enable_no_gyro_fusion();
if (result) {
LOG_RESULT_LOCATION(result);
return result;
}
return result;
}
/* TODO: create function pointers to calculate scale */
void MPLSensor::inv_set_device_properties(void)
{
VFUNC_LOG;
unsigned short orient;
inv_get_sensors_orientation();
inv_set_gyro_sample_rate(DEFAULT_MPL_GYRO_RATE);
inv_set_compass_sample_rate(DEFAULT_MPL_COMPASS_RATE);
/* gyro setup */
orient = inv_orientation_matrix_to_scalar(mGyroOrientation);
inv_set_gyro_orientation_and_scale(orient, mGyroScale << 15);
LOGI_IF(EXTRA_VERBOSE, "HAL: Set MPL Gyro Scale %ld", mGyroScale << 15);
/* accel setup */
orient = inv_orientation_matrix_to_scalar(mAccelOrientation);
/* use for third party accel input subsystem driver
inv_set_accel_orientation_and_scale(orient, 1LL << 22);
*/
inv_set_accel_orientation_and_scale(orient, (long)mAccelScale << 15);
LOGI_IF(EXTRA_VERBOSE,
"HAL: Set MPL Accel Scale %ld", (long)mAccelScale << 15);
/* compass setup */
signed char orientMtx[9];
mCompassSensor->getOrientationMatrix(orientMtx);
orient =
inv_orientation_matrix_to_scalar(orientMtx);
long sensitivity;
sensitivity = mCompassSensor->getSensitivity();
inv_set_compass_orientation_and_scale(orient, sensitivity);
mCompassScale = sensitivity;
LOGI_IF(EXTRA_VERBOSE,
"HAL: Set MPL Compass Scale %ld", mCompassScale);
}
void MPLSensor::loadDMP(void)
{
VFUNC_LOG;
int fd;
FILE *fptr;
if (isMpuNonDmp()) {
//DMP support only for MPU6xxx/9xxx currently
return;
}
/* load DMP firmware */
LOGV_IF(SYSFS_VERBOSE,
"HAL:sysfs:cat %s (%lld)", mpu.firmware_loaded, getTimestamp());
fd = open(mpu.firmware_loaded, O_RDONLY);
if(fd < 0) {
LOGE("HAL:could not open dmp state");
} else {
if(inv_read_dmp_state(fd) == 0) {
LOGV_IF(EXTRA_VERBOSE, "HAL:load dmp: %s", mpu.dmp_firmware);
fptr = fopen(mpu.dmp_firmware, "w");
if(fptr == NULL) {
LOGE("HAL:could not open dmp_firmware");
} else {
if (inv_load_dmp(fptr) < 0 || fclose(fptr) < 0) {
LOGE("HAL:load DMP failed");
} else {
LOGV_IF(PROCESS_VERBOSE, "HAL:DMP loaded");
}
}
} else {
LOGV_IF(ENG_VERBOSE, "HAL:DMP is already loaded");
}
}
// onDmp(1); //Can't enable here. See note onDmp()
}
void MPLSensor::inv_get_sensors_orientation(void)
{
VFUNC_LOG;
FILE *fptr;
// get gyro orientation
LOGV_IF(SYSFS_VERBOSE,
"HAL:sysfs:cat %s (%lld)", mpu.gyro_orient, getTimestamp());
fptr = fopen(mpu.gyro_orient, "r");
if (fptr != NULL) {
int om[9];
if (fscanf(fptr, "%d,%d,%d,%d,%d,%d,%d,%d,%d",
&om[0], &om[1], &om[2], &om[3], &om[4], &om[5],
&om[6], &om[7], &om[8]) < 0 || fclose(fptr) < 0) {
LOGE("HAL:Could not read gyro mounting matrix");
} else {
LOGV_IF(EXTRA_VERBOSE,
"HAL:gyro mounting matrix: "
"%+d %+d %+d %+d %+d %+d %+d %+d %+d",
om[0], om[1], om[2], om[3], om[4], om[5], om[6], om[7], om[8]);
mGyroOrientation[0] = om[0];
mGyroOrientation[1] = om[1];
mGyroOrientation[2] = om[2];
mGyroOrientation[3] = om[3];
mGyroOrientation[4] = om[4];
mGyroOrientation[5] = om[5];
mGyroOrientation[6] = om[6];
mGyroOrientation[7] = om[7];
mGyroOrientation[8] = om[8];
}
}
// get accel orientation
LOGV_IF(SYSFS_VERBOSE,
"HAL:sysfs:cat %s (%lld)", mpu.accel_orient, getTimestamp());
fptr = fopen(mpu.accel_orient, "r");
if (fptr != NULL) {
int om[9];
if (fscanf(fptr, "%d,%d,%d,%d,%d,%d,%d,%d,%d",
&om[0], &om[1], &om[2], &om[3], &om[4], &om[5],
&om[6], &om[7], &om[8]) < 0 || fclose(fptr) < 0) {
LOGE("HAL:could not read accel mounting matrix");
} else {
LOGV_IF(EXTRA_VERBOSE,
"HAL:accel mounting matrix: "
"%+d %+d %+d %+d %+d %+d %+d %+d %+d",
om[0], om[1], om[2], om[3], om[4], om[5], om[6], om[7], om[8]);
mAccelOrientation[0] = om[0];
mAccelOrientation[1] = om[1];
mAccelOrientation[2] = om[2];
mAccelOrientation[3] = om[3];
mAccelOrientation[4] = om[4];
mAccelOrientation[5] = om[5];
mAccelOrientation[6] = om[6];
mAccelOrientation[7] = om[7];
mAccelOrientation[8] = om[8];
}
}
}
MPLSensor::~MPLSensor()
{
VFUNC_LOG;
/* Close open fds */
if (iio_fd > 0)
close(iio_fd);
if( accel_fd > 0 )
close(accel_fd );
if (gyro_temperature_fd > 0)
close(gyro_temperature_fd);
if (sysfs_names_ptr)
free(sysfs_names_ptr);
closeDmpOrientFd();
if (accel_x_dmp_bias_fd > 0) {
close(accel_x_dmp_bias_fd);
}
if (accel_y_dmp_bias_fd > 0) {
close(accel_y_dmp_bias_fd);
}
if (accel_z_dmp_bias_fd > 0) {
close(accel_z_dmp_bias_fd);
}
if (gyro_x_dmp_bias_fd > 0) {
close(gyro_x_dmp_bias_fd);
}
if (gyro_y_dmp_bias_fd > 0) {
close(gyro_y_dmp_bias_fd);
}
if (gyro_z_dmp_bias_fd > 0) {
close(gyro_z_dmp_bias_fd);
}
if (gyro_x_offset_fd > 0) {
close(gyro_x_dmp_bias_fd);
}
if (gyro_y_offset_fd > 0) {
close(gyro_y_offset_fd);
}
if (gyro_z_offset_fd > 0) {
close(accel_z_offset_fd);
}
/* Turn off Gyro master enable */
/* A workaround until driver handles it */
/* TODO: Turn off and close all sensors */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.master_enable, getTimestamp());
write_sysfs_int(mpu.master_enable, 0);
#ifdef INV_PLAYBACK_DBG
inv_turn_off_data_logging();
if (fclose(logfile) < 0) {
LOGE("cannot close debug log file");
}
#endif
}
#define GY_ENABLED ((1 << ID_GY) & enabled_sensors)
#define RGY_ENABLED ((1 << ID_RG) & enabled_sensors)
#define A_ENABLED ((1 << ID_A) & enabled_sensors)
#define M_ENABLED ((1 << ID_M) & enabled_sensors)
#define RM_ENABLED ((1 << ID_RM) & enabled_sensors)
#define PS_ENABLED ((1 << ID_PS) & enabled_sensors)
#define O_ENABLED ((1 << ID_O) & enabled_sensors)
#define LA_ENABLED ((1 << ID_LA) & enabled_sensors)
#define GR_ENABLED ((1 << ID_GR) & enabled_sensors)
#define RV_ENABLED ((1 << ID_RV) & enabled_sensors)
#define GRV_ENABLED ((1 << ID_GRV) & enabled_sensors)
#define GMRV_ENABLED ((1 << ID_GMRV) & enabled_sensors)
/* TODO: this step is optional, remove? */
int MPLSensor::setGyroInitialState(void)
{
VFUNC_LOG;
int res = 0;
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
HW_GYRO_RATE_HZ, mpu.gyro_rate, getTimestamp());
int fd = open(mpu.gyro_rate, O_RDWR);
res = errno;
if(fd < 0) {
LOGE("HAL:open of %s failed with '%s' (%d)",
mpu.gyro_rate, strerror(res), res);
return res;
}
res = write_attribute_sensor(fd, HW_GYRO_RATE_HZ);
if(res < 0) {
LOGE("HAL:write_attribute_sensor : error writing %s with %d",
mpu.gyro_rate, HW_GYRO_RATE_HZ);
return res;
}
// Setting LPF is deprecated
return 0;
}
/* this applies to BMA250 Input Subsystem Driver only */
int MPLSensor::setAccelInitialState()
{
VFUNC_LOG;
struct input_absinfo absinfo_x;
struct input_absinfo absinfo_y;
struct input_absinfo absinfo_z;
float value;
if (!ioctl(accel_fd, EVIOCGABS(EVENT_TYPE_ACCEL_X), &absinfo_x) &&
!ioctl(accel_fd, EVIOCGABS(EVENT_TYPE_ACCEL_Y), &absinfo_y) &&
!ioctl(accel_fd, EVIOCGABS(EVENT_TYPE_ACCEL_Z), &absinfo_z)) {
value = absinfo_x.value;
mPendingEvents[Accelerometer].data[0] = value * CONVERT_A_X;
value = absinfo_y.value;
mPendingEvents[Accelerometer].data[1] = value * CONVERT_A_Y;
value = absinfo_z.value;
mPendingEvents[Accelerometer].data[2] = value * CONVERT_A_Z;
//mHasPendingEvent = true;
}
return 0;
}
int MPLSensor::onDmp(int en)
{
VFUNC_LOG;
int res = -1;
int status;
mDmpOn = en;
//Sequence to enable DMP
//1. Load DMP image if not already loaded
//2. Either Gyro or Accel must be enabled/configured before next step
//3. Enable DMP
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:cat %s (%lld)",
mpu.firmware_loaded, getTimestamp());
if(read_sysfs_int(mpu.firmware_loaded, &status) < 0){
LOGE("HAL:ERR can't get firmware_loaded status");
} else if (status == 1) {
//Write only if curr DMP state <> request
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:cat %s (%lld)",
mpu.dmp_on, getTimestamp());
if (read_sysfs_int(mpu.dmp_on, &status) < 0) {
LOGE("HAL:ERR can't read DMP state");
} else if (status != en) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.dmp_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_on, en) < 0) {
LOGE("HAL:ERR can't write dmp_on");
} else {
mDmpOn = en;
res = 0; //Indicate write successful
if(!en) {
setAccelBias();
}
}
//Enable DMP interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.dmp_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_int_on, en) < 0) {
LOGE("HAL:ERR can't en/dis DMP interrupt");
}
// disable DMP event interrupt if needed
if (!en) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, en) < 0) {
res = -1;
LOGE("HAL:ERR can't enable DMP event interrupt");
}
}
} else {
mDmpOn = en;
res = 0; //DMP already set as requested
if(!en) {
setAccelBias();
}
}
} else {
LOGE("HAL:ERR No DMP image");
}
return res;
}
/* called when batch and hw sensor enabled*/
int MPLSensor::enablePedIndicator(int en)
{
VFUNC_LOG;
int res = 0;
if (en) {
if (!(mFeatureActiveMask & INV_DMP_PED_QUATERNION)) {
//Disable DMP Pedometer Interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.pedometer_int_on, getTimestamp());
if (write_sysfs_int(mpu.pedometer_int_on, 0) < 0) {
LOGE("HAL:ERR can't enable Android Pedometer Interrupt");
res = -1; // indicate an err
return res;
}
}
}
LOGV_IF(ENG_VERBOSE, "HAL:Toggling step indicator to %d", en);
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.step_indicator_on, getTimestamp());
if (write_sysfs_int(mpu.step_indicator_on, en) < 0) {
res = -1;
LOGE("HAL:ERR can't write to DMP step_indicator_on");
}
return res;
}
int MPLSensor::checkPedStandaloneEnabled(void)
{
VFUNC_LOG;
return ((mFeatureActiveMask & INV_DMP_PED_STANDALONE)? 1:0);
}
/* This feature is only used in batch mode */
/* Stand-alone Step Detector */
int MPLSensor::enablePedStandalone(int en)
{
VFUNC_LOG;
if (!en) {
enablePedStandaloneData(0);
mFeatureActiveMask &= ~INV_DMP_PED_STANDALONE;
if (mFeatureActiveMask == 0) {
onDmp(0);
} else if(mFeatureActiveMask & INV_DMP_PEDOMETER) {
//Re-enable DMP Pedometer Interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
1, mpu.pedometer_int_on, getTimestamp());
if (write_sysfs_int(mpu.pedometer_int_on, 1) < 0) {
LOGE("HAL:ERR can't enable Android Pedometer Interrupt");
return (-1);
}
//Disable data interrupt if no continuous data
if (mEnabled == 0) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
1, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, 1) < 0) {
LOGE("HAL:ERR can't enable DMP event interrupt");
return (-1);
}
}
}
LOGV_IF(ENG_VERBOSE, "HAL:Ped Standalone disabled");
} else {
if (enablePedStandaloneData(1) < 0 || onDmp(1) < 0) {
LOGE("HAL:ERR can't enable Ped Standalone");
} else {
mFeatureActiveMask |= INV_DMP_PED_STANDALONE;
//Disable DMP Pedometer Interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.pedometer_int_on, getTimestamp());
if (write_sysfs_int(mpu.pedometer_int_on, 0) < 0) {
LOGE("HAL:ERR can't disable Android Pedometer Interrupt");
return (-1);
}
//Enable Data Interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, 0) < 0) {
LOGE("HAL:ERR can't enable DMP event interrupt");
return (-1);
}
LOGV_IF(ENG_VERBOSE, "HAL:Ped Standalone enabled");
}
}
return 0;
}
int MPLSensor:: enablePedStandaloneData(int en)
{
VFUNC_LOG;
int res = 0;
// Enable DMP Ped standalone
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.step_detector_on, getTimestamp());
if (write_sysfs_int(mpu.step_detector_on, en) < 0) {
LOGE("HAL:ERR can't write DMP step_detector_on");
res = -1; //Indicate an err
}
// Disable DMP Step indicator
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.step_indicator_on, getTimestamp());
if (write_sysfs_int(mpu.step_indicator_on, en) < 0) {
LOGE("HAL:ERR can't write DMP step_indicator_on");
res = -1; //Indicate an err
}
if (!en) {
LOGV_IF(ENG_VERBOSE, "HAL:Disabling ped standalone");
//Disable Accel if no sensor needs it
if (!(mFeatureActiveMask & DMP_FEATURE_MASK)
&& (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_ACCEL))) {
res = enableAccel(0);
if (res < 0)
return res;
}
if (!(mFeatureActiveMask & DMP_FEATURE_MASK)
&& (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_GYRO))) {
res = enableGyro(0);
if (res < 0)
return res;
}
} else {
LOGV_IF(ENG_VERBOSE, "HAL:Enabling ped standalone");
// enable accel engine
res = enableAccel(1);
if (res < 0)
return res;
LOGV_IF(EXTRA_VERBOSE, "mLocalSensorMask=0x%lx", mLocalSensorMask);
// disable accel FIFO
if (!((mLocalSensorMask & mMasterSensorMask) & INV_THREE_AXIS_ACCEL)) {
res = turnOffAccelFifo();
if (res < 0)
return res;
}
}
return res;
}
int MPLSensor::checkPedQuatEnabled(void)
{
VFUNC_LOG;
return ((mFeatureActiveMask & INV_DMP_PED_QUATERNION)? 1:0);
}
/* This feature is only used in batch mode */
/* Step Detector && Game Rotation Vector */
int MPLSensor::enablePedQuaternion(int en)
{
VFUNC_LOG;
if (!en) {
enablePedQuaternionData(0);
mFeatureActiveMask &= ~INV_DMP_PED_QUATERNION;
if (mFeatureActiveMask == 0) {
onDmp(0);
} else if(mFeatureActiveMask & INV_DMP_PEDOMETER) {
//Re-enable DMP Pedometer Interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
1, mpu.pedometer_int_on, getTimestamp());
if (write_sysfs_int(mpu.pedometer_int_on, 1) < 0) {
LOGE("HAL:ERR can't enable Android Pedometer Interrupt");
return (-1);
}
//Disable data interrupt if no continuous data
if (mEnabled == 0) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
1, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, en) < 0) {
LOGE("HAL:ERR can't enable DMP event interrupt");
return (-1);
}
}
}
LOGV_IF(ENG_VERBOSE, "HAL:Ped Quat disabled");
} else {
if (enablePedQuaternionData(1) < 0 || onDmp(1) < 0) {
LOGE("HAL:ERR can't enable Ped Quaternion");
} else {
mFeatureActiveMask |= INV_DMP_PED_QUATERNION;
//Disable DMP Pedometer Interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.pedometer_int_on, getTimestamp());
if (write_sysfs_int(mpu.pedometer_int_on, 0) < 0) {
LOGE("HAL:ERR can't disable Android Pedometer Interrupt");
return (-1);
}
//Enable Data Interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, 0) < 0) {
LOGE("HAL:ERR can't enable DMP event interrupt");
return (-1);
}
LOGV_IF(ENG_VERBOSE, "HAL:Ped Quat enabled");
}
}
return 0;
}
int MPLSensor::enablePedQuaternionData(int en)
{
VFUNC_LOG;
int res = 0;
// Enable DMP quaternion
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.ped_q_on, getTimestamp());
if (write_sysfs_int(mpu.ped_q_on, en) < 0) {
LOGE("HAL:ERR can't write DMP ped_q_on");
res = -1; //Indicate an err
}
// toggle DMP step indicator
/*LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.step_indicator_on, getTimestamp());
if (write_sysfs_int(mpu.step_indicator_on, en) < 0) {
LOGE("HAL:ERR can't write DMP step_indicator_on");
res = -1; //Indicate an err
}*/
if (!en) {
LOGV_IF(ENG_VERBOSE, "HAL:Disabling ped quat");
//Disable Accel if no sensor needs it
if (!(mFeatureActiveMask & DMP_FEATURE_MASK)
&& (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_ACCEL))) {
res = enableAccel(0);
if (res < 0)
return res;
}
if (!(mFeatureActiveMask & DMP_FEATURE_MASK)
&& (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_GYRO))) {
res = enableGyro(0);
if (res < 0)
return res;
}
if (mFeatureActiveMask & INV_DMP_QUATERNION) {
res = write_sysfs_int(mpu.gyro_fifo_enable, 1);
res += write_sysfs_int(mpu.accel_fifo_enable, 1);
if (res < 0)
return res;
}
//LOGV_IF(ENG_VERBOSE, "before mLocalSensorMask=0x%lx", mLocalSensorMask);
// reset global mask for buildMpuEvent()
if (mEnabled & (1 << GameRotationVector)) {
mLocalSensorMask |= INV_THREE_AXIS_GYRO;
mLocalSensorMask |= INV_THREE_AXIS_ACCEL;
} else if (mEnabled & (1 << Accelerometer)) {
mLocalSensorMask |= INV_THREE_AXIS_ACCEL;
} else if ((mEnabled & ( 1 << Gyro)) ||
(mEnabled & (1 << RawGyro))) {
mLocalSensorMask |= INV_THREE_AXIS_GYRO;
}
//LOGV_IF(ENG_VERBOSE, "after mLocalSensorMask=0x%lx", mLocalSensorMask);
} else {
LOGV_IF(PROCESS_VERBOSE, "HAL:Enabling ped quat");
// enable accel engine
res = enableAccel(1);
if (res < 0)
return res;
// enable gyro engine
res = enableGyro(1);
if (res < 0)
return res;
LOGV_IF(EXTRA_VERBOSE, "mLocalSensorMask=0x%lx", mLocalSensorMask);
// disable accel FIFO
if ((!((mLocalSensorMask & mMasterSensorMask) & INV_THREE_AXIS_ACCEL)) ||
!(mBatchEnabled & (1 << Accelerometer))) {
res = turnOffAccelFifo();
if (res < 0)
return res;
mLocalSensorMask &= ~INV_THREE_AXIS_ACCEL;
}
// disable gyro FIFO
if ((!((mLocalSensorMask & mMasterSensorMask) & INV_THREE_AXIS_GYRO)) ||
!((mBatchEnabled & (1 << Gyro)) || (mBatchEnabled & (1 << RawGyro)))) {
res = turnOffGyroFifo();
if (res < 0)
return res;
mLocalSensorMask &= ~INV_THREE_AXIS_GYRO;
}
}
return res;
}
int MPLSensor::check6AxisQuatEnabled(void)
{
VFUNC_LOG;
return ((mFeatureActiveMask & INV_DMP_6AXIS_QUATERNION)? 1:0);
}
/* This is used for batch mode only */
/* GRV is batched but not along with ped */
int MPLSensor::enable6AxisQuaternion(int en)
{
VFUNC_LOG;
if (!en) {
enable6AxisQuaternionData(0);
mFeatureActiveMask &= ~INV_DMP_6AXIS_QUATERNION;
if (mFeatureActiveMask == 0) {
onDmp(0);
}
LOGV_IF(ENG_VERBOSE, "HAL:6 Axis Quat disabled");
} else {
if (enable6AxisQuaternionData(1) < 0 || onDmp(1) < 0) {
LOGE("HAL:ERR can't enable 6 Axis Quaternion");
} else {
mFeatureActiveMask |= INV_DMP_6AXIS_QUATERNION;
LOGV_IF(PROCESS_VERBOSE, "HAL:6 Axis Quat enabled");
}
}
return 0;
}
int MPLSensor::enable6AxisQuaternionData(int en)
{
VFUNC_LOG;
int res = 0;
// Enable DMP quaternion
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.six_axis_q_on, getTimestamp());
if (write_sysfs_int(mpu.six_axis_q_on, en) < 0) {
LOGE("HAL:ERR can't write DMP six_axis_q_on");
res = -1; //Indicate an err
}
if (!en) {
LOGV_IF(EXTRA_VERBOSE, "HAL:DMP six axis quaternion data was turned off");
inv_quaternion_sensor_was_turned_off();
if (!(mFeatureActiveMask & DMP_FEATURE_MASK)
&& (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_ACCEL))) {
res = enableAccel(0);
if (res < 0)
return res;
}
if (!(mFeatureActiveMask & DMP_FEATURE_MASK)
&& (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_GYRO))) {
res = enableGyro(0);
if (res < 0)
return res;
}
if (mFeatureActiveMask & INV_DMP_QUATERNION) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
1, mpu.gyro_fifo_enable, getTimestamp());
res = write_sysfs_int(mpu.gyro_fifo_enable, 1);
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
1, mpu.accel_fifo_enable, getTimestamp());
res += write_sysfs_int(mpu.accel_fifo_enable, 1);
if (res < 0)
return res;
}
LOGV_IF(ENG_VERBOSE, " k=0x%lx", mLocalSensorMask);
// reset global mask for buildMpuEvent()
if (mEnabled & (1 << GameRotationVector)) {
if (!(mFeatureActiveMask & INV_DMP_PED_QUATERNION)) {
