You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
117 lines
3.1 KiB
117 lines
3.1 KiB
#Uncommenting these urls would only enable |
|
#the power up auto injection and force injection(test case). |
|
#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin |
|
#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin |
|
#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin |
|
|
|
#Version check for XTRA |
|
#DISABLE = 0 |
|
#AUTO = 1 |
|
#XTRA2 = 2 |
|
#XTRA3 = 3 |
|
XTRA_VERSION_CHECK=0 |
|
|
|
# Error Estimate |
|
# _SET = 1 |
|
# _CLEAR = 0 |
|
ERR_ESTIMATE=0 |
|
|
|
#Test |
|
NTP_SERVER=time.gpsonextra.net |
|
#Asia |
|
# NTP_SERVER=asia.pool.ntp.org |
|
#Europe |
|
# NTP_SERVER=europe.pool.ntp.org |
|
#North America |
|
# NTP_SERVER=north-america.pool.ntp.org |
|
|
|
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info |
|
# 4 - Debug, 5 - Verbose |
|
# If DEBUG_LEVEL is commented, Android's logging levels will be used |
|
DEBUG_LEVEL = 3 |
|
|
|
# Intermediate position report, 1=enable, 0=disable |
|
INTERMEDIATE_POS=0 |
|
|
|
# Below bit mask configures how GPS functionalities |
|
# should be locked when user turns off GPS on Settings |
|
# Set bit 0x1 if MO GPS functionalities are to be locked |
|
# Set bit 0x2 if NI GPS functionalities are to be locked |
|
# default - non is locked for backward compatibility |
|
#GPS_LOCK = 0 |
|
|
|
# supl version 1.0 |
|
SUPL_VER=0x10000 |
|
|
|
# Emergency SUPL, 1=enable, 0=disable |
|
SUPL_ES=1 |
|
|
|
#Choose PDN for Emergency SUPL |
|
#1 - Use emergency PDN |
|
#0 - Use regular SUPL PDN for Emergency SUPL |
|
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 |
|
|
|
#SUPL_MODE is a bit mask set in config.xml per carrier by default. |
|
#If it is uncommented here, this value will over write the value from |
|
#config.xml. |
|
#MSA=0X2 |
|
#MSB=0X1 |
|
#SUPL_MODE= |
|
|
|
# GPS Capabilities bit mask |
|
# SCHEDULING = 0x01 |
|
# MSB = 0x02 |
|
# MSA = 0x04 |
|
# ON_DEMAND_TIME = 0x10 |
|
# GEOFENCE = 0x20 |
|
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE |
|
CAPABILITIES=0x37 |
|
|
|
# Accuracy threshold for intermediate positions |
|
# less accurate positions are ignored, 0 for passing all positions |
|
# ACCURACY_THRES=5000 |
|
|
|
################################ |
|
##### AGPS server settings ##### |
|
################################ |
|
|
|
# FOR SUPL SUPPORT, set the following |
|
# SUPL_HOST=supl.host.com or IP |
|
# SUPL_PORT=1234 |
|
|
|
# FOR C2K PDE SUPPORT, set the following |
|
# C2K_HOST=c2k.pde.com or IP |
|
# C2K_PORT=1234 |
|
|
|
# Bitmask of slots that are available |
|
# for write/install to, where 1s indicate writable, |
|
# and the default value is 0 where no slots |
|
# are writable. For example, AGPS_CERT_WRITABLE_MASK |
|
# of b1000001010 makes 3 slots available |
|
# and the remaining 7 slots unwritable. |
|
#AGPS_CERT_WRITABLE_MASK=0 |
|
|
|
#################################### |
|
# LTE Positioning Profile Settings |
|
#################################### |
|
# 0: Enable RRLP on LTE(Default) |
|
# 1: Enable LPP_User_Plane on LTE |
|
# 2: Enable LPP_Control_Plane |
|
# 3: Enable both LPP_User_Plane and LPP_Control_Plane |
|
LPP_PROFILE = 0 |
|
|
|
################################ |
|
# EXTRA SETTINGS |
|
################################ |
|
# NMEA provider (1=Modem Processor, 0=Application Processor) |
|
NMEA_PROVIDER=0 |
|
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) |
|
SGLTE_TARGET=0 |
|
|
|
################################################## |
|
# Select Positioning Protocol on A-GLONASS system |
|
################################################## |
|
# 0x1: RRC CPlane |
|
# 0x2: RRLP UPlane |
|
# 0x4: LLP Uplane |
|
A_GLONASS_POS_PROTOCOL_SELECT = 0
|
|
|