PL286/system/bt/device/include/interop.h

/******************************************************************************
 *
 *  Copyright (C) 2015 Google, Inc.
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

#pragma once

#include <stdbool.h>

#include "raw_address.h"

static const char INTEROP_MODULE[] = "interop_module";

// NOTE:
// Only add values at the end of this enum and do NOT delete values
// as they may be used in dynamic device configuration.
typedef enum {
  // Disable secure connections
  // This is for pre BT 4.1/2 devices that do not handle secure mode
  // very well.
  INTEROP_DISABLE_LE_SECURE_CONNECTIONS = 0,

  // Some devices have proven problematic during the pairing process, often
  // requiring multiple retries to complete pairing. To avoid degrading the user
  // experience for those devices, automatically re-try pairing if page
  // timeouts are received during pairing.
  INTEROP_AUTO_RETRY_PAIRING,

  // Devices requiring this workaround do not handle Bluetooth Absolute Volume
  // control correctly, leading to undesirable (potentially harmful) volume
  // levels or general lack of controlability.
  INTEROP_DISABLE_ABSOLUTE_VOLUME,

  // Disable automatic pairing with headsets/car-kits
  // Some car kits do not react kindly to a failed pairing attempt and
  // do not allow immediate re-pairing. Blacklist these so that the initial
  // pairing attempt makes it to the user instead.
  INTEROP_DISABLE_AUTO_PAIRING,

  // Use a fixed pin for specific keyboards
  // Keyboards should use a variable pin at all times. However, some keyboards
  // require a fixed pin of all 0000. This workaround enables auto pairing for
  // those keyboards.
  INTEROP_KEYBOARD_REQUIRES_FIXED_PIN,

  // Some headsets have audio jitter issues because of increased
  // re-transmissions as the 3 Mbps packets have a lower link margin, and are
  // more prone to interference. We can disable 3DH packets (use only 2DH
  // packets) for the ACL link to improve sensitivity when streaming A2DP audio
  // to the headset. Air sniffer logs show reduced re-transmissions after
  // switching to 2DH packets.

  // Disable 3Mbps packets and use only 2Mbps packets for ACL links when
  // streaming audio.
  INTEROP_2MBPS_LINK_ONLY,

  // Do not use supervision timeout value received from preferred connection
  // parameters, use 3s instead. Use with HID only.
  INTEROP_HID_PREF_CONN_SUP_TIMEOUT_3S,

  // Do not send service changed indications (GATT client).
  // This should be removed after the characteristic is implmeented b/62088395.
  INTEROP_GATTC_NO_SERVICE_CHANGED_IND,

  // Do not use AVDTP RECONFIGURE when reconfiguring A2DP streams.
  // Some A2DP Sink devices report SUCCESS to the AVDTP RECONFIGURE command,
  // but fail to play the reconfigured audio stream.
  INTEROP_DISABLE_AVDTP_RECONFIGURE,

  // Create dynamic blacklist to disable role switch.
  // Some car kits indicate that role switch is supported, but then reject
  // role switch attempts. After rejecting several role switch attempts,
  // such car kits will go into bad state.
  INTEROP_DYNAMIC_ROLE_SWITCH,

  // Disable role switch for headsets/car-kits.
  // Some car kits allow role switch but when the Phone initiates role switch,
  // the Remote device will go into bad state that will lead to LMP time out.
  INTEROP_DISABLE_ROLE_SWITCH
} interop_feature_t;

// Check if a given |addr| matches a known interoperability workaround as
// identified by the |interop_feature_t| enum. This API is used for simple
// address based lookups where more information is not available. No
// look-ups or random address resolution are performed on |addr|.
bool interop_match_addr(const interop_feature_t feature,
                        const RawAddress* addr);

// Check if a given remote device |name| matches a known workaround.
// Name comparisons are case sensitive and do not allow for partial matches.
// If |name| is "TEST" and a workaround exists for "TESTING", then this function
// will return false. But, if |name| is "TESTING" and a workaround exists for
// "TEST", this function will return true.
// |name| cannot be null and must be null terminated.
bool interop_match_name(const interop_feature_t feature, const char* name);

// Add a dynamic interop database entry for a device matching the first |length|
// bytes of |addr|, implementing the workaround identified by |feature|.
// |addr| may not be null.
// |length| must be greater than 0 and less than RawAddress::kLength.
// As |interop_feature_t| is not exposed in the public API, feature must be a
// valid integer representing an option in the enum.
void interop_database_add(const uint16_t feature, const RawAddress* addr,
                          size_t length);

// Clear the dynamic portion of the interoperability workaround database.
void interop_database_clear(void);