mLocalSensorMask |= INV_THREE_AXIS_GYRO;
mLocalSensorMask |= INV_THREE_AXIS_ACCEL;
res = write_sysfs_int(mpu.gyro_fifo_enable, 1);
res += write_sysfs_int(mpu.accel_fifo_enable, 1);
if (res < 0)
return res;
}
} else if (mEnabled & (1 << Accelerometer)) {
mLocalSensorMask |= INV_THREE_AXIS_ACCEL;
} else if ((mEnabled & ( 1 << Gyro)) ||
(mEnabled & (1 << RawGyro))) {
mLocalSensorMask |= INV_THREE_AXIS_GYRO;
}
LOGV_IF(ENG_VERBOSE, "after mLocalSensorMask=0x%lx", mLocalSensorMask);
} else {
LOGV_IF(PROCESS_VERBOSE, "HAL:Enabling six axis quat");
if (mEnabled & ( 1 << GameRotationVector)) {
// enable accel engine
res = enableAccel(1);
if (res < 0)
return res;
// enable gyro engine
res = enableGyro(1);
if (res < 0)
return res;
LOGV_IF(EXTRA_VERBOSE, "before: mLocalSensorMask=0x%lx", mLocalSensorMask);
if ((!(mLocalSensorMask & mMasterSensorMask & INV_THREE_AXIS_ACCEL)) ||
(!(mBatchEnabled & (1 << Accelerometer)) ||
(!(mEnabled & (1 << Accelerometer))))) {
res = turnOffAccelFifo();
if (res < 0)
return res;
mLocalSensorMask &= ~INV_THREE_AXIS_ACCEL;
}
if ((!(mLocalSensorMask & mMasterSensorMask & INV_THREE_AXIS_GYRO)) ||
(!(mBatchEnabled & (1 << Gyro)) ||
(!(mEnabled & (1 << Gyro))))) {
if (!(mBatchEnabled & (1 << RawGyro)) ||
(!(mEnabled & (1 << RawGyro)))) {
res = turnOffGyroFifo();
if (res < 0)
return res;
mLocalSensorMask &= ~INV_THREE_AXIS_GYRO;
}
}
LOGV_IF(ENG_VERBOSE, "after: mLocalSensorMask=0x%lx", mLocalSensorMask);
}
}
return res;
}
/* this is for batch mode only */
int MPLSensor::checkLPQRateSupported(void)
{
VFUNC_LOG;
return ((mDelays[GameRotationVector] <= RATE_200HZ) ? 0 :1);
}
int MPLSensor::checkLPQuaternion(void)
{
VFUNC_LOG;
return ((mFeatureActiveMask & INV_DMP_QUATERNION)? 1:0);
}
int MPLSensor::enableLPQuaternion(int en)
{
VFUNC_LOG;
if (!en) {
enableQuaternionData(0);
mFeatureActiveMask &= ~INV_DMP_QUATERNION;
if (mFeatureActiveMask == 0) {
onDmp(0);
}
LOGV_IF(ENG_VERBOSE, "HAL:LP Quat disabled");
} else {
if (enableQuaternionData(1) < 0 || onDmp(1) < 0) {
LOGE("HAL:ERR can't enable LP Quaternion");
} else {
mFeatureActiveMask |= INV_DMP_QUATERNION;
LOGV_IF(ENG_VERBOSE, "HAL:LP Quat enabled");
}
}
return 0;
}
int MPLSensor::enableQuaternionData(int en)
{
VFUNC_LOG;
int res = 0;
// Enable DMP quaternion
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.three_axis_q_on, getTimestamp());
if (write_sysfs_int(mpu.three_axis_q_on, en) < 0) {
LOGE("HAL:ERR can't write DMP three_axis_q__on");
res = -1; //Indicates an err
}
if (!en) {
LOGV_IF(ENG_VERBOSE, "HAL:DMP quaternion data was turned off");
inv_quaternion_sensor_was_turned_off();
} else {
LOGV_IF(ENG_VERBOSE, "HAL:Enabling three axis quat");
}
return res;
}
int MPLSensor::enableDmpPedometer(int en, int interruptMode)
{
VFUNC_LOG;
int res = 0;
int enabled_sensors = mEnabled;
if (isMpuNonDmp())
return res;
// reset master enable
res = masterEnable(0);
if (res < 0) {
return res;
}
if (en == 1) {
//Enable DMP Pedometer Function
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.pedometer_on, getTimestamp());
if (write_sysfs_int(mpu.pedometer_on, en) < 0) {
LOGE("HAL:ERR can't enable Android Pedometer");
res = -1; // indicate an err
return res;
}
if (interruptMode || (mFeatureActiveMask & INV_DMP_PEDOMETER)) {
//Enable DMP Pedometer Interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.pedometer_int_on, getTimestamp());
if (write_sysfs_int(mpu.pedometer_int_on, en) < 0) {
LOGE("HAL:ERR can't enable Android Pedometer Interrupt");
res = -1; // indicate an err
return res;
}
}
// enable DMP
res = onDmp(1);
if (res < 0) {
return res;
}
// set DMP rate to 200Hz
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
200, mpu.accel_fifo_rate, getTimestamp());
if (write_sysfs_int(mpu.accel_fifo_rate, 200) < 0) {
res = -1;
LOGE("HAL:ERR can't set rate to 200Hz");
return res;
}
// enable accel engine
res = enableAccel(1);
if (res < 0) {
return res;
}
// disable accel FIFO
if (!(mLocalSensorMask & mMasterSensorMask & INV_THREE_AXIS_ACCEL)) {
res = turnOffAccelFifo();
if (res < 0)
return res;
}
// disable data interrupt
//if (!batchPed && enabled_sensors == 0) {
if (enabled_sensors == 0) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, en) < 0) {
res = -1;
LOGE("HAL:ERR can't enable DMP event interrupt");
}
}
if (interruptMode) {
mFeatureActiveMask |= INV_DMP_PEDOMETER;
}
else {
mFeatureActiveMask |= INV_DMP_PEDOMETER_STEP;
mStepCountPollTime = 1000;
}
clock_gettime(CLOCK_MONOTONIC, &mt_pre);
} else {
if (interruptMode) {
mFeatureActiveMask &= ~INV_DMP_PEDOMETER;
}
else {
mFeatureActiveMask &= ~INV_DMP_PEDOMETER_STEP;
mStepCountPollTime = -1;
}
/* if neither step detector or step count is on */
if (!(mFeatureActiveMask & (INV_DMP_PEDOMETER | INV_DMP_PEDOMETER_STEP))) {
//Disable DMP Pedometer Function
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.pedometer_on, getTimestamp());
if (write_sysfs_int(mpu.pedometer_on, en) < 0) {
LOGE("HAL:ERR can't enable Android Pedometer");
res = -1; // indicate an err
return res;
}
}
if (mFeatureActiveMask == 0 ) {
// disable DMP
res = onDmp(0);
if (res < 0) {
return res;
}
// disable accel engine
if (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_ACCEL)) {
res = enableAccel(0);
if (res < 0) {
return res;
}
}
}
/* if feature is not step detector */
if (!(mFeatureActiveMask & INV_DMP_PEDOMETER)) {
//Disable DMP Pedometer Interrupt
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.pedometer_int_on, getTimestamp());
if (write_sysfs_int(mpu.pedometer_int_on, en) < 0) {
LOGE("HAL:ERR can't enable Android Pedometer Interrupt");
res = -1; // indicate an err
return res;
}
}
//enable data interrupts if applicable
if (enabled_sensors) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, en) < 0) {
res = -1;
LOGE("HAL:ERR can't enable DMP event interrupt");
}
}
}
if(en || enabled_sensors || mFeatureActiveMask) {
res = masterEnable(1);
}
return res;
}
int MPLSensor::masterEnable(int en)
{
VFUNC_LOG;
int res = 0;
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.master_enable, getTimestamp());
res = write_sysfs_int(mpu.master_enable, en);
return res;
}
int MPLSensor::enableGyro(int en)
{
VFUNC_LOG;
int res = 0;
/* need to also turn on/off the master enable */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.gyro_enable, getTimestamp());
res = write_sysfs_int(mpu.gyro_enable, en);
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.gyro_fifo_enable, getTimestamp());
res += write_sysfs_int(mpu.gyro_fifo_enable, en);
if (!en) {
LOGV_IF(EXTRA_VERBOSE, "HAL:MPL:inv_gyro_was_turned_off");
inv_gyro_was_turned_off();
}
return res;
}
int MPLSensor::enableLowPowerAccel(int en)
{
VFUNC_LOG;
int res;
/* need to also turn on/off the master enable */
res = write_sysfs_int(mpu.motion_lpa_on, en);
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.motion_lpa_on, getTimestamp());
return res;
}
int MPLSensor::enableAccel(int en)
{
VFUNC_LOG;
int res;
/* need to also turn on/off the master enable */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.accel_enable, getTimestamp());
res = write_sysfs_int(mpu.accel_enable, en);
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.accel_fifo_enable, getTimestamp());
res += write_sysfs_int(mpu.accel_fifo_enable, en);
if (!en) {
LOGV_IF(EXTRA_VERBOSE, "HAL:MPL:inv_accel_was_turned_off");
inv_accel_was_turned_off();
}
return res;
}
int MPLSensor::enableCompass(int en, int rawSensorRequested)
{
VFUNC_LOG;
int res = 0;
/* handle ID_RM if third party compass cal is used */
if (rawSensorRequested && mCompassSensor->providesCalibration()) {
res = mCompassSensor->enable(ID_RM, en);
} else {
res = mCompassSensor->enable(ID_M, en);
}
if (en == 0 || res != 0) {
LOGV_IF(EXTRA_VERBOSE, "HAL:MPL:inv_compass_was_turned_off %d", res);
inv_compass_was_turned_off();
}
return res;
}
int MPLSensor::enablePressure(int en)
{
VFUNC_LOG;
int res = 0;
if (mPressureSensor)
res = mPressureSensor->enable(ID_PS, en);
return res;
}
/* use this function for initialization */
int MPLSensor::enableBatch(int64_t timeout)
{
VFUNC_LOG;
int res = 0;
res = write_sysfs_int(mpu.batchmode_timeout, timeout);
if (timeout == 0) {
res = write_sysfs_int(mpu.six_axis_q_on, 0);
res = write_sysfs_int(mpu.ped_q_on, 0);
res = write_sysfs_int(mpu.step_detector_on, 0);
res = write_sysfs_int(mpu.step_indicator_on, 0);
}
if (timeout == 0) {
LOGV_IF(EXTRA_VERBOSE, "HAL:MPL:batchmode timeout is zero");
}
return res;
}
void MPLSensor::computeLocalSensorMask(int enabled_sensors)
{
VFUNC_LOG;
do {
/* Invensense Pressure on secondary bus */
if (PS_ENABLED) {
LOGV_IF(ENG_VERBOSE, "PS ENABLED");
mLocalSensorMask |= INV_ONE_AXIS_PRESSURE;
} else {
LOGV_IF(ENG_VERBOSE, "PS DISABLED");
mLocalSensorMask &= ~INV_ONE_AXIS_PRESSURE;
}
if (LA_ENABLED || GR_ENABLED || RV_ENABLED || O_ENABLED
|| (GRV_ENABLED && GMRV_ENABLED)) {
LOGV_IF(ENG_VERBOSE, "FUSION ENABLED");
mLocalSensorMask |= ALL_MPL_SENSORS_NP;
break;
}
if (GRV_ENABLED) {
if (!(mBatchEnabled & (1 << GameRotationVector))) {
LOGV_IF(ENG_VERBOSE, "6 Axis Fusion ENABLED");
mLocalSensorMask |= INV_THREE_AXIS_GYRO;
mLocalSensorMask |= INV_THREE_AXIS_ACCEL;
} else {
if (GY_ENABLED || RGY_ENABLED) {
LOGV_IF(ENG_VERBOSE, "G ENABLED");
mLocalSensorMask |= INV_THREE_AXIS_GYRO;
} else {
LOGV_IF(ENG_VERBOSE, "G DISABLED");
mLocalSensorMask &= ~INV_THREE_AXIS_GYRO;
}
if (A_ENABLED) {
LOGV_IF(ENG_VERBOSE, "A ENABLED");
mLocalSensorMask |= INV_THREE_AXIS_ACCEL;
} else {
LOGV_IF(ENG_VERBOSE, "A DISABLED");
mLocalSensorMask &= ~INV_THREE_AXIS_ACCEL;
}
}
/* takes care of MAG case */
if (M_ENABLED || RM_ENABLED) {
LOGV_IF(1, "M ENABLED");
mLocalSensorMask |= INV_THREE_AXIS_COMPASS;
} else {
LOGV_IF(1, "M DISABLED");
mLocalSensorMask &= ~INV_THREE_AXIS_COMPASS;
}
break;
}
if (GMRV_ENABLED) {
LOGV_IF(ENG_VERBOSE, "6 Axis Geomagnetic Fusion ENABLED");
mLocalSensorMask |= INV_THREE_AXIS_ACCEL;
mLocalSensorMask |= INV_THREE_AXIS_COMPASS;
/* takes care of Gyro case */
if (GY_ENABLED || RGY_ENABLED) {
LOGV_IF(1, "G ENABLED");
mLocalSensorMask |= INV_THREE_AXIS_GYRO;
} else {
LOGV_IF(1, "G DISABLED");
mLocalSensorMask &= ~INV_THREE_AXIS_GYRO;
}
break;
}
if(!A_ENABLED && !M_ENABLED && !RM_ENABLED &&
!GRV_ENABLED && !GMRV_ENABLED && !GY_ENABLED && !RGY_ENABLED &&
!PS_ENABLED) {
/* Invensense compass cal */
LOGV_IF(ENG_VERBOSE, "ALL DISABLED");
mLocalSensorMask = 0;
break;
}
if (GY_ENABLED || RGY_ENABLED) {
LOGV_IF(ENG_VERBOSE, "G ENABLED");
mLocalSensorMask |= INV_THREE_AXIS_GYRO;
} else {
LOGV_IF(ENG_VERBOSE, "G DISABLED");
mLocalSensorMask &= ~INV_THREE_AXIS_GYRO;
}
if (A_ENABLED) {
LOGV_IF(ENG_VERBOSE, "A ENABLED");
mLocalSensorMask |= INV_THREE_AXIS_ACCEL;
} else {
LOGV_IF(ENG_VERBOSE, "A DISABLED");
mLocalSensorMask &= ~INV_THREE_AXIS_ACCEL;
}
/* Invensense compass calibration */
if (M_ENABLED || RM_ENABLED) {
LOGV_IF(ENG_VERBOSE, "M ENABLED");
mLocalSensorMask |= INV_THREE_AXIS_COMPASS;
} else {
LOGV_IF(ENG_VERBOSE, "M DISABLED");
mLocalSensorMask &= ~INV_THREE_AXIS_COMPASS;
}
} while (0);
}
int MPLSensor::enableSensors(unsigned long sensors, int en, uint32_t changed)
{
VFUNC_LOG;
inv_error_t res = -1;
int on = 1;
int cal_stored = 0;
// Sequence to enable or disable a sensor
// 1. reset master enable (=0)
// 2. enable or disable a sensor
// 3. set master enable (=1)
if (isLowPowerQuatEnabled() ||
changed & ((1 << Gyro) | (1 << RawGyro) | (1 << Accelerometer) |
(mCompassSensor->isIntegrated() << MagneticField) |
(mCompassSensor->isIntegrated() << RawMagneticField) |
(mPressureSensor->isIntegrated() << Pressure))) {
/* reset master enable */
res = masterEnable(0);
if(res < 0) {
return res;
}
}
LOGV_IF(ENG_VERBOSE, "HAL:enableSensors - sensors: 0x%0x",
(unsigned int)sensors);
if (changed & ((1 << Gyro) | (1 << RawGyro))) {
LOGV_IF(ENG_VERBOSE, "HAL:enableSensors - gyro %s",
(sensors & INV_THREE_AXIS_GYRO? "enable": "disable"));
res = enableGyro(!!(sensors & INV_THREE_AXIS_GYRO));
if(res < 0) {
return res;
}
if (!cal_stored && (!en && (changed & (1 << Gyro)))) {
storeCalibration();
cal_stored = 1;
}
}
if (changed & (1 << Accelerometer)) {
LOGV_IF(ENG_VERBOSE, "HAL:enableSensors - accel %s",
(sensors & INV_THREE_AXIS_ACCEL? "enable": "disable"));
res = enableAccel(!!(sensors & INV_THREE_AXIS_ACCEL));
if(res < 0) {
return res;
}
if (!(sensors & INV_THREE_AXIS_ACCEL) && !cal_stored) {
storeCalibration();
cal_stored = 1;
}
}
if (changed & ((1 << MagneticField) | (1 << RawMagneticField))) {
LOGV_IF(ENG_VERBOSE, "HAL:enableSensors - compass %s",
(sensors & INV_THREE_AXIS_COMPASS? "enable": "disable"));
res = enableCompass(!!(sensors & INV_THREE_AXIS_COMPASS), changed & (1 << RawMagneticField));
if(res < 0) {
return res;
}
if (!cal_stored && (!en && (changed & (1 << MagneticField)))) {
storeCalibration();
cal_stored = 1;
}
}
if (changed & (1 << Pressure)) {
LOGV_IF(ENG_VERBOSE, "HAL:enableSensors - pressure %s",
(sensors & INV_ONE_AXIS_PRESSURE? "enable": "disable"));
res = enablePressure(!!(sensors & INV_ONE_AXIS_PRESSURE));
if(res < 0) {
return res;
}
}
if (isLowPowerQuatEnabled()) {
// Enable LP Quat
if ((mEnabled & VIRTUAL_SENSOR_9AXES_MASK)
|| (mEnabled & VIRTUAL_SENSOR_GYRO_6AXES_MASK)) {
LOGV_IF(ENG_VERBOSE, "HAL: 9 axis or game rot enabled");
if (!(changed & ((1 << Gyro)
| (1 << RawGyro)
| (1 << Accelerometer)
| (mCompassSensor->isIntegrated() << MagneticField)
| (mCompassSensor->isIntegrated() << RawMagneticField)))
) {
/* reset master enable */
res = masterEnable(0);
if(res < 0) {
return res;
}
}
if (!checkLPQuaternion()) {
enableLPQuaternion(1);
} else {
LOGV_IF(ENG_VERBOSE, "HAL:LP Quat already enabled");
}
} else if (checkLPQuaternion()) {
enableLPQuaternion(0);
}
}
/* apply accel/gyro bias to DMP bias */
/* precondition: masterEnable(0), mGyroBiasAvailable=true */
/* postcondition: bias is applied upon masterEnable(1) */
if(!(sensors & INV_THREE_AXIS_GYRO)) {
setGyroBias();
}
if(!(sensors & INV_THREE_AXIS_ACCEL)) {
setAccelBias();
}
/* to batch or not to batch */
int batchMode = computeBatchSensorMask(mEnabled, mBatchEnabled);
/* skip setBatch if there is no need to */
if(((int)mOldBatchEnabledMask != batchMode) || batchMode) {
setBatch(batchMode,1);
}
mOldBatchEnabledMask = batchMode;
if (changed & ((1 << Gyro) | (1 << RawGyro) | (1 << Accelerometer) |
(mCompassSensor->isIntegrated() << MagneticField) |
(mCompassSensor->isIntegrated() << RawMagneticField) |
(mPressureSensor->isIntegrated() << Pressure))) {
LOGV_IF(ENG_VERBOSE,
"HAL DEBUG: Gyro, Accel, Compass, Pressure changes");
if ((checkSmdSupport() == 1) || (checkPedometerSupport() == 1) || (sensors &
(INV_THREE_AXIS_GYRO
| INV_THREE_AXIS_ACCEL
| (INV_THREE_AXIS_COMPASS * mCompassSensor->isIntegrated())
| (INV_ONE_AXIS_PRESSURE * mPressureSensor->isIntegrated())))) {
LOGV_IF(ENG_VERBOSE, "SMD or Hardware sensors enabled");
LOGV_IF(ENG_VERBOSE,
"mFeatureActiveMask=%016llx", mFeatureActiveMask);
if (mFeatureActiveMask & DMP_FEATURE_MASK) {
LOGV_IF(ENG_VERBOSE, "HAL DEBUG: LPQ, SMD, SO enabled");
// disable DMP event interrupt only (w/ data interrupt)
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, 0) < 0) {
res = -1;
LOGE("HAL:ERR can't disable DMP event interrupt");
return res;
}
}
LOGV_IF(ENG_VERBOSE, "mFeatureActiveMask=%lld", mFeatureActiveMask);
LOGV_IF(ENG_VERBOSE, "DMP_FEATURE_MASK=%d", DMP_FEATURE_MASK);
if ((mFeatureActiveMask & (long long)DMP_FEATURE_MASK) &&
(!(mFeatureActiveMask & INV_DMP_6AXIS_QUATERNION) ||
!(mFeatureActiveMask & INV_DMP_PED_STANDALONE) ||
!(mFeatureActiveMask & INV_DMP_PED_QUATERNION))) {
// enable DMP
onDmp(1);
res = enableAccel(on);
if(res < 0) {
return res;
}
LOGV_IF(ENG_VERBOSE, "mLocalSensorMask=0x%lx", mLocalSensorMask);
if (((sensors | mLocalSensorMask) & INV_THREE_AXIS_ACCEL) == 0) {
res = turnOffAccelFifo();
}
if(res < 0) {
return res;
}
}
res = masterEnable(1);
if(res < 0) {
return res;
}
} else { // all sensors idle -> reduce power
LOGV_IF(ENG_VERBOSE, "HAL DEBUG: not SMD or Hardware sensors");
if (isDmpDisplayOrientationOn()
&& (mDmpOrientationEnabled
|| !isDmpScreenAutoRotationEnabled())) {
enableDmpOrientation(1);
}
if (!cal_stored) {
storeCalibration();
cal_stored = 1;
}
}
} else if ((changed &
((!mCompassSensor->isIntegrated()) << MagneticField) ||
((!mCompassSensor->isIntegrated()) << RawMagneticField))
&&
!(sensors & (INV_THREE_AXIS_GYRO | INV_THREE_AXIS_ACCEL
| (INV_THREE_AXIS_COMPASS * (!mCompassSensor->isIntegrated()))))
) {
LOGV_IF(ENG_VERBOSE, "HAL DEBUG: Gyro, Accel, Compass no change");
if (!cal_stored) {
storeCalibration();
cal_stored = 1;
}
} else {
LOGV_IF(ENG_VERBOSE, "HAL DEBUG: mEnabled");
if (sensors &
(INV_THREE_AXIS_GYRO
| INV_THREE_AXIS_ACCEL
| (INV_THREE_AXIS_COMPASS * mCompassSensor->isIntegrated()))) {
res = masterEnable(1);
if(res < 0)
return res;
}
}
return res;
}
/* check if batch mode should be turned on or not */
int MPLSensor::computeBatchSensorMask(int enableSensors, int tempBatchSensor)
{
VFUNC_LOG;
int batchMode = 1;
mFeatureActiveMask &= ~INV_DMP_BATCH_MODE;
LOGV_IF(ENG_VERBOSE,
"HAL:computeBatchSensorMask: enableSensors=%d tempBatchSensor=%d",
enableSensors, tempBatchSensor);
// handle initialization case
if (enableSensors == 0 && tempBatchSensor == 0)
return 0;
// check for possible continuous data mode
for(int i = 0; i <= Pressure; i++) {
if ((enableSensors & (1 << i)) && !(tempBatchSensor & (1 << i))) {
LOGV_IF(ENG_VERBOSE, "HAL:computeBatchSensorMask: "
"hardware sensor on continuous mode:%d", i);
// if any one of the hardware sensor is in continuous data mode
// turn off batch mode.
return 0;
}
if ((enableSensors & (1 << i)) && (tempBatchSensor & (1 << i))) {
LOGV_IF(ENG_VERBOSE,
"HAL:computeBatchSensorMask: hardware sensor is batch:%d",
i);
// if hardware sensor is batched, check if virtual sensor is batched
if ((enableSensors & (1 << GameRotationVector))
&& !(tempBatchSensor & (1 << GameRotationVector))) {
LOGV_IF(ENG_VERBOSE,
"HAL:computeBatchSensorMask: but virtual sensor is not:%d",
i);
return 0;
}
}
}
for(int i = Orientation; i <= GeomagneticRotationVector; i++) {
if ((enableSensors & (1 << i)) && !(tempBatchSensor & (1 << i))) {
LOGV_IF(ENG_VERBOSE, "HAL:computeBatchSensorMask: "
"composite sensor on continuous mode:%d", i);
// if composite sensors are on but not batched
// turn off batch mode.
return 0;
}
}
if ((mFeatureActiveMask & INV_DMP_PEDOMETER) && !(tempBatchSensor & (1 << StepDetector))) {
LOGV("HAL:computeBatchSensorMask: step detector on continuous mode.");
return 0;
}
mFeatureActiveMask |= INV_DMP_BATCH_MODE;
LOGV_IF(EXTRA_VERBOSE,
"HAL:computeBatchSensorMask: batchMode=%d, mBatchEnabled=%0x",
batchMode, tempBatchSensor);
return (batchMode && tempBatchSensor);
}
/* This function is called by enable() */
int MPLSensor::setBatch(int en, int toggleEnable)
{
VFUNC_LOG;
int res = 0;
int timeoutInMs = 0;
int featureMask = computeBatchDataOutput();
// reset master enable
res = masterEnable(0);
if (res < 0) {
return res;
}
if (en) {
/* take the minimum batchmode timeout */
int64_t timeout = 100000000000LL;
int64_t ns;
for (int i = 0; i < NumSensors; i++) {
LOGV_IF(0, "mFeatureActiveMask=0x%016llx, mEnabled=0x%01x, mBatchEnabled=0x%x",
mFeatureActiveMask, mEnabled, mBatchEnabled);
if (((mEnabled & (1 << i)) && (mBatchEnabled & (1 << i))) ||
(((featureMask & INV_DMP_PED_STANDALONE) && (mBatchEnabled & (1 << StepDetector))))) {
LOGV_IF(ENG_VERBOSE, "sensor=%d, timeout=%lld", i, mBatchTimeouts[i]);
ns = mBatchTimeouts[i];
timeout = (ns < timeout) ? ns : timeout;
}
}
/* Convert ns to millisecond */
timeoutInMs = timeout / 1000000;
} else {
timeoutInMs = 0;
}
LOGV_IF(ENG_VERBOSE, "HAL: batch timeout set to %dms", timeoutInMs);
/* step detector is enabled and */
/* batch mode is standalone */
if (en && (mFeatureActiveMask & INV_DMP_PEDOMETER) &&
(featureMask & INV_DMP_PED_STANDALONE)) {
LOGV_IF(ENG_VERBOSE, "ID_P only = 0x%x", mBatchEnabled);
enablePedStandalone(1);
} else {
enablePedStandalone(0);
}
/* step detector and GRV are enabled and */
/* batch mode is ped q */
if (en && (mFeatureActiveMask & INV_DMP_PEDOMETER) &&
(mEnabled & (1 << GameRotationVector)) &&
(featureMask & INV_DMP_PED_QUATERNION)) {
LOGV_IF(ENG_VERBOSE, "ID_P and GRV or ALL = 0x%x", mBatchEnabled);
LOGV_IF(ENG_VERBOSE, "ID_P is enabled for batching, "
"PED quat will be automatically enabled");
enableLPQuaternion(0);
enablePedQuaternion(1);
} else if (!(featureMask & INV_DMP_PED_STANDALONE)){
enablePedQuaternion(0);
}
/* step detector and hardware sensors enabled */
if (en && (featureMask & INV_DMP_PED_INDICATOR) &&
((mEnabled) ||
(mFeatureActiveMask & INV_DMP_PED_STANDALONE))) {
enablePedIndicator(1);
} else {
enablePedIndicator(0);
}
/* GRV is enabled and */
/* batch mode is 6axis q */
if (en && (mEnabled & (1 << GameRotationVector)) &&
(featureMask & INV_DMP_6AXIS_QUATERNION)) {
LOGV_IF(ENG_VERBOSE, "GRV = 0x%x", mBatchEnabled);
enableLPQuaternion(0);
enable6AxisQuaternion(1);
setInitial6QuatValue();
} else if (!(featureMask & INV_DMP_PED_QUATERNION)){
LOGV_IF(ENG_VERBOSE, "Toggle back to normal 6 axis");
if (mEnabled & (1 << GameRotationVector) && checkLPQRateSupported()) {
enableLPQuaternion(1);
}
enable6AxisQuaternion(0);
}
/* write required timeout to sysfs */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
timeoutInMs, mpu.batchmode_timeout, getTimestamp());
if (write_sysfs_int(mpu.batchmode_timeout, timeoutInMs) < 0) {
LOGE("HAL:ERR can't write batchmode_timeout");
}
if (en) {
// enable DMP
res = onDmp(1);
if (res < 0) {
return res;
}
// set batch rates
if (setBatchDataRates() < 0) {
LOGE("HAL:ERR can't set batch data rates");
}
// default fifo rate to 200Hz
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
200, mpu.gyro_fifo_rate, getTimestamp());
if (write_sysfs_int(mpu.gyro_fifo_rate, 200) < 0) {
res = -1;
LOGE("HAL:ERR can't set rate to 200Hz");
return res;
}
} else {
if (mFeatureActiveMask == 0) {
// disable DMP
res = onDmp(0);
if (res < 0) {
return res;
}
/* reset sensor rate */
if (resetDataRates() < 0) {
LOGE("HAL:ERR can't reset output rate back to original setting");
}
}
/* reset sensor rate */
/*if (resetDataRates() < 0) {
LOGE("HAL:ERR can't reset output rate back to original setting");
}*/
}
if (toggleEnable == 1) {
if (mFeatureActiveMask || mEnabled)
masterEnable(1);
}
return res;
}
/* Store calibration file */
void MPLSensor::storeCalibration(void)
{
VFUNC_LOG;
if(mHaveGoodMpuCal == true
|| mAccelAccuracy >= 2
|| mCompassAccuracy >= 3) {
int res = inv_store_calibration();
if (res) {
LOGE("HAL:Cannot store calibration on file");
} else {
LOGV_IF(PROCESS_VERBOSE, "HAL:Cal file updated");
}
}
}
void MPLSensor::cbProcData(void)
{
VFUNC_LOG;
mNewData = 1;
mSampleCount++;
LOGV_IF(EXTRA_VERBOSE, "HAL:new data");
}
/* these handlers transform mpl data into one of the Android sensor types */
int MPLSensor::gyroHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update;
update = inv_get_sensor_type_gyroscope(s->gyro.v, &s->gyro.status,
&s->timestamp);
LOGV_IF(HANDLER_DATA, "HAL:gyro data : %+f %+f %+f -- %lld - %d",
s->gyro.v[0], s->gyro.v[1], s->gyro.v[2], s->timestamp, update);
return update;
}
int MPLSensor::rawGyroHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update;
update = inv_get_sensor_type_gyroscope_raw(s->uncalibrated_gyro.uncalib,
&s->gyro.status, &s->timestamp);
if(update) {
memcpy(s->uncalibrated_gyro.bias, mGyroBias, sizeof(mGyroBias));
LOGV_IF(HANDLER_DATA,"HAL:gyro bias data : %+f %+f %+f -- %lld - %d",
s->uncalibrated_gyro.bias[0], s->uncalibrated_gyro.bias[1],
s->uncalibrated_gyro.bias[2], s->timestamp, update);
}
s->gyro.status = SENSOR_STATUS_UNRELIABLE;
LOGV_IF(HANDLER_DATA, "HAL:raw gyro data : %+f %+f %+f -- %lld - %d",
s->uncalibrated_gyro.uncalib[0], s->uncalibrated_gyro.uncalib[1],
s->uncalibrated_gyro.uncalib[2], s->timestamp, update);
return update;
}
int MPLSensor::accelHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update;
update = inv_get_sensor_type_accelerometer(
s->acceleration.v, &s->acceleration.status, &s->timestamp);
LOGV_IF(HANDLER_DATA, "HAL:accel data : %+f %+f %+f -- %lld - %d",
s->acceleration.v[0], s->acceleration.v[1], s->acceleration.v[2],
s->timestamp, update);
mAccelAccuracy = s->acceleration.status;
return update;
}
int MPLSensor::compassHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update;
update = inv_get_sensor_type_magnetic_field(
s->magnetic.v, &s->magnetic.status, &s->timestamp);
LOGV_IF(HANDLER_DATA, "HAL:compass data: %+f %+f %+f -- %lld - %d",
s->magnetic.v[0], s->magnetic.v[1], s->magnetic.v[2],
s->timestamp, update);
mCompassAccuracy = s->magnetic.status;
return update;
}
int MPLSensor::rawCompassHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update;
//TODO: need to handle uncalib data and bias for 3rd party compass
if(mCompassSensor->providesCalibration()) {
update = mCompassSensor->readRawSample(s->uncalibrated_magnetic.uncalib, &s->timestamp);
}
else {
update = inv_get_sensor_type_magnetic_field_raw(s->uncalibrated_magnetic.uncalib,
&s->magnetic.status, &s->timestamp);
}
if(update) {
memcpy(s->uncalibrated_magnetic.bias, mCompassBias, sizeof(mCompassBias));
LOGV_IF(HANDLER_DATA, "HAL:compass bias data: %+f %+f %+f -- %lld - %d",
s->uncalibrated_magnetic.bias[0], s->uncalibrated_magnetic.bias[1],
s->uncalibrated_magnetic.bias[2], s->timestamp, update);
}
s->magnetic.status = SENSOR_STATUS_UNRELIABLE;
LOGV_IF(HANDLER_DATA, "HAL:compass raw data: %+f %+f %+f %d -- %lld - %d",
s->uncalibrated_magnetic.uncalib[0], s->uncalibrated_magnetic.uncalib[1],
s->uncalibrated_magnetic.uncalib[2], s->magnetic.status, s->timestamp, update);
return update;
}
/*
Rotation Vector handler.
NOTE: rotation vector does not have an accuracy or status
*/
int MPLSensor::rvHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int8_t status;
int update;
update = inv_get_sensor_type_rotation_vector(s->data, &status,
&s->timestamp);
update |= isCompassDisabled();
LOGV_IF(HANDLER_DATA, "HAL:rv data: %+f %+f %+f %+f %+f- %+lld - %d",
s->data[0], s->data[1], s->data[2], s->data[3], s->data[4], s->timestamp,
update);
return update;
}
/*
Game Rotation Vector handler.
NOTE: rotation vector does not have an accuracy or status
*/
int MPLSensor::grvHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int8_t status;
int update;
update = inv_get_sensor_type_rotation_vector_6_axis(s->data, &status,
&s->timestamp);
/*hack*/
/*s->data[0] = mCached6AxisQuaternionData[0];
s->data[1] = mCached6AxisQuaternionData[1];
s->data[2] = mCached6AxisQuaternionData[2];
update = 1;*/
LOGV_IF(HANDLER_DATA, "HAL:grv data: %+f %+f %+f %+f %+f - %+lld - %d",
s->data[0], s->data[1], s->data[2], s->data[3], s->data[4], s->timestamp,
update);
return update;
}
int MPLSensor::laHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update;
update = inv_get_sensor_type_linear_acceleration(
s->gyro.v, &s->gyro.status, &s->timestamp);
update |= isCompassDisabled();
LOGV_IF(HANDLER_DATA, "HAL:la data: %+f %+f %+f - %lld - %d",
s->gyro.v[0], s->gyro.v[1], s->gyro.v[2], s->timestamp, update);
return update;
}
int MPLSensor::gravHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update;
update = inv_get_sensor_type_gravity(s->gyro.v, &s->gyro.status,
&s->timestamp);
update |= isCompassDisabled();
LOGV_IF(HANDLER_DATA, "HAL:gr data: %+f %+f %+f - %lld - %d",
s->gyro.v[0], s->gyro.v[1], s->gyro.v[2], s->timestamp, update);
return update;
}
int MPLSensor::orienHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update;
update = inv_get_sensor_type_orientation(
s->orientation.v, &s->orientation.status, &s->timestamp);
update |= isCompassDisabled();
LOGV_IF(HANDLER_DATA, "HAL:or data: %f %f %f - %lld - %d",
s->orientation.v[0], s->orientation.v[1], s->orientation.v[2],
s->timestamp, update);
return update;
}
int MPLSensor::smHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update = 1;
/* When event is triggered, set data to 1 */
s->data[0] = 1.f;
s->data[1] = 0.f;
s->data[2] = 0.f;
s->acceleration.status
= SENSOR_STATUS_UNRELIABLE;
/* Capture timestamp in HAL */
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts);
s->timestamp = (int64_t) ts.tv_sec * 1000000000 + ts.tv_nsec;
/* Identify which sensor this event is for */
s->version = sizeof(sensors_event_t);
s->sensor = ID_SM;
s->type = SENSOR_TYPE_SIGNIFICANT_MOTION;
LOGV_IF(HANDLER_DATA, "HAL:sm data: %f - %lld - %d",
s->data[0], s->timestamp, update);
return update;
}
int MPLSensor::scHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update = 0;
//update = readDmpPedometerEvents(s, 1);
LOGV_IF(HANDLER_DATA, "HAL:sc data: %f - %lld - %d",
s->data[0], s->timestamp, update);
return update < 1 ? 0 :1;
}
int MPLSensor::gmHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int8_t status;
int update = 0;
update = inv_get_sensor_type_geomagnetic_rotation_vector(s->data, &status,
&s->timestamp);
LOGV_IF(HANDLER_DATA, "HAL:gm data: %+f %+f %+f %+f %+f- %+lld - %d",
s->data[0], s->data[1], s->data[2], s->data[3], s->data[4], s->timestamp, update);
return update < 1 ? 0 :1;
}
int MPLSensor::psHandler(sensors_event_t* s)
{
VHANDLER_LOG;
int update = 0;
s->pressure = mCachedPressureData / 100.f; //hpa (millibar)
s->data[1] = 0;
s->data[2] = 0;
s->timestamp = mPressureTimestamp;
s->magnetic.status = 0;
update = mPressureUpdate;
mPressureUpdate = 0;
LOGV_IF(HANDLER_DATA, "HAL:ps data: %+f %+f %+f %+f- %+lld - %d",
s->data[0], s->data[1], s->data[2], s->data[3], s->timestamp, update);
return update < 1 ? 0 :1;
}
int MPLSensor::metaHandler(sensors_event_t* s, int flags)
{
VHANDLER_LOG;
int update = 0;
/* initalize SENSOR_TYPE_META_DATA */
s->version = 0;
s->sensor = 0;
s->reserved0 = 0;
s->timestamp = 0LL;
switch(flags) {
case META_DATA_FLUSH_COMPLETE:
update = mFlushBatchSet;
s->type = SENSOR_TYPE_META_DATA;
s->meta_data.what = flags;
s->meta_data.sensor = mFlushEnabled;
mFlushBatchSet = 0;
mFlushEnabled = -1;
LOGV_IF(HANDLER_DATA,
"HAL:flush complete data: type=%d what=%d, "
"sensor=%d - %lld - %d",
s->type, s->meta_data.what, s->meta_data.sensor,
s->timestamp, update);
break;
default:
LOGW("HAL: Meta flags not supported");
break;
}
return update;
}
int MPLSensor::enable(int32_t handle, int en)
{
VFUNC_LOG;
android::String8 sname;
int what = -1, err = 0;
int batchMode = 0;
switch (handle) {
case ID_SC:
what = StepCounter;
sname = "Step Counter";
LOGV_IF(PROCESS_VERBOSE, "HAL:enable - sensor %s (handle %d) %s -> %s",
sname.string(), handle,
(mDmpStepCountEnabled? "en": "dis"),
(en? "en" : "dis"));
enableDmpPedometer(en, 0);
mDmpStepCountEnabled = !!en;
return 0;
case ID_P:
sname = "StepDetector";
LOGV_IF(PROCESS_VERBOSE, "HAL:enable - sensor %s (handle %d) %s -> %s",
sname.string(), handle,
(mDmpPedometerEnabled? "en": "dis"),
(en? "en" : "dis"));
enableDmpPedometer(en, 1);
mDmpPedometerEnabled = !!en;
batchMode = computeBatchSensorMask(mEnabled, mBatchEnabled);
/* skip setBatch if there is no need to */
if(((int)mOldBatchEnabledMask != batchMode) || batchMode) {
setBatch(batchMode,1);
}
mOldBatchEnabledMask = batchMode;
return 0;
case ID_SM:
sname = "Significant Motion";
LOGV_IF(PROCESS_VERBOSE, "HAL:enable - sensor %s (handle %d) %s -> %s",
sname.string(), handle,
(mDmpSignificantMotionEnabled? "en": "dis"),
(en? "en" : "dis"));
enableDmpSignificantMotion(en);
mDmpSignificantMotionEnabled = !!en;
return 0;
case ID_SO:
sname = "Screen Orientation";
LOGV_IF(PROCESS_VERBOSE, "HAL:enable - sensor %s (handle %d) %s -> %s",
sname.string(), handle,
(mDmpOrientationEnabled? "en": "dis"),
(en? "en" : "dis"));
enableDmpOrientation(en && isDmpDisplayOrientationOn());
mDmpOrientationEnabled = !!en;
return 0;
case ID_A:
what = Accelerometer;
sname = "Accelerometer";
break;
case ID_M:
what = MagneticField;
sname = "MagneticField";
break;
case ID_RM:
what = RawMagneticField;
sname = "MagneticField Uncalibrated";
break;
case ID_O:
what = Orientation;
sname = "Orientation";
break;
case ID_GY:
what = Gyro;
sname = "Gyro";
break;
case ID_RG:
what = RawGyro;
sname = "Gyro Uncalibrated";
break;
case ID_GR:
what = Gravity;
sname = "Gravity";
break;
case ID_RV:
what = RotationVector;
sname = "RotationVector";
break;
case ID_GRV:
what = GameRotationVector;
sname = "GameRotationVector";
break;
case ID_LA:
what = LinearAccel;
sname = "LinearAccel";
break;
case ID_GMRV:
what = GeomagneticRotationVector;
sname = "GeomagneticRotationVector";
break;
case ID_PS:
what = Pressure;
sname = "Pressure";
break;
default: //this takes care of all the gestures
what = handle;
sname = "Others";
break;
}
if (uint32_t(what) >= NumSensors)
return -EINVAL;
int newState = en ? 1 : 0;
unsigned long sen_mask;
LOGV_IF(PROCESS_VERBOSE, "HAL:enable - sensor %s (handle %d) %s -> %s",
sname.string(), handle,
((mEnabled & (1 << what)) ? "en" : "dis"),
((uint32_t(newState) << what) ? "en" : "dis"));
LOGV_IF(ENG_VERBOSE,
"HAL:%s sensor state change what=%d", sname.string(), what);
// pthread_mutex_lock(&mMplMutex);
// pthread_mutex_lock(&mHALMutex);
if ((uint32_t(newState) << what) != (mEnabled & (1 << what))) {
short flags = newState;
uint32_t lastEnabled = mEnabled, changed = 0;
mEnabled &= ~(1 << what);
mEnabled |= (uint32_t(flags) << what);
LOGV_IF(ENG_VERBOSE, "HAL:handle = %d", handle);
LOGV_IF(ENG_VERBOSE, "HAL:flags = %d", flags);
computeLocalSensorMask(mEnabled);
LOGV_IF(ENG_VERBOSE, "HAL:enable : mEnabled = %d", mEnabled);
LOGV_IF(ENG_VERBOSE, "HAL:last enable : lastEnabled = %d", lastEnabled);
sen_mask = mLocalSensorMask & mMasterSensorMask;
mSensorMask = sen_mask;
LOGV_IF(ENG_VERBOSE, "HAL:sen_mask= 0x%0lx", sen_mask);
switch (what) {
case Gyro:
case RawGyro:
case Accelerometer:
if ((!(mEnabled & VIRTUAL_SENSOR_GYRO_6AXES_MASK) &&
!(mEnabled & VIRTUAL_SENSOR_9AXES_MASK)) &&
((lastEnabled & (1 << what)) != (mEnabled & (1 << what)))) {
changed |= (1 << what);
}
if (mFeatureActiveMask & INV_DMP_6AXIS_QUATERNION) {
changed |= (1 << what);
}
break;
case MagneticField:
case RawMagneticField:
if (!(mEnabled & VIRTUAL_SENSOR_9AXES_MASK) &&
((lastEnabled & (1 << what)) != (mEnabled & (1 << what)))) {
changed |= (1 << what);
}
break;
case Pressure:
if ((lastEnabled & (1 << what)) != (mEnabled & (1 << what))) {
changed |= (1 << what);
}
break;
case GameRotationVector:
if (!en)
storeCalibration();
if ((en && !(lastEnabled & VIRTUAL_SENSOR_ALL_MASK))
||
(en && !(lastEnabled & VIRTUAL_SENSOR_9AXES_MASK))
||
(!en && !(mEnabled & VIRTUAL_SENSOR_ALL_MASK))
||
(!en && (mEnabled & VIRTUAL_SENSOR_MAG_6AXES_MASK))) {
for (int i = Gyro; i <= RawMagneticField; i++) {
if (!(mEnabled & (1 << i))) {
changed |= (1 << i);
}
}
}
break;
case Orientation:
case RotationVector:
case LinearAccel:
case Gravity:
if (!en)
storeCalibration();
if ((en && !(lastEnabled & VIRTUAL_SENSOR_9AXES_MASK))
||
(!en && !(mEnabled & VIRTUAL_SENSOR_9AXES_MASK))) {
for (int i = Gyro; i <= RawMagneticField; i++) {
if (!(mEnabled & (1 << i))) {
changed |= (1 << i);
}
}
}
break;
case GeomagneticRotationVector:
if (!en)
storeCalibration();
if ((en && !(lastEnabled & VIRTUAL_SENSOR_ALL_MASK))
||
(en && !(lastEnabled & VIRTUAL_SENSOR_9AXES_MASK))
||
(!en && !(mEnabled & VIRTUAL_SENSOR_ALL_MASK))
||
(!en && (mEnabled & VIRTUAL_SENSOR_GYRO_6AXES_MASK))) {
for (int i = Accelerometer; i <= RawMagneticField; i++) {
if (!(mEnabled & (1<<i))) {
changed |= (1 << i);
}
}
}
break;
}
LOGV_IF(ENG_VERBOSE, "HAL:changed = %d", changed);
enableSensors(sen_mask, flags, changed);
}
// pthread_mutex_unlock(&mMplMutex);
// pthread_mutex_unlock(&mHALMutex);
#ifdef INV_PLAYBACK_DBG
/* apparently the logging needs to go through this sequence
to properly flush the log file */
inv_turn_off_data_logging();
if (fclose(logfile) < 0) {
LOGE("cannot close debug log file");
}
logfile = fopen("/data/playback.bin", "ab");
if (logfile)
inv_turn_on_data_logging(logfile);
#endif
return err;
}
void MPLSensor::getHandle(int32_t handle, int &what, android::String8 &sname)
{
VFUNC_LOG;
what = -1;
switch (handle) {
case ID_P:
what = StepDetector;
sname = "StepDetector";
break;
case ID_SC:
what = StepCounter;
sname = "StepCounter";
break;
case ID_SM:
what = SignificantMotion;
sname = "SignificantMotion";
break;
case ID_SO:
what = handle;
sname = "ScreenOrienation";
case ID_A:
what = Accelerometer;
sname = "Accelerometer";
break;
case ID_M:
what = MagneticField;
sname = "MagneticField";
break;
case ID_RM:
what = RawMagneticField;
sname = "MagneticField Uncalibrated";
break;
case ID_O:
what = Orientation;
sname = "Orientation";
break;
case ID_GY:
what = Gyro;
sname = "Gyro";
break;
case ID_RG:
what = RawGyro;
sname = "Gyro Uncalibrated";
break;
case ID_GR:
what = Gravity;
sname = "Gravity";
break;
case ID_RV:
what = RotationVector;
sname = "RotationVector";
break;
case ID_GRV:
what = GameRotationVector;
sname = "GameRotationVector";
break;
case ID_LA:
what = LinearAccel;
sname = "LinearAccel";
break;
case ID_PS:
what = Pressure;
sname = "Pressure";
break;
default: // this takes care of all the gestures
what = handle;
sname = "Others";
break;
}
LOGI_IF(EXTRA_VERBOSE, "HAL:getHandle - what=%d, sname=%s", what, sname.string());
return;
}
int MPLSensor::setDelay(int32_t handle, int64_t ns)
{
VFUNC_LOG;
android::String8 sname;
int what = -1;
#if 0
// skip the 1st call for enalbing sensors called by ICS/JB sensor service
static int counter_delay = 0;
if (!(mEnabled & (1 << what))) {
counter_delay = 0;
} else {
if (++counter_delay == 1) {
return 0;
}
else {
counter_delay = 0;
}
}
#endif
getHandle(handle, what, sname);
if (uint32_t(what) >= NumSensors)
return -EINVAL;
if (ns < 0)
return -EINVAL;
LOGV_IF(PROCESS_VERBOSE,
"setDelay : %llu ns, (%.2f Hz)", ns, 1000000000.f / ns);
// limit all rates to reasonable ones */
if (ns < 5000000LL) {
ns = 5000000LL;
}
/* store request rate to mDelays arrary for each sensor */
int64_t previousDelay = mDelays[what];
mDelays[what] = ns;
LOGV_IF(ENG_VERBOSE, "storing mDelays[%d] = %lld, previousDelay = %lld", what, ns, previousDelay);
switch (what) {
case ID_SC:
/* set limits of delivery rate of events */
mStepCountPollTime = ns;
LOGV_IF(ENG_VERBOSE, "step count rate =%lld ns", ns);
break;
case ID_P:
case SignificantMotion:
case ID_SO:
update_delay();
break;
case Gyro:
case RawGyro:
case Accelerometer:
// need to update delay since they are different
// resetDataRates was called earlier
//LOGV("what=%d mEnabled=%d mDelays[%d]=%lld previousDelay=%lld",
//what, mEnabled, what, mDelays[what], previousDelay);
if ((mEnabled & (1 << what)) && (previousDelay != mDelays[what])) {
LOGV_IF(ENG_VERBOSE,
"HAL:need to update delay due to resetDataRates");
break;
}
for (int i = Gyro;
i <= Accelerometer + mCompassSensor->isIntegrated();
i++) {
if (i != what && (mEnabled & (1 << i)) && ns > mDelays[i]) {
LOGV_IF(ENG_VERBOSE,
"HAL:ignore delay set due to sensor %d", i);
return 0;
}
}
break;
case MagneticField:
case RawMagneticField:
// need to update delay since they are different
// resetDataRates was called earlier
if ((mEnabled & (1 << what)) && (previousDelay != mDelays[what])) {
LOGV_IF(ENG_VERBOSE,
"HAL:need to update delay due to resetDataRates");
break;
}
if (mCompassSensor->isIntegrated() &&
(((mEnabled & (1 << Gyro)) && ns > mDelays[Gyro]) ||
((mEnabled & (1 << RawGyro)) && ns > mDelays[RawGyro]) ||
((mEnabled & (1 << Accelerometer)) &&
ns > mDelays[Accelerometer])) &&
!checkBatchEnabled()) {
/* if request is slower rate, ignore request */
LOGV_IF(ENG_VERBOSE,
"HAL:ignore delay set due to gyro/accel");
return 0;
}
break;
case Orientation:
case RotationVector:
case GameRotationVector:
case GeomagneticRotationVector:
case LinearAccel:
case Gravity:
if (isLowPowerQuatEnabled()) {
LOGV_IF(ENG_VERBOSE,
"HAL:need to update delay due to LPQ");
break;
}
for (int i = 0; i < NumSensors; i++) {
if (i != what && (mEnabled & (1 << i)) && ns > mDelays[i]) {
LOGV_IF(ENG_VERBOSE,
"HAL:ignore delay set due to sensor %d", i);
return 0;
}
}
break;
}
// pthread_mutex_lock(&mHALMutex);
int res = update_delay();
// pthread_mutex_unlock(&mHALMutex);
return res;
}
int MPLSensor::update_delay(void)
{
VFUNC_LOG;
int res = 0;
int64_t got;
if (mEnabled) {
int64_t wanted = 1000000000LL;
int64_t wanted_3rd_party_sensor = 1000000000LL;
// Sequence to change sensor's FIFO rate
// 1. reset master enable
// 2. Update delay
// 3. set master enable
// reset master enable
masterEnable(0);
int64_t gyroRate;
int64_t accelRate;
int64_t compassRate;
int rateInus;
/* search the minimum delay requested across all enabled sensors */
for (int i = 0; i < NumSensors; i++) {
if (mEnabled & (1 << i)) {
int64_t ns = mDelays[i];
wanted = wanted < ns ? wanted : ns;
}
}
if (mDmpOn) {
gyroRate = mDelays[Gyro] < mDelays[RawGyro] ? mDelays[Gyro] : mDelays[RawGyro];
accelRate = mDelays[Accelerometer];
compassRate = mDelays[MagneticField] < mDelays[RawMagneticField] ? mDelays[MagneticField] : mDelays[RawMagneticField];
#ifdef ENABLE_MULTI_RATE
gyroRate = wanted;
accelRate = wanted;
compassRate = wanted;
// same delay for 3rd party Accel or Compass
wanted_3rd_party_sensor = wanted;
#endif
}
else {
gyroRate = wanted;
accelRate = wanted;
compassRate = wanted;
// same delay for 3rd party Accel or Compass
wanted_3rd_party_sensor = wanted;
}
int enabled_sensors = mEnabled;
int tempFd = -1;
if(mFeatureActiveMask & INV_DMP_BATCH_MODE) {
// set batch rates
LOGV_IF(ENG_VERBOSE, "HAL: mFeatureActiveMask=%016llx", mFeatureActiveMask);
LOGV("HAL: batch mode is set, set batch data rates");
if (setBatchDataRates() < 0) {
LOGE("HAL:ERR can't set batch data rates");
}
} else {
/* set master sampling frequency */
int64_t tempWanted = wanted;
getDmpRate(&tempWanted);
/* driver only looks at sampling frequency if DMP is off */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / tempWanted, mpu.gyro_fifo_rate, getTimestamp());
tempFd = open(mpu.gyro_fifo_rate, O_RDWR);
res = write_attribute_sensor(tempFd, 1000000000.f / tempWanted);
LOGE_IF(res < 0, "HAL:sampling frequency update delay error");
if (LA_ENABLED || GR_ENABLED || RV_ENABLED
|| GRV_ENABLED || O_ENABLED || GMRV_ENABLED) {
rateInus = (int)wanted / 1000LL;
/* set rate in MPL */
/* compass can only do 100Hz max */
inv_set_gyro_sample_rate(rateInus);
inv_set_accel_sample_rate(rateInus);
inv_set_compass_sample_rate(rateInus);
LOGV_IF(ENG_VERBOSE,
"HAL:MPL gyro sample rate: (mpl)=%d us (mpu)=%.2f Hz",
rateInus, 1000000000.f / gyroRate);
LOGV_IF(ENG_VERBOSE,
"HAL:MPL accel sample rate: (mpl)=%d us (mpu)=%.2f Hz",
rateInus, 1000000000.f / accelRate);
LOGV_IF(ENG_VERBOSE,
"HAL:MPL compass sample rate: (mpl)=%d us (mpu)=%.2f Hz",
rateInus, 1000000000.f / compassRate);
LOGV_IF(ENG_VERBOSE,
"mFeatureActiveMask=%016llx", mFeatureActiveMask);
//TODO: may be able to combine DMP_FEATURE_MASK, DMP_SENSOR_MASK in the future
if(mFeatureActiveMask & DMP_FEATURE_MASK) {
gyroRate = wanted;
accelRate = wanted;
compassRate = wanted;
// same delay for 3rd party Accel or Compass
wanted_3rd_party_sensor = wanted;
rateInus = (int)wanted / 1000LL;
/* set rate in MPL */
/* compass can only do 100Hz max */
/*inv_set_gyro_sample_rate(rateInus);
inv_set_accel_sample_rate(rateInus);
inv_set_compass_sample_rate(rateInus);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL gyro sample rate: (mpl)=%d us (mpu)=%.2f Hz", rateInus, 1000000000.f / gyroRate);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL accel sample rate: (mpl)=%d us (mpu)=%.2f Hz", rateInus, 1000000000.f / accelRate);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL compass sample rate: (mpl)=%d us (mpu)=%.2f Hz", rateInus, 1000000000.f / compassRate);
*/
// Set LP Quaternion sample rate if enabled
if (checkLPQuaternion()) {
if (wanted <= RATE_200HZ) {
#ifndef USE_LPQ_AT_FASTEST
enableLPQuaternion(0);
#endif
} else {
inv_set_quat_sample_rate(rateInus);
LOGV_IF(ENG_VERBOSE, "HAL:MPL quat sample rate: "
"(mpl)=%d us (mpu)=%.2f Hz",
rateInus, 1000000000.f / wanted);
}
}
}
LOGV_IF(EXTRA_VERBOSE, "HAL:setDelay - Fusion");
//nsToHz
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / gyroRate, mpu.gyro_rate,
getTimestamp());
tempFd = open(mpu.gyro_rate, O_RDWR);
res = write_attribute_sensor(tempFd, 1000000000.f / gyroRate);
if(res < 0) {
LOGE("HAL:GYRO update delay error");
}
if(USE_THIRD_PARTY_ACCEL == 1) {
// 3rd party accelerometer - if applicable
// nsToHz (BMA250)
LOGV_IF(SYSFS_VERBOSE, "echo %lld > %s (%lld)",
wanted_3rd_party_sensor / 1000000L, mpu.accel_rate,
getTimestamp());
tempFd = open(mpu.accel_rate, O_RDWR);
res = write_attribute_sensor(tempFd,
wanted_3rd_party_sensor / 1000000L);
LOGE_IF(res < 0, "HAL:ACCEL update delay error");
} else {
// mpu accel
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / accelRate, mpu.accel_rate,
getTimestamp());
tempFd = open(mpu.accel_rate, O_RDWR);
res = write_attribute_sensor(tempFd, 1000000000.f / accelRate);
LOGE_IF(res < 0, "HAL:ACCEL update delay error");
}
if (!mCompassSensor->isIntegrated()) {
// stand-alone compass - if applicable
LOGV_IF(ENG_VERBOSE,
"HAL:Ext compass delay %lld", wanted_3rd_party_sensor);
LOGV_IF(ENG_VERBOSE, "HAL:Ext compass rate %.2f Hz",
1000000000.f / wanted_3rd_party_sensor);
if (wanted_3rd_party_sensor <
mCompassSensor->getMinDelay() * 1000LL) {
wanted_3rd_party_sensor =
mCompassSensor->getMinDelay() * 1000LL;
}
LOGV_IF(ENG_VERBOSE,
"HAL:Ext compass delay %lld", wanted_3rd_party_sensor);
LOGV_IF(ENG_VERBOSE, "HAL:Ext compass rate %.2f Hz",
1000000000.f / wanted_3rd_party_sensor);
mCompassSensor->setDelay(ID_M, wanted_3rd_party_sensor);
got = mCompassSensor->getDelay(ID_M);
inv_set_compass_sample_rate(got / 1000);
} else {
// compass on secondary bus
if (compassRate < mCompassSensor->getMinDelay() * 1000LL) {
compassRate = mCompassSensor->getMinDelay() * 1000LL;
}
mCompassSensor->setDelay(ID_M, compassRate);
}
/*
//nsTons - nothing to be done
strcpy(&compass_sensor_sysfs_path[compass_sensor_sysfs_path_len],
COMPASS_SENSOR_DELAY);
tempFd = open(compass_sensor_sysfs_path, O_RDWR);
LOGV_IF(PROCESS_VERBOSE,
"setDelay - open path: %s", compass_sensor_sysfs_path);
wanted = 20000000LLU;
res = write_attribute_sensor(tempFd, wanted);
if(res < 0) {
LOGE("Compass update delay error");
}
*/
} else {
if (GY_ENABLED || RGY_ENABLED) {
wanted = (mDelays[Gyro] <= mDelays[RawGyro]?
(mEnabled & (1 << Gyro)? mDelays[Gyro]: mDelays[RawGyro]):
(mEnabled & (1 << RawGyro)? mDelays[RawGyro]: mDelays[Gyro]));
LOGV_IF(ENG_VERBOSE, "mFeatureActiveMask=%016llx", mFeatureActiveMask);
if (mFeatureActiveMask & DMP_FEATURE_MASK) {
//int64_t tempWanted;
//getDmpRate(&tempWanted);
}
inv_set_gyro_sample_rate((int)wanted/1000LL);
LOGV_IF(ENG_VERBOSE,
"HAL:MPL gyro sample rate: (mpl)=%d us", int(wanted/1000LL));
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / wanted, mpu.gyro_rate, getTimestamp());
tempFd = open(mpu.gyro_rate, O_RDWR);
res = write_attribute_sensor(tempFd, 1000000000.f / wanted);
LOGE_IF(res < 0, "HAL:GYRO update delay error");
}
if (A_ENABLED) { /* there is only 1 fifo rate for MPUxxxx */
#if (0)
wanted = mDelays[Accelerometer];
#else
if (GY_ENABLED && mDelays[Gyro] < mDelays[Accelerometer]) {
wanted = mDelays[Gyro];
} else if (RGY_ENABLED && mDelays[RawGyro]
< mDelays[Accelerometer]) {
wanted = mDelays[RawGyro];
} else {
wanted = mDelays[Accelerometer];
}
#endif
LOGV_IF(ENG_VERBOSE, "mFeatureActiveMask=%016llx", mFeatureActiveMask);
if (mFeatureActiveMask & DMP_FEATURE_MASK) {
//int64_t tempWanted;
//getDmpRate(&tempWanted);
}
inv_set_accel_sample_rate((int)wanted/1000LL);
LOGV_IF(ENG_VERBOSE, "HAL:MPL accel sample rate: (mpl)=%d us",
int(wanted/1000LL));
/* TODO: use function pointers to calculate delay value specific
to vendor */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / wanted, mpu.accel_rate,
getTimestamp());
tempFd = open(mpu.accel_rate, O_RDWR);
if(USE_THIRD_PARTY_ACCEL == 1) {
//BMA250 in ms
res = write_attribute_sensor(tempFd, wanted / 1000000L);
}
else {
//MPUxxxx in hz
res = write_attribute_sensor(tempFd, 1000000000.f/wanted);
}
LOGE_IF(res < 0, "HAL:ACCEL update delay error");
}
/* Invensense compass calibration */
if (M_ENABLED || RM_ENABLED) {
int64_t compassWanted = (mDelays[MagneticField] <= mDelays[RawMagneticField]?
(mEnabled & (1 << MagneticField)? mDelays[MagneticField]: mDelays[RawMagneticField]):
(mEnabled & (1 << RawMagneticField)? mDelays[RawMagneticField]: mDelays[MagneticField]));
if (!mCompassSensor->isIntegrated()) {
wanted = compassWanted;
} else {
#if (0)
wanted = compassWanted;
#else
if (GY_ENABLED
&& (mDelays[Gyro] < compassWanted)) {
wanted = mDelays[Gyro];
} else if (RGY_ENABLED
&& mDelays[RawGyro] < compassWanted) {
wanted = mDelays[RawGyro];
} else if (A_ENABLED && mDelays[Accelerometer]
< compassWanted) {
wanted = mDelays[Accelerometer];
} else {
wanted = compassWanted;
}
#endif
LOGV_IF(ENG_VERBOSE, "mFeatureActiveMask=%016llx", mFeatureActiveMask);
if (mFeatureActiveMask & DMP_FEATURE_MASK) {
//int64_t tempWanted;
//getDmpRate(&tempWanted);
}
}
mCompassSensor->setDelay(ID_M, wanted);
got = mCompassSensor->getDelay(ID_M);
inv_set_compass_sample_rate(got / 1000);
LOGV_IF(ENG_VERBOSE, "HAL:MPL compass sample rate: (mpl)=%d us",
int(got/1000LL));
}
if (PS_ENABLED) {
int64_t pressureRate = mDelays[Pressure];
LOGV_IF(ENG_VERBOSE, "mFeatureActiveMask=%016llx", mFeatureActiveMask);
if (mFeatureActiveMask & DMP_FEATURE_MASK) {
//int64_t tempWanted;
//getDmpRate(&tempWanted);
}
mPressureSensor->setDelay(ID_PS, pressureRate);
LOGE_IF(res < 0, "HAL:PRESSURE update delay error");
}
}
} //end of non batch mode
unsigned long sensors = mLocalSensorMask & mMasterSensorMask;
if (sensors &
(INV_THREE_AXIS_GYRO
| INV_THREE_AXIS_ACCEL
| (INV_THREE_AXIS_COMPASS * mCompassSensor->isIntegrated()
| (INV_ONE_AXIS_PRESSURE * mPressureSensor->isIntegrated())))) {
LOGV_IF(ENG_VERBOSE, "sensors=%lu", sensors);
res = masterEnable(1);
if(res < 0)
return res;
} else { // all sensors idle -> reduce power, unless DMP is needed
LOGV_IF(ENG_VERBOSE, "mFeatureActiveMask=%016llx", mFeatureActiveMask);
if(mFeatureActiveMask & DMP_FEATURE_MASK) {
res = masterEnable(1);
if(res < 0)
return res;
}
}
}
return res;
}
/* For Third Party Accel Input Subsystem Drivers only */
int MPLSensor::readAccelEvents(sensors_event_t* data, int count)
{
VHANDLER_LOG;
if (count < 1)
return -EINVAL;
ssize_t n = mAccelInputReader.fill(accel_fd);
if (n < 0) {
LOGE("HAL:missed accel events, exit");
return n;
}
int numEventReceived = 0;
input_event const* event;
int done = 0;
while (done == 0 && count && mAccelInputReader.readEvent(&event)) {
int type = event->type;
if (type == EV_ABS) {
if (event->code == EVENT_TYPE_ACCEL_X) {
mPendingMask |= 1 << Accelerometer;
mCachedAccelData[0] = event->value;
} else if (event->code == EVENT_TYPE_ACCEL_Y) {
mPendingMask |= 1 << Accelerometer;
mCachedAccelData[1] = event->value;
} else if (event->code == EVENT_TYPE_ACCEL_Z) {
mPendingMask |= 1 << Accelerometer;
mCachedAccelData[2] =event-> value;
}
} else if (type == EV_SYN) {
done = 1;
if (mLocalSensorMask & INV_THREE_AXIS_ACCEL) {
inv_build_accel(mCachedAccelData, 0, getTimestamp());
}
} else {
LOGE("HAL:AccelSensor: unknown event (type=%d, code=%d)",
type, event->code);
}
mAccelInputReader.next();
}
return numEventReceived;
}
/**
* Should be called after reading at least one of gyro
* compass or accel data. (Also okay for handling all of them).
* @returns 0, if successful, error number if not.
*/
int MPLSensor::readEvents(sensors_event_t* data, int count)
{
VHANDLER_LOG;
inv_execute_on_data();
int numEventReceived = 0;
long msg;
msg = inv_get_message_level_0(1);
if (msg) {
if (msg & INV_MSG_MOTION_EVENT) {
LOGV_IF(PROCESS_VERBOSE, "HAL:**** Motion ****\n");
}
if (msg & INV_MSG_NO_MOTION_EVENT) {
LOGV_IF(PROCESS_VERBOSE, "HAL:***** No Motion *****\n");
/* after the first no motion, the gyro should be
calibrated well */
mGyroAccuracy = SENSOR_STATUS_ACCURACY_HIGH;
/* if gyros are on and we got a no motion, set a flag
indicating that the cal file can be written. */
mHaveGoodMpuCal = true;
}
if(msg & INV_MSG_NEW_AB_EVENT) {
LOGV_IF(EXTRA_VERBOSE, "HAL:***** New Accel Bias *****\n");
getAccelBias();
mAccelAccuracy = inv_get_accel_accuracy();
}
if(msg & INV_MSG_NEW_GB_EVENT) {
LOGV_IF(EXTRA_VERBOSE, "HAL:***** New Gyro Bias *****\n");
getGyroBias();
setGyroBias();
}
if(msg & INV_MSG_NEW_FGB_EVENT) {
LOGV_IF(EXTRA_VERBOSE, "HAL:***** New Factory Gyro Bias *****\n");
getFactoryGyroBias();
}
if(msg & INV_MSG_NEW_FAB_EVENT) {
LOGV_IF(EXTRA_VERBOSE, "HAL:***** New Factory Accel Bias *****\n");
getFactoryAccelBias();
}
if(msg & INV_MSG_NEW_CB_EVENT) {
LOGV_IF(EXTRA_VERBOSE, "HAL:***** New Compass Bias *****\n");
getCompassBias();
mCompassAccuracy = inv_get_mag_accuracy();
}
}
// handle flush complete event
if(mFlushBatchSet && mFlushEnabled != -1) {
sensors_event_t temp;
int sendEvent = metaHandler(&temp, META_DATA_FLUSH_COMPLETE);
if(sendEvent == 1 && count > 0) {
*data++ = temp;
count--;
numEventReceived++;
}
}
// handle partial packet read
if (mSkipReadEvents)
return numEventReceived;
for (int i = 0; i < NumSensors; i++) {
int update = 0;
// handle step detector when ped_q is enabled
if(mPedUpdate) {
if (i == StepDetector) {
update = readDmpPedometerEvents(data, count, ID_P,
SENSOR_TYPE_STEP_DETECTOR, 1);
mPedUpdate = 0;
if(update == 1 && count > 0) {
data->timestamp = mStepSensorTimestamp;
count--;
numEventReceived++;
continue;
}
} else {
if (mPedUpdate == DATA_FORMAT_STEP) {
continue;
}
}
}
// load up virtual sensors
if (mEnabled & (1 << i)) {
update = CALL_MEMBER_FN(this, mHandlers[i])(mPendingEvents + i);
mPendingMask |= (1 << i);
if (update && (count > 0)) {
*data++ = mPendingEvents[i];
count--;
numEventReceived++;
}
}
}
return numEventReceived;
}
// collect data for MPL (but NOT sensor service currently), from driver layer
void MPLSensor::buildMpuEvent(void)
{
VHANDLER_LOG;
mSkipReadEvents = 0;
int64_t mGyroSensorTimestamp=0, mAccelSensorTimestamp=0, latestTimestamp=0;
int lp_quaternion_on = 0, sixAxis_quaternion_on = 0,
ped_quaternion_on = 0, ped_standalone_on = 0;
size_t nbyte;
unsigned short data_format = 0;
int mask = 0,
sensors = ((mLocalSensorMask & INV_THREE_AXIS_GYRO)? 1 : 0) +
((mLocalSensorMask & INV_THREE_AXIS_ACCEL)? 1 : 0) +
(((mLocalSensorMask & INV_THREE_AXIS_COMPASS)
&& mCompassSensor->isIntegrated())? 1 : 0) +
((mLocalSensorMask & INV_ONE_AXIS_PRESSURE)? 1 : 0);
//LOGV("mLocalSensorMask=0x%lx", mLocalSensorMask);
char *rdata = mIIOBuffer;
ssize_t rsize = 0;
size_t readCounter = 0;
char *rdataP = NULL;
/* 2 Bytes header + 6 Bytes x,y,z data | 8 bytes timestamp */
nbyte= (BYTES_PER_SENSOR + 8) * sensors * 1;
/* special case for 6 Axis or LPQ */
/* 2 Bytes header + 4 Bytes x data + 2 Bytes n/a */
/* 4 Bytes y data | 4 Bytes z data */
/* 8 Bytes timestamp */
if (isLowPowerQuatEnabled()) {
lp_quaternion_on = checkLPQuaternion();
if (lp_quaternion_on == 1) {
nbyte += BYTES_QUAT_DATA;
}
}
if ((sixAxis_quaternion_on = check6AxisQuatEnabled())) {
// sixAxis is mutually exclusive to LPQ
// and it is also never enabled when continuous data is enabled
// mLocalSensorMask does not need to be accounted for here
// because accel/gyro fifo are always turned off
nbyte += BYTES_QUAT_DATA;
}
if ((ped_quaternion_on = checkPedQuatEnabled())) {
nbyte += BYTES_PER_SENSOR_PACKET;
}
if ((ped_standalone_on = checkPedStandaloneEnabled())) {
nbyte += BYTES_PER_SENSOR_PACKET;
}
if (checkBatchEnabled()) {
nbyte = 24 - mLeftOverBufferSize;
}
/* check previous copied buffer */
/* append with just read data */
if (mLeftOverBufferSize > 0) {
LOGV_IF(0, "append old buffer size=%d", mLeftOverBufferSize);
memcpy(rdata, mLeftOverBuffer, mLeftOverBufferSize);
LOGV_IF(0,
"HAL:input retrieve rdata=:%d, %d, %d, %d,%d, %d, %d, %d,%d, %d, "
"%d, %d,%d, %d, %d, %d\n",
rdata[0], rdata[1], rdata[2], rdata[3],
rdata[4], rdata[5], rdata[6], rdata[7],
rdata[8], rdata[9], rdata[10], rdata[11],
rdata[12], rdata[13], rdata[14], rdata[15]);
}
rdataP = rdata + mLeftOverBufferSize;
/* read expected number of bytes */
rsize = read(iio_fd, rdataP, nbyte);
if(rsize < 0) {
/* IIO buffer might have old data.
Need to flush it if no sensor is on, to avoid infinite
read loop.*/
LOGE("HAL:input data file descriptor not available - (%s)",
strerror(errno));
if (sensors == 0) {
rsize = read(iio_fd, rdata, MAX_SUSPEND_BATCH_PACKET_SIZE);
}
return;
}
#if 1
if((rsize + mLeftOverBufferSize) == 8) {
/* store packet then return */
memcpy(mLeftOverBuffer, rdataP, rsize);
mLeftOverBufferSize += rsize;
LOGV_IF(1, "HAL:input data has partial packet");
LOGV_IF(1, "HAL:input data mLeftOverBufferSize=%d", mLeftOverBufferSize);
LOGV_IF(1,
"HAL:input catch up retrieve rdata=:%d, %d, %d, %d, %d, %d, %d, %d",
mLeftOverBuffer[0], mLeftOverBuffer[1], mLeftOverBuffer[2], mLeftOverBuffer[3],
mLeftOverBuffer[4], mLeftOverBuffer[5], mLeftOverBuffer[6], mLeftOverBuffer[7]);
mSkipReadEvents = 1;
return;
}
#endif
/* reset data and count pointer */
rdataP = rdata;
if (checkBatchEnabled()) {
readCounter = 24;
}
else {
readCounter = rsize + mLeftOverBufferSize;
}
#ifdef TESTING
LOGV_IF(INPUT_DATA,
"HAL:input rdataP:r=%ld, n=%d,"
"%d, %d, %d, %d,%d, %d, %d, %d,%d, %d, %d, %d,%d, %d, %d, %d\n",
rsize, nbyte,
rdataP[0], rdataP[1], rdataP[2], rdataP[3],
rdataP[4], rdataP[5], rdataP[6], rdataP[7],
rdataP[8], rdataP[9], rdataP[10], rdataP[11],
rdataP[12], rdataP[13], rdataP[14], rdataP[15]);
#endif
LOGV_IF(INPUT_DATA && ENG_VERBOSE,
"HAL:input b=%d rdata= %d nbyte= %d rsize= %d readCounter= %d",
checkBatchEnabled(), *((short *) rdata), nbyte, (int)rsize, readCounter);
LOGV_IF(INPUT_DATA && ENG_VERBOSE,
"HAL:input sensors= %d, lp_q_on= %d, 6axis_q_on= %d, "
"ped_q_on= %d, ped_standalone_on= %d",
sensors, lp_quaternion_on, sixAxis_quaternion_on, ped_quaternion_on,
ped_standalone_on);
while (readCounter > 0) {
// since copied buffer is already accounted for, reset left over size
mLeftOverBufferSize = 0;
// clear data format mask for parsing the next set of data
mask = 0;
data_format = *((short *)(rdata));
LOGV_IF(INPUT_DATA && ENG_VERBOSE,
"HAL:input data_format=%x", data_format);
if ((data_format & ~DATA_FORMAT_MASK) || (data_format == 0)) {
LOGE("HAL:input invalid data_format 0x%02X", data_format);
return;
}
if (data_format & DATA_FORMAT_STEP) {
if (data_format == DATA_FORMAT_STEP) {
rdata += BYTES_PER_SENSOR;
latestTimestamp = *((long long*) (rdata));
LOGV_IF(ENG_VERBOSE, "STEP DETECTED:0x%x - ts: %lld", data_format, latestTimestamp);
// readCounter is decrement by 24 because DATA_FORMAT_STEP only applies in batch mode
readCounter -= BYTES_PER_SENSOR_PACKET;
} else {
LOGV_IF(0, "STEP DETECTED:0x%x", data_format);
}
mPedUpdate |= data_format;
mask |= DATA_FORMAT_STEP;
// cancels step bit
data_format &= (~DATA_FORMAT_STEP);
}
if (data_format & DATA_FORMAT_MARKER) {
LOGV_IF(ENG_VERBOSE, "MARKER DETECTED:0x%x", data_format);
// cancels marker bit
data_format &= (~DATA_FORMAT_MARKER);
mFlushBatchSet = 1;
}
if (data_format == DATA_FORMAT_QUAT) {
mCachedQuaternionData[0] = *((int *) (rdata + 4));
mCachedQuaternionData[1] = *((int *) (rdata + 8));
mCachedQuaternionData[2] = *((int *) (rdata + 12));
rdata += QUAT_ONLY_LAST_PACKET_OFFSET;
mQuatSensorTimestamp = *((long long*) (rdata));
mask |= DATA_FORMAT_QUAT;
readCounter -= BYTES_QUAT_DATA;
}
else if (data_format == DATA_FORMAT_6_AXIS) {
mCached6AxisQuaternionData[0] = *((int *) (rdata + 4));
mCached6AxisQuaternionData[1] = *((int *) (rdata + 8));
mCached6AxisQuaternionData[2] = *((int *) (rdata + 12));
rdata += QUAT_ONLY_LAST_PACKET_OFFSET;
mQuatSensorTimestamp = *((long long*) (rdata));
mask |= DATA_FORMAT_6_AXIS;
readCounter -= BYTES_QUAT_DATA;
}
else if (data_format == DATA_FORMAT_PED_QUAT) {
mCachedPedQuaternionData[0] = *((short *) (rdata + 2));
mCachedPedQuaternionData[1] = *((short *) (rdata + 4));
mCachedPedQuaternionData[2] = *((short *) (rdata + 6));
rdata += BYTES_PER_SENSOR;
mQuatSensorTimestamp = *((long long*) (rdata));
mask |= DATA_FORMAT_PED_QUAT;
readCounter -= BYTES_PER_SENSOR_PACKET;
}
else if (data_format == DATA_FORMAT_PED_STANDALONE) {
LOGV_IF(ENG_VERBOSE, "STEP DETECTED:0x%x", data_format);
rdata += BYTES_PER_SENSOR;
mStepSensorTimestamp = *((long long*) (rdata));
mask |= DATA_FORMAT_PED_STANDALONE;
readCounter -= BYTES_PER_SENSOR_PACKET;
mPedUpdate |= data_format;
}
else if (data_format == DATA_FORMAT_GYRO) {
mCachedGyroData[0] = *((short *) (rdata + 2));
mCachedGyroData[1] = *((short *) (rdata + 4));
mCachedGyroData[2] = *((short *) (rdata + 6));
rdata += BYTES_PER_SENSOR;
mGyroSensorTimestamp = *((long long*) (rdata));
mask |= DATA_FORMAT_GYRO;
readCounter -= BYTES_PER_SENSOR_PACKET;
}
else if (data_format == DATA_FORMAT_ACCEL) {
mCachedAccelData[0] = *((short *) (rdata + 2));
mCachedAccelData[1] = *((short *) (rdata + 4));
mCachedAccelData[2] = *((short *) (rdata + 6));
rdata += BYTES_PER_SENSOR;
mAccelSensorTimestamp = *((long long*) (rdata));
mask |= DATA_FORMAT_ACCEL;
readCounter -= BYTES_PER_SENSOR_PACKET;
}
else if (data_format == DATA_FORMAT_COMPASS) {
if (mCompassSensor->isIntegrated()) {
mCachedCompassData[0] = *((short *) (rdata + 2));
mCachedCompassData[1] = *((short *) (rdata + 4));
mCachedCompassData[2] = *((short *) (rdata + 6));
rdata += BYTES_PER_SENSOR;
mCompassTimestamp = *((long long*) (rdata));
mask |= DATA_FORMAT_COMPASS;
readCounter -= BYTES_PER_SENSOR_PACKET;
}
}
else if (data_format == DATA_FORMAT_PRESSURE) {
if (mPressureSensor->isIntegrated()) {
mCachedPressureData =
((*((short *)(rdata + 4))) << 16) +
(*((unsigned short *) (rdata + 6)));
rdata += BYTES_PER_SENSOR;
mPressureTimestamp = *((long long*) (rdata));
if (mCachedPressureData != 0) {
mask |= DATA_FORMAT_PRESSURE;
}
readCounter -= BYTES_PER_SENSOR_PACKET;
}
}
rdata += BYTES_PER_SENSOR;
size_t storeBufferSize = 0;
if (checkBatchEnabled()) {
storeBufferSize = 8;
} else {
storeBufferSize = 24;
}
/* read ahead and store left over data if any */
if ((readCounter != 0) && ((checkBatchEnabled() && (rsize == (ssize_t)nbyte)) ||
(!checkBatchEnabled() && (rsize != (ssize_t)nbyte)))
&&(readCounter <= storeBufferSize)) {
LOGV_IF(0, "!!! not enough data readCounter=%d, expected nbyte=%d, rsize=%d", readCounter, nbyte, (int)rsize);
memcpy(mLeftOverBuffer, rdata, readCounter);
LOGV_IF(0,
"HAL:input store rdata=:%d, %d, %d, %d,%d, %d, %d, %d,%d, "
"%d, %d, %d,%d, %d, %d, %d\n",
mLeftOverBuffer[0], mLeftOverBuffer[1], mLeftOverBuffer[2], mLeftOverBuffer[3],
mLeftOverBuffer[4], mLeftOverBuffer[5], mLeftOverBuffer[6], mLeftOverBuffer[7],
mLeftOverBuffer[8], mLeftOverBuffer[9], mLeftOverBuffer[10], mLeftOverBuffer[11],
mLeftOverBuffer[12],mLeftOverBuffer[13],mLeftOverBuffer[14], mLeftOverBuffer[15]);
mLeftOverBufferSize = readCounter;
readCounter = 0;
LOGV_IF(0, "!!! stored number of bytes:%d", mLeftOverBufferSize);
} else if (checkBatchEnabled()) {
/* reset count since this is the last packet for the data set */
readCounter = 0;
mLeftOverBufferSize = 0;
}
/* handle data read */
if (mask & DATA_FORMAT_GYRO) {
/* batch mode does not batch temperature */
/* disable temperature read */
if (!(mFeatureActiveMask & INV_DMP_BATCH_MODE)) {
// send down temperature every 0.5 seconds
// with timestamp measured in "driver" layer
if(mGyroSensorTimestamp - mTempCurrentTime >= 500000000LL) {
mTempCurrentTime = mGyroSensorTimestamp;
long long temperature[2];
if(inv_read_temperature(temperature) == 0) {
LOGV_IF(INPUT_DATA,
"HAL:input inv_read_temperature = %lld, timestamp= %lld",
temperature[0], temperature[1]);
inv_build_temp(temperature[0], temperature[1]);
}
#ifdef TESTING
long bias[3], temp, temp_slope[3];
inv_get_mpl_gyro_bias(bias, &temp);
inv_get_gyro_ts(temp_slope);
LOGI("T: %.3f "
"GB: %+13f %+13f %+13f "
"TS: %+13f %+13f %+13f "
"\n",
(float)temperature[0] / 65536.f,
(float)bias[0] / 65536.f / 16.384f,
(float)bias[1] / 65536.f / 16.384f,
(float)bias[2] / 65536.f / 16.384f,
temp_slope[0] / 65536.f,
temp_slope[1] / 65536.f,
temp_slope[2] / 65536.f);
#endif
}
}
mPendingMask |= 1 << Gyro;
mPendingMask |= 1 << RawGyro;
if (mLocalSensorMask & INV_THREE_AXIS_GYRO) {
inv_build_gyro(mCachedGyroData, mGyroSensorTimestamp);
LOGV_IF(INPUT_DATA,
"HAL:input inv_build_gyro: %+8d %+8d %+8d - %lld",
mCachedGyroData[0], mCachedGyroData[1],
mCachedGyroData[2], mGyroSensorTimestamp);
}
latestTimestamp = mGyroSensorTimestamp;
}
if (mask & DATA_FORMAT_ACCEL) {
mPendingMask |= 1 << Accelerometer;
if (mLocalSensorMask & INV_THREE_AXIS_ACCEL) {
inv_build_accel(mCachedAccelData, 0, mAccelSensorTimestamp);
LOGV_IF(INPUT_DATA,
"HAL:input inv_build_accel: %+8ld %+8ld %+8ld - %lld",
mCachedAccelData[0], mCachedAccelData[1],
mCachedAccelData[2], mAccelSensorTimestamp);
/* remember inital 6 axis quaternion */
inv_time_t tempTimestamp;
inv_get_6axis_quaternion(mInitial6QuatValue, &tempTimestamp);
if (mInitial6QuatValue[0] != 0 || mInitial6QuatValue[1] != 0 ||
mInitial6QuatValue[2] != 0 || mInitial6QuatValue[3] != 0) {
mInitial6QuatValueAvailable = 1;
LOGV_IF(INPUT_DATA && ENG_VERBOSE,
"HAL:input build 6q init: %+8ld %+8ld %+8ld %+8ld",
mInitial6QuatValue[0], mInitial6QuatValue[1],
mInitial6QuatValue[2], mInitial6QuatValue[3]);
}
}
latestTimestamp = mAccelSensorTimestamp;
}
if ((mask & DATA_FORMAT_COMPASS) && mCompassSensor->isIntegrated()) {
int status = 0;
if (mCompassSensor->providesCalibration()) {
status = mCompassSensor->getAccuracy();
status |= INV_CALIBRATED;
}
if (mLocalSensorMask & INV_THREE_AXIS_COMPASS) {
inv_build_compass(mCachedCompassData, status,
mCompassTimestamp);
LOGV_IF(INPUT_DATA,
"HAL:input inv_build_compass: %+8ld %+8ld %+8ld - %lld",
mCachedCompassData[0], mCachedCompassData[1],
mCachedCompassData[2], mCompassTimestamp);
}
latestTimestamp = mCompassTimestamp;
}
if (isLowPowerQuatEnabled() && lp_quaternion_on == 1
&& (mask & DATA_FORMAT_QUAT)) {
/* if bias was applied to DMP bias,
set status bits to disable gyro bias cal */
int status = 0;
if (mGyroBiasApplied == true) {
LOGV_IF(INPUT_DATA && ENG_VERBOSE, "HAL:input dmp bias is used");
status |= INV_BIAS_APPLIED;
}
status |= 32 | INV_QUAT_3AXIS; /* default 32 (16/32bits) */
inv_build_quat(mCachedQuaternionData,
status,
mQuatSensorTimestamp);
LOGV_IF(INPUT_DATA,
"HAL:input inv_build_quat-3x: %+8ld %+8ld %+8ld - %lld",
mCachedQuaternionData[0], mCachedQuaternionData[1],
mCachedQuaternionData[2],
mQuatSensorTimestamp);
latestTimestamp = mQuatSensorTimestamp;
}
if ((mask & DATA_FORMAT_6_AXIS) && check6AxisQuatEnabled()
&& (sixAxis_quaternion_on == 1)) {
/* if bias was applied to DMP bias,
set status bits to disable gyro bias cal */
int status = 0;
if (mGyroBiasApplied == true) {
LOGV_IF(INPUT_DATA && ENG_VERBOSE, "HAL:input dmp bias is used");
status |= INV_QUAT_6AXIS;
}
status |= 32 | INV_QUAT_3AXIS; /* default 32 (16/32bits) */
inv_build_quat(mCached6AxisQuaternionData,
status,
mQuatSensorTimestamp);
LOGV_IF(INPUT_DATA,
"HAL:input inv_build_quat-6x: %+8ld %+8ld %+8ld - %lld",
mCached6AxisQuaternionData[0], mCached6AxisQuaternionData[1],
mCached6AxisQuaternionData[2], mQuatSensorTimestamp);
latestTimestamp = mQuatSensorTimestamp;
}
if ((mask & DATA_FORMAT_PED_QUAT) && checkPedQuatEnabled()
&& (ped_quaternion_on == 1)) {
/* if bias was applied to DMP bias,
set status bits to disable gyro bias cal */
int status = 0;
if (mGyroBiasApplied == true) {
LOGV_IF(INPUT_DATA && ENG_VERBOSE,
"HAL:input dmp bias is used");
status |= INV_QUAT_6AXIS;
}
status |= 32 | INV_QUAT_3AXIS; /* default 32 (16/32bits) */
mCachedPedQuaternionData[0] = mCachedPedQuaternionData[0] << 16;
mCachedPedQuaternionData[1] = mCachedPedQuaternionData[1] << 16;
mCachedPedQuaternionData[2] = mCachedPedQuaternionData[2] << 16;
inv_build_quat(mCachedPedQuaternionData,
status,
mQuatSensorTimestamp);
LOGV_IF(INPUT_DATA,
"HAL:HAL:input inv_build_quat-ped_6x: %+8ld %+8ld %+8ld - %lld",
mCachedPedQuaternionData[0], mCachedPedQuaternionData[1],
mCachedPedQuaternionData[2], mQuatSensorTimestamp);
latestTimestamp = mQuatSensorTimestamp;
}
if ((mask & DATA_FORMAT_PRESSURE) && mPressureSensor->isIntegrated()) {
int status = 0;
if (mLocalSensorMask & INV_ONE_AXIS_PRESSURE) {
latestTimestamp = mPressureTimestamp;
mPressureUpdate = 1;
inv_build_pressure(mCachedPressureData,
status,
mPressureTimestamp);
LOGV_IF(INPUT_DATA,
"HAL:input inv_build_pressure: %+8ld - %lld",
mCachedPressureData, mPressureTimestamp);
}
}
/* take the latest timestamp */
if (mask & DATA_FORMAT_STEP) {
/* work around driver output duplicate step detector bit */
if (latestTimestamp > mStepSensorTimestamp) {
mStepSensorTimestamp = latestTimestamp;
LOGV_IF(INPUT_DATA,
"HAL:input build step: 1 - %lld", mStepSensorTimestamp);
} else {
mPedUpdate = 0;
}
}
} //while end
}
/* use for both MPUxxxx and third party compass */
void MPLSensor::buildCompassEvent(void)
{
VHANDLER_LOG;
int done = 0;
// pthread_mutex_lock(&mMplMutex);
// pthread_mutex_lock(&mHALMutex);
done = mCompassSensor->readSample(mCachedCompassData, &mCompassTimestamp);
if(mCompassSensor->isYasCompass()) {
if (mCompassSensor->checkCoilsReset() == 1) {
//Reset relevant compass settings
resetCompass();
}
}
if (done > 0) {
int status = 0;
if (mCompassSensor->providesCalibration()) {
status = mCompassSensor->getAccuracy();
status |= INV_CALIBRATED;
}
if (mLocalSensorMask & INV_THREE_AXIS_COMPASS) {
inv_build_compass(mCachedCompassData, status,
mCompassTimestamp);
LOGV_IF(INPUT_DATA,
"HAL:input inv_build_compass: %+8ld %+8ld %+8ld - %lld",
mCachedCompassData[0], mCachedCompassData[1],
mCachedCompassData[2], mCompassTimestamp);
}
}
// pthread_mutex_unlock(&mMplMutex);
// pthread_mutex_unlock(&mHALMutex);
}
int MPLSensor::resetCompass(void)
{
VFUNC_LOG;
//Reset compass cal if enabled
if (mMplFeatureActiveMask & INV_COMPASS_CAL) {
LOGV_IF(EXTRA_VERBOSE, "HAL:Reset compass cal");
inv_init_vector_compass_cal();
}
//Reset compass fit if enabled
if (mMplFeatureActiveMask & INV_COMPASS_FIT) {
LOGV_IF(EXTRA_VERBOSE, "HAL:Reset compass fit");
inv_init_compass_fit();
}
return 0;
}
int MPLSensor::getFd(void) const
{
VFUNC_LOG;
LOGV_IF(EXTRA_VERBOSE, "getFd returning %d", iio_fd);
return iio_fd;
}
int MPLSensor::getAccelFd(void) const
{
VFUNC_LOG;
LOGV_IF(EXTRA_VERBOSE, "getAccelFd returning %d", accel_fd);
return accel_fd;
}
int MPLSensor::getCompassFd(void) const
{
VFUNC_LOG;
int fd = mCompassSensor->getFd();
LOGV_IF(EXTRA_VERBOSE, "getCompassFd returning %d", fd);
return fd;
}
int MPLSensor::turnOffAccelFifo(void)
{
VFUNC_LOG;
int res = 0;
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.accel_fifo_enable, getTimestamp());
res += write_sysfs_int(mpu.accel_fifo_enable, 0);
return res;
}
int MPLSensor::turnOffGyroFifo(void)
{
VFUNC_LOG;
int res = 0;
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.gyro_fifo_enable, getTimestamp());
res += write_sysfs_int(mpu.gyro_fifo_enable, 0);
return res;
}
int MPLSensor::enableDmpOrientation(int en)
{
VFUNC_LOG;
int res = 0;
if (isMpuNonDmp())
return res;
// reset master enable
res = masterEnable(0);
if (res < 0)
return res;
if (en == 1) {
//Enable DMP orientation
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.display_orientation_on, getTimestamp());
if (write_sysfs_int(mpu.display_orientation_on, en) < 0) {
LOGE("HAL:ERR can't enable Android orientation");
res = -1; // indicate an err
return res;
}
// enable DMP
res = onDmp(1);
if (res < 0)
return res;
// set rate to 200Hz
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
200, mpu.accel_fifo_rate, getTimestamp());
if (write_sysfs_int(mpu.accel_fifo_rate, 200) < 0) {
res = -1;
LOGE("HAL:ERR can't set rate to 200Hz");
return res;
}
// enable accel engine
res = enableAccel(1);
if (res < 0)
return res;
// disable accel FIFO
if (!(mLocalSensorMask & mMasterSensorMask & INV_THREE_AXIS_ACCEL)) {
res = turnOffAccelFifo();
if (res < 0)
return res;
}
if (!mEnabled){
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
1, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, en) < 0) {
res = -1;
LOGE("HAL:ERR can't enable DMP event interrupt");
}
}
mFeatureActiveMask |= INV_DMP_DISPL_ORIENTATION;
LOGV_IF(ENG_VERBOSE, "mFeatureActiveMask=%016llx", mFeatureActiveMask);
} else {
mFeatureActiveMask &= ~INV_DMP_DISPL_ORIENTATION;
// disable DMP
if (mFeatureActiveMask == 0) {
res = onDmp(0);
if (res < 0)
return res;
// disable accel engine
if (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_ACCEL)) {
res = enableAccel(0);
if (res < 0)
return res;
}
}
if (mEnabled){
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, en) < 0) {
res = -1;
LOGE("HAL:ERR can't enable DMP event interrupt");
}
}
LOGV_IF(ENG_VERBOSE, "mFeatureActiveMask=%016llx", mFeatureActiveMask);
}
if (en || mEnabled || mFeatureActiveMask) {
res = masterEnable(1);
}
return res;
}
int MPLSensor::openDmpOrientFd(void)
{
VFUNC_LOG;
if (!isDmpDisplayOrientationOn() || dmp_orient_fd >= 0) {
LOGV_IF(PROCESS_VERBOSE,
"HAL:DMP display orientation disabled or file desc opened");
return 0;
}
dmp_orient_fd = open(mpu.event_display_orientation, O_RDONLY| O_NONBLOCK);
if (dmp_orient_fd < 0) {
LOGE("HAL:ERR couldn't open dmpOrient node");
return -1;
} else {
LOGV_IF(PROCESS_VERBOSE,
"HAL:dmp_orient_fd opened : %d", dmp_orient_fd);
return 0;
}
}
int MPLSensor::closeDmpOrientFd(void)
{
VFUNC_LOG;
if (dmp_orient_fd >= 0)
close(dmp_orient_fd);
return 0;
}
int MPLSensor::dmpOrientHandler(int orient)
{
VFUNC_LOG;
LOGV_IF(PROCESS_VERBOSE, "HAL:orient %x", orient);
return 0;
}
int MPLSensor::readDmpOrientEvents(sensors_event_t* data, int count)
{
VFUNC_LOG;
char dummy[4];
int screen_orientation = 0;
FILE *fp;
fp = fopen(mpu.event_display_orientation, "r");
if (fp == NULL) {
LOGE("HAL:cannot open event_display_orientation");
return 0;
} else {
if (fscanf(fp, "%d\n", &screen_orientation) < 0 || fclose(fp) < 0)
{
LOGE("HAL:cannot write event_display_orientation");
}
}
int numEventReceived = 0;
if (mDmpOrientationEnabled && count > 0) {
sensors_event_t temp;
temp.acceleration.x = 0;
temp.acceleration.y = 0;
temp.acceleration.z = 0;
temp.version = sizeof(sensors_event_t);
temp.sensor = ID_SO;
temp.acceleration.status
= SENSOR_STATUS_UNRELIABLE;
#ifdef ENABLE_DMP_SCREEN_AUTO_ROTATION
temp.type = SENSOR_TYPE_SCREEN_ORIENTATION;
temp.screen_orientation = screen_orientation;
#endif
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts);
temp.timestamp = (int64_t) ts.tv_sec * 1000000000 + ts.tv_nsec;
*data++ = temp;
count--;
numEventReceived++;
}
// read dummy data per driver's request
dmpOrientHandler(screen_orientation);
read(dmp_orient_fd, dummy, 4);
return numEventReceived;
}
int MPLSensor::getDmpOrientFd(void)
{
VFUNC_LOG;
LOGV_IF(EXTRA_VERBOSE, "getDmpOrientFd returning %d", dmp_orient_fd);
return dmp_orient_fd;
}
int MPLSensor::checkDMPOrientation(void)
{
VFUNC_LOG;
return ((mFeatureActiveMask & INV_DMP_DISPL_ORIENTATION) ? 1 : 0);
}
int MPLSensor::getDmpRate(int64_t *wanted)
{
VFUNC_LOG;
// set DMP output rate to FIFO
if(mDmpOn == 1) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
int(1000000000.f / *wanted), mpu.three_axis_q_rate,
getTimestamp());
write_sysfs_int(mpu.three_axis_q_rate, 1000000000.f / *wanted);
LOGV_IF(PROCESS_VERBOSE,
"HAL:DMP three axis rate %.2f Hz", 1000000000.f / *wanted);
if (mFeatureActiveMask & INV_DMP_BATCH_MODE) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
int(1000000000.f / *wanted), mpu.six_axis_q_rate,
getTimestamp());
write_sysfs_int(mpu.six_axis_q_rate, 1000000000.f / *wanted);
LOGV_IF(PROCESS_VERBOSE,
"HAL:DMP six axis rate %.2f Hz", 1000000000.f / *wanted);
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
int(1000000000.f / *wanted), mpu.ped_q_rate,
getTimestamp());
write_sysfs_int(mpu.ped_q_rate, 1000000000.f / *wanted);
LOGV_IF(PROCESS_VERBOSE,
"HAL:DMP ped quaternion rate %.2f Hz", 1000000000.f / *wanted);
}
//DMP running rate must be @ 200Hz
*wanted= RATE_200HZ;
LOGV_IF(PROCESS_VERBOSE,
"HAL:DMP rate= %.2f Hz", 1000000000.f / *wanted);
}
return 0;
}
int MPLSensor::getPollTime(void)
{
VFUNC_LOG;
return mPollTime;
}
int MPLSensor::getStepCountPollTime(void)
{
VFUNC_LOG;
if (mDmpStepCountEnabled) {
/* clamped to 1ms?, still rather large */
LOGV_IF(0/*EXTRA_VERBOSE*/, "Step Count poll time = %lld ms",
mStepCountPollTime / 1000000LL);
return (mStepCountPollTime / 1000000LL);
}
return 1000;
}
bool MPLSensor::hasStepCountPendingEvents(void)
{
VFUNC_LOG;
if (mDmpStepCountEnabled) {
struct timespec t_now;
int64_t interval = 0;
clock_gettime(CLOCK_MONOTONIC, &t_now);
interval = ((int64_t(t_now.tv_sec) * 1000000000LL + t_now.tv_nsec) -
(int64_t(mt_pre.tv_sec) * 1000000000LL + mt_pre.tv_nsec));
if (interval < mStepCountPollTime) {
LOGV_IF(0/*ENG_VERBOSE*/,
"Step Count interval elapsed: %lld, triggered: %d",
interval, mStepCountPollTime);
return false;
} else {
clock_gettime(CLOCK_MONOTONIC, &mt_pre);
LOGV_IF(0/*ENG_VERBOSE*/, "Step Count previous time: %ld ms",
mt_pre.tv_nsec / 1000);
return true;
}
}
return false;
}
bool MPLSensor::hasPendingEvents(void) const
{
VFUNC_LOG;
// if we are using the polling workaround, force the main
// loop to check for data every time
return (mPollTime != -1);
}
/* TODO: support resume suspend when we gain more info about them*/
void MPLSensor::sleepEvent(void)
{
VFUNC_LOG;
}
void MPLSensor::wakeEvent(void)
{
VFUNC_LOG;
}
int MPLSensor::inv_float_to_q16(float *fdata, long *ldata)
{
//VFUNC_LOG;
if (!fdata || !ldata)
return -1;
ldata[0] = (long)(fdata[0] * 65536.f);
ldata[1] = (long)(fdata[1] * 65536.f);
ldata[2] = (long)(fdata[2] * 65536.f);
return 0;
}
int MPLSensor::inv_long_to_q16(long *fdata, long *ldata)
{
//VFUNC_LOG;
if (!fdata || !ldata)
return -1;
ldata[0] = (fdata[1] * 65536.f);
ldata[1] = (fdata[2] * 65536.f);
ldata[2] = (fdata[3] * 65536.f);
return 0;
}
int MPLSensor::inv_float_to_round(float *fdata, long *ldata)
{
VHANDLER_LOG;
if (!fdata || !ldata)
return -1;
ldata[0] = (long)fdata[0];
ldata[1] = (long)fdata[1];
ldata[2] = (long)fdata[2];
return 0;
}
int MPLSensor::inv_float_to_round2(float *fdata, short *ldata)
{
//VFUNC_LOG;
if (!fdata || !ldata)
return -1;
ldata[0] = (short)fdata[0];
ldata[1] = (short)fdata[1];
ldata[2] = (short)fdata[2];
return 0;
}
int MPLSensor::inv_long_to_float(long *ldata, float *fdata)
{
//VFUNC_LOG;
if (!ldata || !fdata)
return -1;
fdata[0] = (float)ldata[0];
fdata[1] = (float)ldata[1];
fdata[2] = (float)ldata[2];
return 0;
}
int MPLSensor::inv_read_temperature(long long *data)
{
VHANDLER_LOG;
int count = 0;
char raw_buf[40];
long raw = 0;
long long timestamp = 0;
memset(raw_buf, 0, sizeof(raw_buf));
count = read_attribute_sensor(gyro_temperature_fd, raw_buf,
sizeof(raw_buf));
if(count < 1) {
LOGE("HAL:error reading gyro temperature");
return -1;
}
count = sscanf(raw_buf, "%ld%lld", &raw, &timestamp);
if(count < 0) {
return -1;
}
LOGV_IF(ENG_VERBOSE,
"HAL:temperature raw = %ld, timestamp = %lld, count = %d",
raw, timestamp, count);
data[0] = raw;
data[1] = timestamp;
return 0;
}
int MPLSensor::inv_read_dmp_state(int fd)
{
VFUNC_LOG;
if(fd < 0)
return -1;
int count = 0;
char raw_buf[10];
short raw = 0;
memset(raw_buf, 0, sizeof(raw_buf));
count = read_attribute_sensor(fd, raw_buf, sizeof(raw_buf));
if(count < 1) {
LOGE("HAL:error reading dmp state");
close(fd);
return -1;
}
count = sscanf(raw_buf, "%hd", &raw);
if(count < 0) {
LOGE("HAL:dmp state data is invalid");
close(fd);
return -1;
}
LOGV_IF(EXTRA_VERBOSE, "HAL:dmp state = %d, count = %d", raw, count);
close(fd);
return (int)raw;
}
int MPLSensor::inv_read_sensor_bias(int fd, long *data)
{
VFUNC_LOG;
if(fd == -1) {
return -1;
}
char buf[50];
char x[15], y[15], z[15];
memset(buf, 0, sizeof(buf));
int count = read_attribute_sensor(fd, buf, sizeof(buf));
if(count < 1) {
LOGE("HAL:Error reading gyro bias");
return -1;
}
count = sscanf(buf, "%[^','],%[^','],%[^',']", x, y, z);
if(count) {
/* scale appropriately for MPL */
LOGV_IF(ENG_VERBOSE,
"HAL:pre-scaled bias: X:Y:Z (%ld, %ld, %ld)",
atol(x), atol(y), atol(z));
data[0] = (long)(atol(x) / 10000 * (1L << 16));
data[1] = (long)(atol(y) / 10000 * (1L << 16));
data[2] = (long)(atol(z) / 10000 * (1L << 16));
LOGV_IF(ENG_VERBOSE,
"HAL:scaled bias: X:Y:Z (%ld, %ld, %ld)",
data[0], data[1], data[2]);
}
return 0;
}
/** fill in the sensor list based on which sensors are configured.
* return the number of configured sensors.
* parameter list must point to a memory region of at least 7*sizeof(sensor_t)
* parameter len gives the length of the buffer pointed to by list
*/
int MPLSensor::populateSensorList(struct sensor_t *list, int len)
{
VFUNC_LOG;
int numsensors;
if(len <
(int)((sizeof(sSensorList) / sizeof(sensor_t)) * sizeof(sensor_t))) {
LOGE("HAL:sensor list too small, not populating.");
return -(sizeof(sSensorList) / sizeof(sensor_t));
}
/* fill in the base values */
memcpy(list, sSensorList,
sizeof (struct sensor_t) * (sizeof(sSensorList) / sizeof(sensor_t)));
/* first add gyro, accel and compass to the list */
/* fill in gyro/accel values */
// chip_ID is an array and will never equal to NULL.
//if(chip_ID == NULL) {
// LOGE("HAL:Can not get gyro/accel id");
//}
fillGyro(chip_ID, list);
fillAccel(chip_ID, list);
// TODO: need fixes for unified HAL and 3rd-party solution
mCompassSensor->fillList(&list[MagneticField]);
mCompassSensor->fillList(&list[RawMagneticField]);
if (mPressureSensor != NULL) {
mPressureSensor->fillList(&list[Pressure]);
}
if(1) {
numsensors = (sizeof(sSensorList) / sizeof(sensor_t));
/* all sensors will be added to the list
fill in orientation values */
fillOrientation(list);
/* fill in rotation vector values */
fillRV(list);
/* fill in game rotation vector values */
fillGRV(list);
/* fill in gravity values */
fillGravity(list);
/* fill in Linear accel values */
fillLinearAccel(list);
/* fill in Significant motion values */
fillSignificantMotion(list);
#ifdef ENABLE_DMP_SCREEN_AUTO_ROTATION
/* fill in screen orientation values */
fillScreenOrientation(list);
#endif
} else {
/* no 9-axis sensors, zero fill that part of the list */
numsensors = 3;
memset(list + 3, 0, 4 * sizeof(struct sensor_t));
}
return numsensors;
}
void MPLSensor::fillAccel(const char* accel, struct sensor_t *list)
{
VFUNC_LOG;
if (accel) {
if(accel != NULL && strcmp(accel, "BMA250") == 0) {
list[Accelerometer].maxRange = ACCEL_BMA250_RANGE;
list[Accelerometer].resolution = ACCEL_BMA250_RESOLUTION;
list[Accelerometer].power = ACCEL_BMA250_POWER;
list[Accelerometer].minDelay = ACCEL_BMA250_MINDELAY;
return;
} else if (accel != NULL && strcmp(accel, "MPU6050") == 0) {
list[Accelerometer].maxRange = ACCEL_MPU6050_RANGE;
list[Accelerometer].resolution = ACCEL_MPU6050_RESOLUTION;
list[Accelerometer].power = ACCEL_MPU6050_POWER;
list[Accelerometer].minDelay = ACCEL_MPU6050_MINDELAY;
return;
} else if (accel != NULL && strcmp(accel, "MPU6500") == 0) {
list[Accelerometer].maxRange = ACCEL_MPU6500_RANGE;
list[Accelerometer].resolution = ACCEL_MPU6500_RESOLUTION;
list[Accelerometer].power = ACCEL_MPU6500_POWER;
list[Accelerometer].minDelay = ACCEL_MPU6500_MINDELAY;
return;
} else if (accel != NULL && strcmp(accel, "MPU6515") == 0) {
list[Accelerometer].maxRange = ACCEL_MPU6500_RANGE;
list[Accelerometer].resolution = ACCEL_MPU6500_RESOLUTION;
list[Accelerometer].power = ACCEL_MPU6500_POWER;
list[Accelerometer].minDelay = ACCEL_MPU6500_MINDELAY;
return;
} else if (accel != NULL && strcmp(accel, "MPU6500") == 0) {
list[Accelerometer].maxRange = ACCEL_MPU6500_RANGE;
list[Accelerometer].resolution = ACCEL_MPU6500_RESOLUTION;
list[Accelerometer].power = ACCEL_MPU6500_POWER;
list[Accelerometer].minDelay = ACCEL_MPU6500_MINDELAY;
return;
} else if (accel != NULL && strcmp(accel, "MPU6500") == 0) {
list[Accelerometer].maxRange = ACCEL_MPU6500_RANGE;
list[Accelerometer].resolution = ACCEL_MPU6500_RESOLUTION;
list[Accelerometer].power = ACCEL_MPU6500_POWER;
list[Accelerometer].minDelay = ACCEL_MPU6500_MINDELAY;
return;
} else if (accel != NULL && strcmp(accel, "MPU9150") == 0) {
list[Accelerometer].maxRange = ACCEL_MPU9150_RANGE;
list[Accelerometer].resolution = ACCEL_MPU9150_RESOLUTION;
list[Accelerometer].power = ACCEL_MPU9150_POWER;
list[Accelerometer].minDelay = ACCEL_MPU9150_MINDELAY;
return;
} else if (accel != NULL && strcmp(accel, "MPU9250") == 0) {
list[Accelerometer].maxRange = ACCEL_MPU9250_RANGE;
list[Accelerometer].resolution = ACCEL_MPU9250_RESOLUTION;
list[Accelerometer].power = ACCEL_MPU9250_POWER;
list[Accelerometer].minDelay = ACCEL_MPU9250_MINDELAY;
return;
} else if (accel != NULL && strcmp(accel, "MPU9350") == 0) {
list[Accelerometer].maxRange = ACCEL_MPU9350_RANGE;
list[Accelerometer].resolution = ACCEL_MPU9350_RESOLUTION;
list[Accelerometer].power = ACCEL_MPU9350_POWER;
list[Accelerometer].minDelay = ACCEL_MPU9350_MINDELAY;
return;
} else if (accel != NULL && strcmp(accel, "MPU3050") == 0) {
list[Accelerometer].maxRange = ACCEL_BMA250_RANGE;
list[Accelerometer].resolution = ACCEL_BMA250_RESOLUTION;
list[Accelerometer].power = ACCEL_BMA250_POWER;
list[Accelerometer].minDelay = ACCEL_BMA250_MINDELAY;
return;
}
}
LOGE("HAL:unknown accel id %s -- "
"params default to bma250 and might be wrong.",
accel);
list[Accelerometer].maxRange = ACCEL_BMA250_RANGE;
list[Accelerometer].resolution = ACCEL_BMA250_RESOLUTION;
list[Accelerometer].power = ACCEL_BMA250_POWER;
list[Accelerometer].minDelay = ACCEL_BMA250_MINDELAY;
}
void MPLSensor::fillGyro(const char* gyro, struct sensor_t *list)
{
VFUNC_LOG;
if ( gyro != NULL && strcmp(gyro, "MPU3050") == 0) {
list[Gyro].maxRange = GYRO_MPU3050_RANGE;
list[Gyro].resolution = GYRO_MPU3050_RESOLUTION;
list[Gyro].power = GYRO_MPU3050_POWER;
list[Gyro].minDelay = GYRO_MPU3050_MINDELAY;
} else if( gyro != NULL && strcmp(gyro, "MPU6050") == 0) {
list[Gyro].maxRange = GYRO_MPU6050_RANGE;
list[Gyro].resolution = GYRO_MPU6050_RESOLUTION;
list[Gyro].power = GYRO_MPU6050_POWER;
list[Gyro].minDelay = GYRO_MPU6050_MINDELAY;
} else if( gyro != NULL && strcmp(gyro, "MPU6500") == 0) {
list[Gyro].maxRange = GYRO_MPU6500_RANGE;
list[Gyro].resolution = GYRO_MPU6500_RESOLUTION;
list[Gyro].power = GYRO_MPU6500_POWER;
list[Gyro].minDelay = GYRO_MPU6500_MINDELAY;
} else if( gyro != NULL && strcmp(gyro, "MPU6515") == 0) {
list[Gyro].maxRange = GYRO_MPU6500_RANGE;
list[Gyro].resolution = GYRO_MPU6500_RESOLUTION;
list[Gyro].power = GYRO_MPU6500_POWER;
list[Gyro].minDelay = GYRO_MPU6500_MINDELAY;
} else if( gyro != NULL && strcmp(gyro, "MPU9150") == 0) {
list[Gyro].maxRange = GYRO_MPU9150_RANGE;
list[Gyro].resolution = GYRO_MPU9150_RESOLUTION;
list[Gyro].power = GYRO_MPU9150_POWER;
list[Gyro].minDelay = GYRO_MPU9150_MINDELAY;
} else if( gyro != NULL && strcmp(gyro, "MPU9250") == 0) {
list[Gyro].maxRange = GYRO_MPU9250_RANGE;
list[Gyro].resolution = GYRO_MPU9250_RESOLUTION;
list[Gyro].power = GYRO_MPU9250_POWER;
list[Gyro].minDelay = GYRO_MPU9250_MINDELAY;
} else if( gyro != NULL && strcmp(gyro, "MPU9350") == 0) {
list[Gyro].maxRange = GYRO_MPU9350_RANGE;
list[Gyro].resolution = GYRO_MPU9350_RESOLUTION;
list[Gyro].power = GYRO_MPU9350_POWER;
list[Gyro].minDelay = GYRO_MPU9350_MINDELAY;
} else {
LOGE("HAL:unknown gyro id -- gyro params will be wrong.");
LOGE("HAL:default to use mpu3050 params");
list[Gyro].maxRange = GYRO_MPU3050_RANGE;
list[Gyro].resolution = GYRO_MPU3050_RESOLUTION;
list[Gyro].power = GYRO_MPU3050_POWER;
list[Gyro].minDelay = GYRO_MPU3050_MINDELAY;
}
list[RawGyro].maxRange = list[Gyro].maxRange;
list[RawGyro].resolution = list[Gyro].resolution;
list[RawGyro].power = list[Gyro].power;
list[RawGyro].minDelay = list[Gyro].minDelay;
return;
}
/* fillRV depends on values of gyro, accel and compass in the list */
void MPLSensor::fillRV(struct sensor_t *list)
{
VFUNC_LOG;
/* compute power on the fly */
list[RotationVector].power = list[Gyro].power +
list[Accelerometer].power +
list[MagneticField].power;
list[RotationVector].resolution = .00001;
list[RotationVector].maxRange = 1.0;
list[RotationVector].minDelay = 5000;
return;
}
/* fillGMRV depends on values of accel and mag in the list */
void MPLSensor::fillGMRV(struct sensor_t *list)
{
VFUNC_LOG;
/* compute power on the fly */
list[GeomagneticRotationVector].power = list[Accelerometer].power +
list[MagneticField].power;
list[GeomagneticRotationVector].resolution = .00001;
list[GeomagneticRotationVector].maxRange = 1.0;
list[GeomagneticRotationVector].minDelay = 5000;
return;
}
/* fillGRV depends on values of gyro and accel in the list */
void MPLSensor::fillGRV(struct sensor_t *list)
{
VFUNC_LOG;
/* compute power on the fly */
list[GameRotationVector].power = list[Gyro].power +
list[Accelerometer].power;
list[GameRotationVector].resolution = .00001;
list[GameRotationVector].maxRange = 1.0;
list[GameRotationVector].minDelay = 5000;
return;
}
void MPLSensor::fillOrientation(struct sensor_t *list)
{
VFUNC_LOG;
list[Orientation].power = list[Gyro].power +
list[Accelerometer].power +
list[MagneticField].power;
list[Orientation].resolution = .00001;
list[Orientation].maxRange = 360.0;
list[Orientation].minDelay = 5000;
return;
}
void MPLSensor::fillGravity( struct sensor_t *list)
{
VFUNC_LOG;
list[Gravity].power = list[Gyro].power +
list[Accelerometer].power +
list[MagneticField].power;
list[Gravity].resolution = .00001;
list[Gravity].maxRange = 9.81;
list[Gravity].minDelay = 5000;
return;
}
void MPLSensor::fillLinearAccel(struct sensor_t *list)
{
VFUNC_LOG;
list[LinearAccel].power = list[Gyro].power +
list[Accelerometer].power +
list[MagneticField].power;
list[LinearAccel].resolution = list[Accelerometer].resolution;
list[LinearAccel].maxRange = list[Accelerometer].maxRange;
list[LinearAccel].minDelay = 5000;
return;
}
void MPLSensor::fillSignificantMotion(struct sensor_t *list)
{
VFUNC_LOG;
list[SignificantMotion].power = list[Accelerometer].power;
list[SignificantMotion].resolution = 1;
list[SignificantMotion].maxRange = 1;
list[SignificantMotion].minDelay = -1;
}
#ifdef ENABLE_DMP_SCREEN_AUTO_ROTATION
void MPLSensor::fillScreenOrientation(struct sensor_t *list)
{
VFUNC_LOG;
list[NumSensors].power = list[Accelerometer].power;
list[NumSensors].resolution = 1;
list[NumSensors].maxRange = 3;
list[NumSensors].minDelay = 0;
}
#endif
int MPLSensor::inv_init_sysfs_attributes(void)
{
VFUNC_LOG;
char sysfs_path[MAX_SYSFS_NAME_LEN];
memset(sysfs_path, 0, sizeof(sysfs_path));
sysfs_names_ptr = (char*)calloc(MAX_SYSFS_ATTRB,
sizeof(char[MAX_SYSFS_NAME_LEN]));
if (sysfs_names_ptr == NULL) {
LOGE("HAL:couldn't alloc mem for sysfs paths");
return -1;
}
char *sptr = sysfs_names_ptr;
char **dptr = reinterpret_cast<char **>(&mpu);
for (size_t i = 0; i < MAX_SYSFS_ATTRB; i++) {
*dptr++ = sptr;
sptr += sizeof(char[MAX_SYSFS_NAME_LEN]);
}
// get proper (in absolute) IIO path & build MPU's sysfs paths
inv_get_sysfs_path(sysfs_path);
if (strcmp(sysfs_path, "") == 0)
return 0;
memcpy(mSysfsPath, sysfs_path, sizeof(sysfs_path));
sprintf(mpu.key, "%s%s", sysfs_path, "/key");
sprintf(mpu.chip_enable, "%s%s", sysfs_path, "/buffer/enable");
sprintf(mpu.buffer_length, "%s%s", sysfs_path, "/buffer/length");
sprintf(mpu.master_enable, "%s%s", sysfs_path, "/master_enable");
sprintf(mpu.power_state, "%s%s", sysfs_path, "/power_state");
sprintf(mpu.in_timestamp_en, "%s%s", sysfs_path,
"/scan_elements/in_timestamp_en");
sprintf(mpu.in_timestamp_index, "%s%s", sysfs_path,
"/scan_elements/in_timestamp_index");
sprintf(mpu.in_timestamp_type, "%s%s", sysfs_path,
"/scan_elements/in_timestamp_type");
sprintf(mpu.dmp_firmware, "%s%s", sysfs_path, "/dmp_firmware");
sprintf(mpu.firmware_loaded, "%s%s", sysfs_path, "/firmware_loaded");
sprintf(mpu.dmp_on, "%s%s", sysfs_path, "/dmp_on");
sprintf(mpu.dmp_int_on, "%s%s", sysfs_path, "/dmp_int_on");
sprintf(mpu.dmp_event_int_on, "%s%s", sysfs_path, "/dmp_event_int_on");
sprintf(mpu.tap_on, "%s%s", sysfs_path, "/tap_on");
sprintf(mpu.self_test, "%s%s", sysfs_path, "/self_test");
sprintf(mpu.temperature, "%s%s", sysfs_path, "/temperature");
sprintf(mpu.gyro_enable, "%s%s", sysfs_path, "/gyro_enable");
sprintf(mpu.gyro_fifo_rate, "%s%s", sysfs_path, "/sampling_frequency");
sprintf(mpu.gyro_orient, "%s%s", sysfs_path, "/gyro_matrix");
sprintf(mpu.gyro_fifo_enable, "%s%s", sysfs_path, "/gyro_fifo_enable");
sprintf(mpu.gyro_fsr, "%s%s", sysfs_path, "/in_anglvel_scale");
sprintf(mpu.gyro_fifo_enable, "%s%s", sysfs_path, "/gyro_fifo_enable");
sprintf(mpu.gyro_rate, "%s%s", sysfs_path, "/gyro_rate");
sprintf(mpu.accel_enable, "%s%s", sysfs_path, "/accel_enable");
sprintf(mpu.accel_fifo_rate, "%s%s", sysfs_path, "/sampling_frequency");
sprintf(mpu.accel_orient, "%s%s", sysfs_path, "/accel_matrix");
sprintf(mpu.accel_fifo_enable, "%s%s", sysfs_path, "/accel_fifo_enable");
sprintf(mpu.accel_rate, "%s%s", sysfs_path, "/accel_rate");
#ifndef THIRD_PARTY_ACCEL //MPUxxxx
sprintf(mpu.accel_fsr, "%s%s", sysfs_path, "/in_accel_scale");
// DMP uses these values
sprintf(mpu.in_accel_x_dmp_bias, "%s%s", sysfs_path, "/in_accel_x_dmp_bias");
sprintf(mpu.in_accel_y_dmp_bias, "%s%s", sysfs_path, "/in_accel_y_dmp_bias");
sprintf(mpu.in_accel_z_dmp_bias, "%s%s", sysfs_path, "/in_accel_z_dmp_bias");
// MPU uses these values
sprintf(mpu.in_accel_x_offset, "%s%s", sysfs_path, "/in_accel_x_offset");
sprintf(mpu.in_accel_y_offset, "%s%s", sysfs_path, "/in_accel_y_offset");
sprintf(mpu.in_accel_z_offset, "%s%s", sysfs_path, "/in_accel_z_offset");
sprintf(mpu.in_accel_self_test_scale, "%s%s", sysfs_path, "/in_accel_self_test_scale");
#endif
// DMP uses these bias values
sprintf(mpu.in_gyro_x_dmp_bias, "%s%s", sysfs_path, "/in_anglvel_x_dmp_bias");
sprintf(mpu.in_gyro_y_dmp_bias, "%s%s", sysfs_path, "/in_anglvel_y_dmp_bias");
sprintf(mpu.in_gyro_z_dmp_bias, "%s%s", sysfs_path, "/in_anglvel_z_dmp_bias");
// MPU uses these bias values
sprintf(mpu.in_gyro_x_offset, "%s%s", sysfs_path, "/in_anglvel_x_offset");
sprintf(mpu.in_gyro_y_offset, "%s%s", sysfs_path, "/in_anglvel_y_offset");
sprintf(mpu.in_gyro_z_offset, "%s%s", sysfs_path, "/in_anglvel_z_offset");
sprintf(mpu.in_gyro_self_test_scale, "%s%s", sysfs_path, "/in_anglvel_self_test_scale");
sprintf(mpu.three_axis_q_on, "%s%s", sysfs_path, "/three_axes_q_on"); //formerly quaternion_on
sprintf(mpu.three_axis_q_rate, "%s%s", sysfs_path, "/three_axes_q_rate");
sprintf(mpu.ped_q_on, "%s%s", sysfs_path, "/ped_q_on");
sprintf(mpu.ped_q_rate, "%s%s", sysfs_path, "/ped_q_rate");
sprintf(mpu.six_axis_q_on, "%s%s", sysfs_path, "/six_axes_q_on");
sprintf(mpu.six_axis_q_rate, "%s%s", sysfs_path, "/six_axes_q_rate");
sprintf(mpu.six_axis_q_value, "%s%s", sysfs_path, "/six_axes_q_value");
sprintf(mpu.step_detector_on, "%s%s", sysfs_path, "/step_detector_on");
sprintf(mpu.step_indicator_on, "%s%s", sysfs_path, "/step_indicator_on");
sprintf(mpu.display_orientation_on, "%s%s", sysfs_path,
"/display_orientation_on");
sprintf(mpu.event_display_orientation, "%s%s", sysfs_path,
"/event_display_orientation");
sprintf(mpu.event_smd, "%s%s", sysfs_path,
"/event_smd");
sprintf(mpu.smd_enable, "%s%s", sysfs_path,
"/smd_enable");
sprintf(mpu.smd_delay_threshold, "%s%s", sysfs_path,
"/smd_delay_threshold");
sprintf(mpu.smd_delay_threshold2, "%s%s", sysfs_path,
"/smd_delay_threshold2");
sprintf(mpu.smd_threshold, "%s%s", sysfs_path,
"/smd_threshold");
sprintf(mpu.batchmode_timeout, "%s%s", sysfs_path,
"/batchmode_timeout");
sprintf(mpu.batchmode_wake_fifo_full_on, "%s%s", sysfs_path,
"/batchmode_wake_fifo_full_on");
sprintf(mpu.flush_batch, "%s%s", sysfs_path,
"/flush_batch");
sprintf(mpu.pedometer_on, "%s%s", sysfs_path,
"/pedometer_on");
sprintf(mpu.pedometer_int_on, "%s%s", sysfs_path,
"/pedometer_int_on");
sprintf(mpu.event_pedometer, "%s%s", sysfs_path,
"/event_pedometer");
sprintf(mpu.pedometer_steps, "%s%s", sysfs_path,
"/pedometer_steps");
sprintf(mpu.motion_lpa_on, "%s%s", sysfs_path,
"/motion_lpa_on");
return 0;
}
bool MPLSensor::isMpuNonDmp(void)
{
VFUNC_LOG;
if (!strcmp(chip_ID, "mpu3050") || !strcmp(chip_ID, "MPU3050"))
return true;
else
return false;
}
int MPLSensor::isLowPowerQuatEnabled(void)
{
VFUNC_LOG;
#ifdef ENABLE_LP_QUAT_FEAT
return !isMpuNonDmp();
#else
return 0;
#endif
}
int MPLSensor::isDmpDisplayOrientationOn(void)
{
VFUNC_LOG;
#ifdef ENABLE_DMP_DISPL_ORIENT_FEAT
if (isMpuNonDmp())
return 0;
return 1;
#else
return 0;
#endif
}
/* these functions can be consolidated
with inv_convert_to_body_with_scale */
void MPLSensor::getCompassBias()
{
VFUNC_LOG;
long bias[3];
long compassBias[3];
unsigned short orient;
signed char orientMtx[9];
mCompassSensor->getOrientationMatrix(orientMtx);
orient = inv_orientation_matrix_to_scalar(orientMtx);
/* Get Values from MPL */
inv_get_compass_bias(bias);
//inv_convert_to_body_with_scale(unsigned short orientation, long sensitivity, const long *input, long *output);
inv_convert_to_body(orient, bias, compassBias);
LOGV_IF(HANDLER_DATA, "Mpl Compass Bias (HW unit) %ld %ld %ld", bias[0], bias[1], bias[2]);
LOGV_IF(HANDLER_DATA, "Mpl Compass Bias (HW unit) (body) %ld %ld %ld", compassBias[0], compassBias[1], compassBias[2]);
long compassSensitivity = inv_get_compass_sensitivity();
if (compassSensitivity == 0) {
compassSensitivity = mCompassScale;
}
for(int i=0; i<3; i++) {
/* convert to uT */
float temp = (float) compassSensitivity / (1L << 30);
mCompassBias[i] =(float) (compassBias[i] * temp / 65536.f);
}
return;
}
void MPLSensor::getFactoryGyroBias()
{
VFUNC_LOG;
//TODO: mllite needs to add this function
//if(inv_factory_bias_available) {
/* Get Values from MPL */
inv_get_gyro_bias(mFactoryGyroBias);
LOGV_IF(ENG_VERBOSE, "Factory Gyro Bias %ld %ld %ld", mFactoryGyroBias[0], mFactoryGyroBias[1], mFactoryGyroBias[2]);
mFactoryGyroBiasAvailable = true;
//}
return;
}
/* set bias from factory cal file to MPU offset (in chip frame)
x = values store in cal file --> (v/1000 * 2^16 / (2000/250))
offset = x/2^16 * (Gyro scale / self test scale used) * (-1) / offset scale
i.e. self test default scale = 250
gyro scale default to = 2000
offset scale = 4 //as spec by hardware
offset = x/2^16 * (8) * (-1) / (4)
*/
void MPLSensor::setFactoryGyroBias()
{
VFUNC_LOG;
int scaleRatio = mGyroScale / mGyroSelfTestScale;
int offsetScale = 4;
LOGV_IF(ENG_VERBOSE, "HAL: scaleRatio used =%d", scaleRatio);
LOGV_IF(ENG_VERBOSE, "HAL: offsetScale used =%d", offsetScale);
/* Write to Driver */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
(((int) (((float) mFactoryGyroBias[0]) / 65536.f * scaleRatio)) * -1 / offsetScale),
mpu.in_gyro_x_offset, getTimestamp());
if(write_attribute_sensor_continuous(gyro_x_offset_fd,
(((int) (((float) mFactoryGyroBias[0]) / 65536.f * scaleRatio)) * -1 / offsetScale)) < 0)
{
LOGE("HAL:Error writing to gyro_x_offset");
return;
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
(((int) (((float) mFactoryGyroBias[1]) / 65536.f * scaleRatio)) * -1 / offsetScale),
mpu.in_gyro_y_offset, getTimestamp());
if(write_attribute_sensor_continuous(gyro_y_offset_fd,
(((int) (((float) mFactoryGyroBias[1]) / 65536.f * scaleRatio)) * -1 / offsetScale)) < 0)
{
LOGE("HAL:Error writing to gyro_y_offset");
return;
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
(((int) (((float) mFactoryGyroBias[2]) / 65536.f * scaleRatio)) * -1 / offsetScale),
mpu.in_gyro_z_offset, getTimestamp());
if(write_attribute_sensor_continuous(gyro_z_offset_fd,
(((int) (((float) mFactoryGyroBias[2]) / 65536.f * scaleRatio)) * -1 / offsetScale)) < 0)
{
LOGE("HAL:Error writing to gyro_z_offset");
return;
}
mFactoryGyroBiasAvailable = false;
LOGV_IF(EXTRA_VERBOSE, "HAL:Factory Gyro Calibrated Bias Applied");
return;
}
/* these functions can be consolidated
with inv_convert_to_body_with_scale */
void MPLSensor::getGyroBias()
{
VFUNC_LOG;
long *temp = NULL;
long bias[3];
unsigned short orient;
/* Get Values from MPL */
inv_get_mpl_gyro_bias(mGyroChipBias, temp);
orient = inv_orientation_matrix_to_scalar(mGyroOrientation);
//void inv_convert_to_body_with_scale(unsigned short orientation, long sensitivity, const long *input, long *output);
inv_convert_to_body(orient, mGyroChipBias, bias);
LOGV_IF(ENG_VERBOSE, "Mpl Gyro Bias (HW unit) %ld %ld %ld", mGyroChipBias[0], mGyroChipBias[1], mGyroChipBias[2]);
LOGV_IF(ENG_VERBOSE, "Mpl Gyro Bias (HW unit) (body) %ld %ld %ld", bias[0], bias[1], bias[2]);
long gyroSensitivity = inv_get_gyro_sensitivity();
if(gyroSensitivity == 0) {
gyroSensitivity = mGyroScale;
}
/* scale and convert to rad */
for(int i=0; i<3; i++) {
float temp = (float) gyroSensitivity / (1L << 30);
mGyroBias[i] = (float) (bias[i] * temp / (1<<16) / 180 * M_PI);
if (mGyroBias[i] != 0)
mGyroBiasAvailable = true;
}
return;
}
void MPLSensor::setGyroBias()
{
VFUNC_LOG;
if(mGyroBiasAvailable == false)
return;
long bias[3];
long gyroSensitivity = inv_get_gyro_sensitivity();
if(gyroSensitivity == 0) {
gyroSensitivity = mGyroScale;
}
inv_get_gyro_bias_dmp_units(bias);
/* Write to Driver */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %ld > %s (%lld)",
bias[0], mpu.in_gyro_x_dmp_bias, getTimestamp());
if(write_attribute_sensor_continuous(gyro_x_dmp_bias_fd, bias[0]) < 0) {
LOGE("HAL:Error writing to gyro_x_dmp_bias");
return;
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %ld > %s (%lld)",
bias[1], mpu.in_gyro_y_dmp_bias, getTimestamp());
if(write_attribute_sensor_continuous(gyro_y_dmp_bias_fd, bias[1]) < 0) {
LOGE("HAL:Error writing to gyro_y_dmp_bias");
return;
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %ld > %s (%lld)",
bias[2], mpu.in_gyro_z_dmp_bias, getTimestamp());
if(write_attribute_sensor_continuous(gyro_z_dmp_bias_fd, bias[2]) < 0) {
LOGE("HAL:Error writing to gyro_z_dmp_bias");
return;
}
mGyroBiasApplied = true;
mGyroBiasAvailable = false;
LOGV_IF(EXTRA_VERBOSE, "HAL:Gyro DMP Calibrated Bias Applied");
return;
}
void MPLSensor::getFactoryAccelBias()
{
VFUNC_LOG;
/* Get Values from MPL */
inv_get_accel_bias(mFactoryAccelBias);
LOGV_IF(ENG_VERBOSE, "Factory Accel Bias (mg) %ld %ld %ld", mFactoryAccelBias[0], mFactoryAccelBias[1], mFactoryAccelBias[2]);
mFactoryAccelBiasAvailable = true;
return;
}
void MPLSensor::setFactoryAccelBias()
{
VFUNC_LOG;
if(mFactoryAccelBiasAvailable == false)
return;
/* add scaling here - depends on self test parameters */
int scaleRatio = mAccelScale / mAccelSelfTestScale;
int offsetScale = 16;
long tempBias;
LOGV_IF(ENG_VERBOSE, "HAL: scaleRatio used =%d", scaleRatio);
LOGV_IF(ENG_VERBOSE, "HAL: offsetScale used =%d", offsetScale);
/* Write to Driver */
tempBias = -mFactoryAccelBias[0] / 65536.f * scaleRatio / offsetScale;
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %ld > %s (%lld)",
tempBias, mpu.in_accel_x_offset, getTimestamp());
if(write_attribute_sensor_continuous(accel_x_offset_fd, tempBias) < 0) {
LOGE("HAL:Error writing to accel_x_offset");
return;
}
tempBias = -mFactoryAccelBias[1] / 65536.f * scaleRatio / offsetScale;
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %ld > %s (%lld)",
tempBias, mpu.in_accel_y_offset, getTimestamp());
if(write_attribute_sensor_continuous(accel_y_offset_fd, tempBias) < 0) {
LOGE("HAL:Error writing to accel_y_offset");
return;
}
tempBias = -mFactoryAccelBias[2] / 65536.f * scaleRatio / offsetScale;
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %ld > %s (%lld)",
tempBias, mpu.in_accel_z_offset, getTimestamp());
if(write_attribute_sensor_continuous(accel_z_offset_fd, tempBias) < 0) {
LOGE("HAL:Error writing to accel_z_offset");
return;
}
mFactoryAccelBiasAvailable = false;
LOGV_IF(EXTRA_VERBOSE, "HAL:Factory Accel Calibrated Bias Applied");
return;
}
void MPLSensor::getAccelBias()
{
VFUNC_LOG;
long temp;
/* Get Values from MPL */
inv_get_mpl_accel_bias(mAccelBias, &temp);
LOGV_IF(ENG_VERBOSE, "Accel Bias (mg) %ld %ld %ld",
mAccelBias[0], mAccelBias[1], mAccelBias[2]);
mAccelBiasAvailable = true;
return;
}
/* set accel bias obtained from MPL
bias is scaled by 65536 from MPL
DMP expects: bias * 536870912 / 2^30 = bias / 2 (in body frame)
*/
void MPLSensor::setAccelBias()
{
VFUNC_LOG;
if(mAccelBiasAvailable == false) {
LOGV_IF(ENG_VERBOSE, "HAL: setAccelBias - accel bias not available");
return;
}
/*
long bias[3];
unsigned short orient = inv_orientation_matrix_to_scalar(mAccelOrientation);
inv_convert_to_body(orient, mAccelBias, bias);
*/
/* write to driver */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %ld > %s (%lld)",
(long) (mAccelBias[0] / 65536.f / 2),
mpu.in_accel_x_dmp_bias, getTimestamp());
if(write_attribute_sensor_continuous(
accel_x_dmp_bias_fd, (long)(mAccelBias[0] / 65536.f / 2)) < 0) {
LOGE("HAL:Error writing to accel_x_dmp_bias");
return;
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %ld > %s (%lld)",
(long)(mAccelBias[1] / 65536.f / 2),
mpu.in_accel_y_dmp_bias, getTimestamp());
if(write_attribute_sensor_continuous(
accel_y_dmp_bias_fd, (long)(mAccelBias[1] / 65536.f / 2)) < 0) {
LOGE("HAL:Error writing to accel_y_dmp_bias");
return;
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %ld > %s (%lld)",
(long)(mAccelBias[2] / 65536 / 2),
mpu.in_accel_z_dmp_bias, getTimestamp());
if(write_attribute_sensor_continuous(
accel_z_dmp_bias_fd, (long)(mAccelBias[2] / 65536 / 2)) < 0) {
LOGE("HAL:Error writing to accel_z_dmp_bias");
return;
}
mAccelBiasAvailable = false;
mAccelBiasApplied = true;
LOGV_IF(EXTRA_VERBOSE, "HAL:Accel DMP Calibrated Bias Applied");
return;
}
int MPLSensor::isCompassDisabled(void)
{
VFUNC_LOG;
if(mCompassSensor->getFd() < 0 && !mCompassSensor->isIntegrated()) {
LOGI_IF(EXTRA_VERBOSE, "HAL: Compass is disabled, Six-axis Sensor Fusion is used.");
return 1;
}
return 0;
}
int MPLSensor::checkBatchEnabled(void)
{
VFUNC_LOG;
return ((mFeatureActiveMask & INV_DMP_BATCH_MODE)? 1:0);
}
/* precondition: framework disallows this case, ie enable continuous sensor, */
/* and enable batch sensor */
/* if one sensor is in continuous mode, HAL disallows enabling batch for this sensor */
/* or any other sensors */
#define DEBUG_BATCHING (0)
int MPLSensor::batch(int handle, int flags, int64_t period_ns, int64_t timeout)
{
VFUNC_LOG;
int res = 0;
if (isMpuNonDmp())
return res;
/* Enables batch mode and sets timeout for the given sensor */
/* enum SENSORS_BATCH_DRY_RUN, SENSORS_BATCH_WAKE_UPON_FIFO_FULL */
bool dryRun = false;
android::String8 sname;
int what = -1;
int enabled_sensors = mEnabled;
int batchMode = timeout > 0 ? 1 : 0;
LOGI_IF(DEBUG_BATCHING || ENG_VERBOSE,
"HAL:batch called - handle=%d, flags=%d, period=%lld, timeout=%lld",
handle, flags, period_ns, timeout);
if(flags & (1 << SENSORS_BATCH_DRY_RUN)) {
dryRun = true;
LOGI_IF(PROCESS_VERBOSE,
"HAL:batch - dry run mode is set (%d)", SENSORS_BATCH_DRY_RUN);
}
getHandle(handle, what, sname);
if(uint32_t(what) >= NumSensors) {
LOGE("HAL:batch sensors %d not found", what);
return -EINVAL;
}
switch (what) {
case Gyro:
case RawGyro:
case Accelerometer:
case MagneticField:
case RawMagneticField:
case Pressure:
case GameRotationVector:
case StepDetector:
LOGV_IF(PROCESS_VERBOSE, "HAL: batch - select sensor (handle %d)", handle);
break;
default:
if (timeout > 0) {
LOGV_IF(PROCESS_VERBOSE, "sensor (handle %d) is not supported in batch mode", handle);
return -EINVAL;
}
}
int tempBatch = 0;
if (timeout > 0) {
tempBatch = mBatchEnabled | (1 << what);
} else {
tempBatch = mBatchEnabled & ~(1 << what);
}
if (!computeBatchSensorMask(mEnabled, tempBatch)) {
batchMode = 0;
} else {
batchMode = 1;
}
/* get maximum possible bytes to batch per sample */
/* get minimum delay for each requested sensor */
ssize_t nBytes = 0;
int64_t wanted = 1000000000LL, ns = 0;
int64_t timeoutInMs = 0;
for (int i = 0; i < NumSensors; i++) {
if (batchMode == 1) {
ns = mBatchDelays[i];
LOGV_IF(DEBUG_BATCHING || EXTRA_VERBOSE,
"HAL:batch - requested sensor=0x%01x, batch delay=%lld", mEnabled & (1 << i), ns);
// take the min delay ==> max rate
wanted = (ns < wanted) ? ns : wanted;
if (i <= RawMagneticField) {
nBytes += 8;
}
if (i == Pressure) {
nBytes += 6;
}
if ((i == StepDetector) || (i == GameRotationVector)) {
nBytes += 16;
}
}
}
/* check if we can support issuing interrupt before FIFO fills-up */
/* in the given timeout. */
if (flags & (1 << SENSORS_BATCH_WAKE_UPON_FIFO_FULL)) {
LOGE("HAL: batch SENSORS_BATCH_WAKE_UPON_FIFO_FULL is not supported");
return -EINVAL;
/* provide messge if it exceeds hardware capability
if (nSamples * nBytes >= 1024) {
LOGE("HAL:batch - timeout - configuration is not supported, "
"cannot provide requested amount of buffering (%lld ms)",
timeout / 1000000LL);
}*/
}
if(dryRun == true)
return 0;
/* starting from code below, we will modify hardware */
/* first edit global batch mode mask */
if (!timeout) {
mBatchEnabled &= ~(1 << what);
mBatchDelays[what] = 1000000000L;
mBatchTimeouts[what] = 100000000000LL;
} else {
mBatchEnabled |= (1 << what);
mBatchDelays[what] = period_ns;
mBatchTimeouts[what] = timeout;
}
/* set mask used by other functions */
mOldBatchEnabledMask = batchMode;
/* For these sensors, switch to different data output */
/* These steps should be optimized at some point */
int featureMask = computeBatchDataOutput();
LOGV_IF(ENG_VERBOSE, "batchMode =%d, featureMask=0x%x, mEnabled=%d",
batchMode, featureMask, mEnabled);
if (DEBUG_BATCHING || EXTRA_VERBOSE) {
LOGV("HAL:batch - sensor=0x%01x", mBatchEnabled);
for (int d = 0; d < NumSensors; d++) {
LOGV("HAL:batch - sensor status=0x%01x batch status=0x%01x timeout=%lld delay=%lld",
mEnabled & (1 << d), (mBatchEnabled & (1 << d)), mBatchTimeouts[d],
mBatchDelays[d]);
}
}
/* take the minimum batchmode timeout */
if (batchMode == 1) {
int64_t tempTimeout = 100000000000LL;
for (int i = 0; i < NumSensors; i++) {
if ((mEnabled & (1 << i) && mBatchEnabled & (1 << i)) ||
(((featureMask & INV_DMP_PED_STANDALONE) && (mBatchEnabled & (1 << StepDetector))))) {
LOGV_IF(ENG_VERBOSE, "i=%d, timeout=%lld", i, mBatchTimeouts[i]);
ns = mBatchTimeouts[i];
tempTimeout = (ns < tempTimeout) ? ns : tempTimeout;
}
}
timeout = tempTimeout;
/* Convert ns to millisecond */
timeoutInMs = timeout / 1000000;
/* remember last timeout value */
mBatchTimeoutInMs = timeoutInMs;
/* TODO: Calculate nSamples */
/* int nSamples = 0;
nSamples = (unsigned long)(
(1000000000.f / wanted) * ((float)timeout / 1000000000.f)); */
} else {
timeoutInMs = 0;
}
LOGV_IF(DEBUG_BATCHING || EXTRA_VERBOSE,
"HAL:batch - timeout - timeout=%lld ns, timeoutInMs=%lld, delay=%lld ns",
timeout, timeoutInMs, wanted);
// reset master enable
res = masterEnable(0);
if (res < 0) {
return res;
}
/* case for Ped standalone */
if ((batchMode == 1) && (featureMask & INV_DMP_PED_STANDALONE) &&
(mFeatureActiveMask & INV_DMP_PEDOMETER)) {
LOGI("ID_P only = 0x%x", mBatchEnabled);
enablePedQuaternion(0);
enablePedStandalone(1);
} else {
enablePedStandalone(0);
if (featureMask & INV_DMP_PED_QUATERNION) {
enableLPQuaternion(0);
enablePedQuaternion(1);
}
}
/* case for Ped Quaternion */
if ((batchMode == 1) && (featureMask & INV_DMP_PED_QUATERNION) &&
(mEnabled & (1 << GameRotationVector)) &&
(mFeatureActiveMask & INV_DMP_PEDOMETER)) {
LOGI("ID_P and GRV or ALL = 0x%x", mBatchEnabled);
LOGI("ID_P is enabled for batching, PED quat will be automatically enabled");
enableLPQuaternion(0);
enablePedQuaternion(1);
wanted = mBatchDelays[GameRotationVector];
/* set pedq rate */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
int(1000000000.f / wanted), mpu.ped_q_rate,
getTimestamp());
write_sysfs_int(mpu.ped_q_rate, 1000000000.f / wanted);
LOGV_IF(PROCESS_VERBOSE,
"HAL:DMP ped quaternion rate %.2f Hz", 1000000000.f / wanted);
} else if (!(featureMask & INV_DMP_PED_STANDALONE)){
LOGV_IF(ENG_VERBOSE, "Toggle back to normal 6 axis");
if (mEnabled & (1 << GameRotationVector) && checkLPQRateSupported()) {
enableLPQuaternion(1);
}
enablePedQuaternion(0);
}
/* case for Ped indicator */
if ((batchMode == 1) && ((featureMask & INV_DMP_PED_INDICATOR))) {
enablePedIndicator(1);
} else {
enablePedIndicator(0);
}
/* case for Six Axis Quaternion */
if ((batchMode == 1) && (featureMask & INV_DMP_6AXIS_QUATERNION) &&
(mEnabled & (1 << GameRotationVector))) {
LOGI("GRV = 0x%x", mBatchEnabled);
enableLPQuaternion(0);
enable6AxisQuaternion(1);
if (what == GameRotationVector) {
setInitial6QuatValue();
}
wanted = mBatchDelays[GameRotationVector];
/* set sixaxis rate */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
int(1000000000.f / wanted), mpu.six_axis_q_rate,
getTimestamp());
write_sysfs_int(mpu.six_axis_q_rate, 1000000000.f / wanted);
LOGV_IF(PROCESS_VERBOSE,
"HAL:DMP six axis rate %.2f Hz", 1000000000.f / wanted);
} else if (!(featureMask & INV_DMP_PED_QUATERNION)){
LOGV_IF(ENG_VERBOSE, "Toggle back to normal 6 axis");
if (mEnabled & (1 << GameRotationVector) && checkLPQRateSupported()) {
enableLPQuaternion(1);
}
enable6AxisQuaternion(0);
} else {
enable6AxisQuaternion(0);
}
/* TODO: This may make a come back some day */
/* write not to overflow hardware FIFO if flag is set */
/*if (flags & (1 << SENSORS_BATCH_WAKE_UPON_FIFO_FULL)) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.batchmode_wake_fifo_full_on, getTimestamp());
if (write_sysfs_int(mpu.batchmode_wake_fifo_full_on, 0) < 0) {
LOGE("HAL:ERR can't write batchmode_wake_fifo_full_on");
}
}*/
/* write required timeout to sysfs */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %lld > %s (%lld)",
timeoutInMs, mpu.batchmode_timeout, getTimestamp());
if (write_sysfs_int(mpu.batchmode_timeout, timeoutInMs) < 0) {
LOGE("HAL:ERR can't write batchmode_timeout");
}
if (batchMode == 1) {
// enable DMP
res = onDmp(1);
if (res < 0) {
return res;
}
// set batch rates
if (setBatchDataRates() < 0) {
LOGE("HAL:ERR can't set batch data rates");
}
// default fifo rate to 200Hz
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
200, mpu.gyro_fifo_rate, getTimestamp());
if (write_sysfs_int(mpu.gyro_fifo_rate, 200) < 0) {
res = -1;
LOGE("HAL:ERR can't set DMP rate to 200Hz");
return res;
}
} else {
if ((mFeatureActiveMask == 0) && !(mEnabled & VIRTUAL_SENSOR_ALL_MASK)) {
// disable DMP
res = onDmp(0);
if (res < 0) {
return res;
}
/*if (resetDataRates() < 0) {
LOGE("HAL:ERR can't reset output rate back to original setting");
}*/
}
/* reset sensor rate */
if (resetDataRates() < 0) {
LOGE("HAL:ERR can't reset output rate back to original setting");
}
}
if (enabled_sensors || mFeatureActiveMask) {
masterEnable(1);
}
return res;
}
int MPLSensor::flush(int handle)
{
VFUNC_LOG;
int res = 0;
android::String8 sname;
int what = -1;
/* TODO: return zero if no data in FIFO */
getHandle(handle, what, sname);
if (uint32_t(what) >= NumSensors) {
LOGE("HAL:flush - what=%d is invalid", what);
return -EINVAL;
}
if (((what != StepDetector) && (!(mEnabled & (1 << what)))) ||
((what == StepDetector) && !(mFeatureActiveMask & INV_DMP_PEDOMETER))) {
LOGE("HAL: flush - sensor %s not enabled", sname.string());
return -EINVAL;
}
if(!(mBatchEnabled & (1 << what))) {
LOGE("HAL:flush - batch mode not enabled for sensor %s", sname.string());
return 0;
}
LOGV_IF(PROCESS_VERBOSE, "HAL:flush - sensor %s (handle %d)", sname.string(), handle);
/*write sysfs */
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:cat %s (%lld)",
mpu.flush_batch, getTimestamp());
read_sysfs_int(mpu.flush_batch, &res);
if (res < 0) {
LOGE("HAL:ERR can't read flush_batch");
return -1;
}
if (res == 0) {
LOGI("HAL: flush - no data in FIFO");
}
mFlushEnabled = handle;
LOGV_IF(ENG_VERBOSE, "HAl:flush - mFlushEnabled=%d", mFlushEnabled);
mFlushBatchSet = 0;
return res;
}
int MPLSensor::computeBatchDataOutput()
{
VFUNC_LOG;
int featureMask = 0;
if (mBatchEnabled == 0)
return 0;//h
uint32_t hardwareSensorMask = (1 << Gyro)
| (1 << RawGyro)
| (1 << Accelerometer)
| (1 << MagneticField)
| (1 << RawMagneticField)
| (1 << Pressure);
LOGV_IF(ENG_VERBOSE, "hardwareSensorMask = 0x%0x, mBatchEnabled = 0x%0x",
hardwareSensorMask, mBatchEnabled);
if (mBatchEnabled & (1 << StepDetector)) {
if (mBatchEnabled & (1 << GameRotationVector)) {
if ((mBatchEnabled & hardwareSensorMask)) {
featureMask |= INV_DMP_6AXIS_QUATERNION;//a
featureMask |= INV_DMP_PED_INDICATOR;
} else {
featureMask |= INV_DMP_PED_QUATERNION; //b
featureMask |= INV_DMP_PED_INDICATOR; //always piggy back a bit
}
} else {
if (mBatchEnabled & hardwareSensorMask) {
featureMask |= INV_DMP_PED_INDICATOR; //c
} else {
featureMask |= INV_DMP_PED_STANDALONE; //d
featureMask |= INV_DMP_PED_INDICATOR; //required for standalone
}
}
} else if (mBatchEnabled & (1 << GameRotationVector)) {
featureMask |= INV_DMP_6AXIS_QUATERNION; //e,f
} else {
LOGV_IF(ENG_VERBOSE,
"HAL:computeBatchDataOutput: featuerMask=0x%x", featureMask);
return 0; //g
}
LOGV_IF(ENG_VERBOSE,
"HAL:computeBatchDataOutput: featuerMask=0x%x", featureMask);
return featureMask;
}
int MPLSensor::getDmpPedometerFd()
{
VFUNC_LOG;
LOGV_IF(EXTRA_VERBOSE, "getDmpPedometerFd returning %d", dmp_pedometer_fd);
return dmp_pedometer_fd;
}
/* @param [in] : outputType = 1 --derive from ped_q */
/* outputType = 0 --derive from IRQ */
int MPLSensor::readDmpPedometerEvents(sensors_event_t* data, int count,
int32_t id, int32_t type, int outputType)
{
VFUNC_LOG;
char dummy[4];
FILE *fp;
uint64_t stepCount = 0;
int numEventReceived = 0;
if((mDmpStepCountEnabled || mDmpPedometerEnabled) && count > 0) {
/* handles return event */
sensors_event_t temp;
LOGI_IF(EXTRA_VERBOSE, "HAL: Read Pedometer Event ID=%d", id);
temp.version = sizeof(sensors_event_t);
temp.sensor = id;
temp.type = type;
temp.acceleration.status
= SENSOR_STATUS_UNRELIABLE;
/* sensors.h specified to return 1.0 */
if(id == ID_P) {
temp.data[0] = 1;
temp.data[1] = 0.f;
temp.data[2] = 0.f;
} else {
fp = fopen(mpu.pedometer_steps, "r");
if (fp == NULL) {
LOGE("HAL:cannot open pedometer_steps");
} else{
if (fscanf(fp, "%lld\n", &stepCount) < 0 || fclose(fp) < 0) {
LOGE("HAL:cannot read pedometer_steps");
return 0;
}
}
/* return onChange only*/
if (stepCount == mLastStepCount) {
return 0;
}
/* TODO: framework needs to support 64-bit */
#ifdef TESTING
temp.data[0] = (float)stepCount;
#else
temp.u64.step_counter = stepCount;
#endif
mLastStepCount = stepCount;
}
if (!outputType) {
struct timespec ts;
clock_gettime(CLOCK_MONOTONIC, &ts) ;
temp.timestamp = (int64_t)ts.tv_sec * 1000000000 + ts.tv_nsec;
}
*data++ = temp;
count--;
numEventReceived++;
}
if (!outputType) {
// read dummy data per driver's request
// only required if actual irq is issued
read(dmp_pedometer_fd, dummy, 4);
} else {
return 1;
}
return numEventReceived;
}
int MPLSensor::getDmpSignificantMotionFd()
{
VFUNC_LOG;
LOGV_IF(EXTRA_VERBOSE, "getDmpSignificantMotionFd returning %d",
dmp_sign_motion_fd);
return dmp_sign_motion_fd;
}
int MPLSensor::readDmpSignificantMotionEvents(sensors_event_t* data, int count)
{
VFUNC_LOG;
char dummy[4];
int significantMotion;
FILE *fp;
#if 0
int res = 0;
int sensors = mEnabled;
#endif
int numEventReceived = 0;
/* Technically this step is not necessary for now */
/* In the future, we may have meaningful values */
fp = fopen(mpu.event_smd, "r");
if (fp == NULL) {
LOGE("HAL:cannot open event_smd");
return 0;
} else {
if (fscanf(fp, "%d\n", &significantMotion) < 0 || fclose(fp) < 0) {
LOGE("HAL:cannot read event_smd");
}
}
if(mDmpSignificantMotionEnabled && count > 0) {
/* By implementation, smd is disabled once an event is triggered */
sensors_event_t temp;
/* Handles return event */
LOGI("HAL: SMD detected");
int update = smHandler(&temp);
if (update && count > 0) {
*data++ = temp;
count--;
numEventReceived++;
mDmpSignificantMotionEnabled = 0;
mFeatureActiveMask &= ~INV_DMP_SIGNIFICANT_MOTION;
#if 0
if(mFeatureActiveMask == 0 || sensors == 0) {
LOGI("dmp off");
// disable DMP
masterEnable(0);
res = onDmp(0);
if (res < 0)
return res;
// disable accel engine
if (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_ACCEL)) {
res = enableAccel(0);
if (res < 0)
return res;
}
}
#endif
}
}
// read dummy data per driver's request
read(dmp_sign_motion_fd, dummy, 4);
return numEventReceived;
}
int MPLSensor::enableDmpSignificantMotion(int en)
{
VFUNC_LOG;
int res = 0;
int enabled_sensors = mEnabled;
if (isMpuNonDmp())
return res;
// reset master enable
res = masterEnable(0);
if (res < 0)
return res;
//Toggle significant montion detection
if(en) {
LOGV_IF(ENG_VERBOSE, "HAL:Enabling Significant Motion");
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
1, mpu.smd_enable, getTimestamp());
if (write_sysfs_int(mpu.smd_enable, 1) < 0) {
LOGE("HAL:ERR can't write DMP smd_enable");
res = -1; //Indicate an err
}
// enable DMP
res = onDmp(1);
if (res < 0)
return res;
// set DMP rate to 200Hz
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
200, mpu.accel_fifo_rate, getTimestamp());
if (write_sysfs_int(mpu.accel_fifo_rate, 200) < 0) {
res = -1;
LOGE("HAL:ERR can't set rate to 200Hz");
return res;
}
// enable accel engine
res = enableAccel(1);
if (res < 0)
return res;
// disable accel FIFO
if (!(mLocalSensorMask & mMasterSensorMask & INV_THREE_AXIS_ACCEL)) {
res = turnOffAccelFifo();
if (res < 0)
return res;
}
mFeatureActiveMask |= INV_DMP_SIGNIFICANT_MOTION;
}
else {
LOGV_IF(ENG_VERBOSE, "HAL:Disabling Significant Motion");
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
0, mpu.smd_enable, getTimestamp());
if (write_sysfs_int(mpu.smd_enable, 0) < 0) {
LOGE("HAL:ERR write DMP smd_enable");
}
mFeatureActiveMask &= ~INV_DMP_SIGNIFICANT_MOTION;
// disable DMP
if (mFeatureActiveMask == 0) {
res = onDmp(0);
if (res < 0)
return res;
// disable accel engine
if (!(mLocalSensorMask & mMasterSensorMask
& INV_THREE_AXIS_ACCEL)) {
res = enableAccel(0);
if (res < 0)
return res;
}
}
if(enabled_sensors) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
en, mpu.dmp_event_int_on, getTimestamp());
if (write_sysfs_int(mpu.dmp_event_int_on, en) < 0) {
res = -1;
LOGE("HAL:ERR can't enable DMP event interrupt");
}
}
}
if(en || enabled_sensors || mFeatureActiveMask) {
res = masterEnable(1);
}
return res;
}
void MPLSensor::setInitial6QuatValue()
{
VFUNC_LOG;
if (!mInitial6QuatValueAvailable)
return;
/* convert to unsigned char array */
size_t length = 16;
unsigned char quat[16];
convert_long_to_hex_char(mInitial6QuatValue, quat, 4);
/* write to sysfs */
LOGV_IF(EXTRA_VERBOSE, "HAL:six axis q value: %s", mpu.six_axis_q_value);
FILE* fptr = fopen(mpu.six_axis_q_value, "w");
if(fptr == NULL) {
LOGE("HAL:could not open six_axis_q_value");
} else {
if (fwrite(quat, 1, length, fptr) != length || fclose(fptr) < 0) {
LOGE("HAL:write six axis q value failed");
} else {
LOGI("!!!! write dmp 6 axis !!!");
mInitial6QuatValueAvailable = 0;
}
}
return;
}
int MPLSensor::writeSignificantMotionParams(bool toggleEnable,
uint32_t delayThreshold1,
uint32_t delayThreshold2,
uint32_t motionThreshold)
{
VFUNC_LOG;
int res = 0;
// Turn off enable
if (toggleEnable) {
masterEnable(0);
}
// Write supplied values
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
delayThreshold1, mpu.smd_delay_threshold, getTimestamp());
res = write_sysfs_int(mpu.smd_delay_threshold, delayThreshold1);
if (res == 0) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
delayThreshold2, mpu.smd_delay_threshold2, getTimestamp());
res = write_sysfs_int(mpu.smd_delay_threshold2, delayThreshold2);
}
if (res == 0) {
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %d > %s (%lld)",
motionThreshold, mpu.smd_threshold, getTimestamp());
res = write_sysfs_int(mpu.smd_threshold, motionThreshold);
}
// Turn on enable
if (toggleEnable) {
masterEnable(1);
}
return res;
}
/* set batch data rate */
/* this function should be optimized */
int MPLSensor::setBatchDataRates()
{
VFUNC_LOG;
int res = 0;
int tempFd = -1;
int64_t gyroRate;
int64_t accelRate;
int64_t compassRate;
int64_t pressureRate;
int64_t quatRate;
int mplGyroRate;
int mplAccelRate;
int mplCompassRate;
int mplQuatRate;
#ifdef ENABLE_MULTI_RATE
/* take care of case where only one type of gyro sensors or compass sensors is turned on */
gyroRate = mBatchDelays[Gyro] < mBatchDelays[RawGyro] ? mBatchDelays[Gyro] : mBatchDelays[RawGyro];
accelRate = mBatchDelays[Accelerometer];
compassRate = mBatchDelays[MagneticField] < mBatchDelays[RawMagneticField] ? mBatchDelays[MagneticField] : mBatchDelays[RawMagneticField];
pressureRate = mBatchDelays[Pressure];
if ((mFeatureActiveMask & INV_DMP_PED_QUATERNION) ||
(mFeatureActiveMask & INV_DMP_6AXIS_QUATERNION)) {
quatRate = mBatchDelays[GameRotationVector];
mplQuatRate = (int) quatRate / 1000LL;
inv_set_quat_sample_rate(mplQuatRate);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL quat sample rate: (mpl)=%d us (mpu)=%.2f Hz", mplQuatRate,
1000000000.f / quatRate );
getDmpRate(&quatRate);
}
mplGyroRate = (int) gyroRate / 1000LL;
mplAccelRate = (int) accelRate / 1000LL;
mplCompassRate = (int) compassRate / 1000LL;
/* set rate in MPL */
/* compass can only do 100Hz max */
inv_set_gyro_sample_rate(mplGyroRate);
inv_set_accel_sample_rate(mplAccelRate);
inv_set_compass_sample_rate(mplCompassRate);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL gyro sample rate: (mpl)=%d us (mpu)=%.2f Hz", mplGyroRate, 1000000000.f / gyroRate);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL accel sample rate: (mpl)=%d us (mpu)=%.2f Hz", mplAccelRate, 1000000000.f / accelRate);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL compass sample rate: (mpl)=%d us (mpu)=%.2f Hz", mplCompassRate, 1000000000.f / compassRate);
#else
/* search the minimum delay requested across all enabled sensors */
int64_t wanted = 1000000000LL;
for (int i = 0; i < NumSensors; i++) {
if (mBatchEnabled & (1 << i)) {
int64_t ns = mBatchDelays[i];
wanted = wanted < ns ? wanted : ns;
}
}
gyroRate = wanted;
accelRate = wanted;
compassRate = wanted;
pressureRate = wanted;
#endif
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / gyroRate, mpu.gyro_rate,
getTimestamp());
tempFd = open(mpu.gyro_rate, O_RDWR);
res = write_attribute_sensor(tempFd, 1000000000.f / gyroRate);
if(res < 0) {
LOGE("HAL:GYRO update delay error");
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / accelRate, mpu.accel_rate,
getTimestamp());
tempFd = open(mpu.accel_rate, O_RDWR);
res = write_attribute_sensor(tempFd, 1000000000.f / accelRate);
LOGE_IF(res < 0, "HAL:ACCEL update delay error");
if (compassRate < mCompassSensor->getMinDelay() * 1000LL) {
compassRate = mCompassSensor->getMinDelay() * 1000LL;
}
mCompassSensor->setDelay(ID_M, compassRate);
pressureRate = mDelays[Pressure];
mPressureSensor->setDelay(ID_PS, pressureRate);
return res;
}
/* Set sensor rate */
/* this function should be optimized */
int MPLSensor::resetDataRates()
{
VFUNC_LOG;
int res = 0;
int tempFd = -1;
int64_t wanted = 1000000000LL;
int64_t gyroRate;
int64_t accelRate;
int64_t compassRate;
int64_t pressureRate;
/* TODO: support multi-rate in dmp off mode */
if (!mEnabled) {
LOGV_IF(ENG_VERBOSE, "skip resetDataRates");
return 0;
}
/* search the minimum delay requested across all enabled sensors */
/* skip setting rates if it is not changed */
for (int i = 0; i < NumSensors; i++) {
if (mEnabled & (1 << i)) {
int64_t ns = mDelays[i];
if ((wanted == ns) && (i != Pressure)) {
LOGV_IF(ENG_VERBOSE, "skip resetDataRates");
return 0;
}
LOGV_IF(ENG_VERBOSE, "resetDataRates - mDelays[%d]=%lld", i, mDelays[i]);
wanted = wanted < ns ? wanted : ns;
}
}
gyroRate = wanted;
accelRate = wanted;
compassRate = wanted;
pressureRate = wanted;
/* set mpl data rate */
inv_set_gyro_sample_rate((int)gyroRate/1000LL);
inv_set_accel_sample_rate((int)accelRate/1000LL);
inv_set_compass_sample_rate((int)compassRate/1000LL);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL gyro sample rate: (mpl)=%lld us (mpu)=%.2f Hz",
gyroRate/1000LL, 1000000000.f / gyroRate);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL accel sample rate: (mpl)=%lld us (mpu)=%.2f Hz",
accelRate/1000LL, 1000000000.f / accelRate);
LOGV_IF(PROCESS_VERBOSE,
"HAL:MPL compass sample rate: (mpl)=%lld us (mpu)=%.2f Hz",
compassRate/1000LL, 1000000000.f / compassRate);
/* reset dmp rate */
getDmpRate (&wanted);
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / wanted, mpu.gyro_fifo_rate,
getTimestamp());
tempFd = open(mpu.gyro_fifo_rate, O_RDWR);
res = write_attribute_sensor(tempFd, 1000000000.f / wanted);
LOGE_IF(res < 0, "HAL:sampling frequency update delay error");
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / gyroRate, mpu.gyro_rate,
getTimestamp());
tempFd = open(mpu.gyro_rate, O_RDWR);
res = write_attribute_sensor(tempFd, 1000000000.f / gyroRate);
if(res < 0) {
LOGE("HAL:GYRO update delay error");
}
LOGV_IF(SYSFS_VERBOSE, "HAL:sysfs:echo %.0f > %s (%lld)",
1000000000.f / accelRate, mpu.accel_rate,
getTimestamp());
tempFd = open(mpu.accel_rate, O_RDWR);
res = write_attribute_sensor(tempFd, 1000000000.f / accelRate);
LOGE_IF(res < 0, "HAL:ACCEL update delay error");
if (compassRate < mCompassSensor->getMinDelay() * 1000LL) {
compassRate = mCompassSensor->getMinDelay() * 1000LL;
}
mCompassSensor->setDelay(ID_M, compassRate);
mPressureSensor->setDelay(ID_PS, pressureRate);
return res;
}
void MPLSensor::initBias()
{
VFUNC_LOG;
LOGV_IF(ENG_VERBOSE, "HAL:inititalize dmp and device offsets to 0");
if(write_attribute_sensor_continuous(accel_x_dmp_bias_fd, 0) < 0) {
LOGE("HAL:Error writing to accel_x_dmp_bias");
}
if(write_attribute_sensor_continuous(accel_y_dmp_bias_fd, 0) < 0) {
LOGE("HAL:Error writing to accel_y_dmp_bias");
}
if(write_attribute_sensor_continuous(accel_z_dmp_bias_fd, 0) < 0) {
LOGE("HAL:Error writing to accel_z_dmp_bias");
}
if(write_attribute_sensor_continuous(accel_x_offset_fd, 0) < 0) {
LOGE("HAL:Error writing to accel_x_offset");
}
if(write_attribute_sensor_continuous(accel_y_offset_fd, 0) < 0) {
LOGE("HAL:Error writing to accel_y_offset");
}
if(write_attribute_sensor_continuous(accel_z_offset_fd, 0) < 0) {
LOGE("HAL:Error writing to accel_z_offset");
}
if(write_attribute_sensor_continuous(gyro_x_dmp_bias_fd, 0) < 0) {
LOGE("HAL:Error writing to gyro_x_dmp_bias");
}
if(write_attribute_sensor_continuous(gyro_y_dmp_bias_fd, 0) < 0) {
LOGE("HAL:Error writing to gyro_y_dmp_bias");
}
if(write_attribute_sensor_continuous(gyro_z_dmp_bias_fd, 0) < 0) {
LOGE("HAL:Error writing to gyro_z_dmp_bias");
}
if(write_attribute_sensor_continuous(gyro_x_offset_fd, 0) < 0) {
LOGE("HAL:Error writing to gyro_x_offset");
}
if(write_attribute_sensor_continuous(gyro_y_offset_fd, 0) < 0) {
LOGE("HAL:Error writing to gyro_y_offset");
}
if(write_attribute_sensor_continuous(gyro_z_offset_fd, 0) < 0) {
LOGE("HAL:Error writing to gyro_z_offset");
}
return;
}
/*TODO: reg_dump in a separate file*/
void MPLSensor::sys_dump(bool fileMode)
{
VFUNC_LOG;
char sysfs_path[MAX_SYSFS_NAME_LEN];
char scan_element_path[MAX_SYSFS_NAME_LEN];
memset(sysfs_path, 0, sizeof(sysfs_path));
memset(scan_element_path, 0, sizeof(scan_element_path));
inv_get_sysfs_path(sysfs_path);
sprintf(scan_element_path, "%s%s", sysfs_path, "/scan_elements");
read_sysfs_dir(fileMode, sysfs_path);
read_sysfs_dir(fileMode, scan_element_path);
dump_dmp_img("/data/local/read_img.h");
return;
}