sandy
/
PL286
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1 Commit
1 Branch
0 Tags
18 GiB
Tree: 99da0f2c72
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '99da0f2c72'
${ noResults }
PL286/system/bt/stack/include/avrc_api.h

708 lines
29 KiB
Raw Blame History

/******************************************************************************
*
* Copyright (C) 2006-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* nterface to AVRCP Application Programming Interface
*
******************************************************************************/
#ifndef AVRC_API_H
#define AVRC_API_H
#include "avct_api.h"
#include "avrc_defs.h"
#include "bt_target.h"
#include "sdp_api.h"
/*****************************************************************************
* constants
****************************************************************************/
/* API function return value result codes. */
/* 0 Function successful */
#define AVRC_SUCCESS AVCT_SUCCESS
/* 1 Not enough resources */
#define AVRC_NO_RESOURCES AVCT_NO_RESOURCES
/* 2 Bad handle */
#define AVRC_BAD_HANDLE AVCT_BAD_HANDLE
/* 3 PID already in use */
#define AVRC_PID_IN_USE AVCT_PID_IN_USE
/* 4 Connection not open */
#define AVRC_NOT_OPEN AVCT_NOT_OPEN
/* 5 the message length exceed the MTU of the browsing channel */
#define AVRC_MSG_TOO_BIG 5
/* 0x10 generic failure */
#define AVRC_FAIL 0x10
/* 0x11 bad parameter */
#define AVRC_BAD_PARAM 0x11
/* Control role - same as AVCT_TARGET/AVCT_CONTROL */
/* target */
#define AVRC_CT_TARGET 1
/* controller */
#define AVRC_CT_CONTROL 2
/* If conflict, allow the other side to succeed */
#define AVRC_CT_PASSIVE 4
/* Connection role */
/* initiator */
#define AVRC_CONN_INT AVCT_INT
/* Acceptor */
#define AVRC_CONN_ACP AVCT_ACP
/* AVRC CTRL events */
/* AVRC_OPEN_IND_EVT event is sent when the connection is successfully opened.
* This eventis sent in response to an AVRC_Open(). */
#define AVRC_OPEN_IND_EVT 0
/* AVRC_CLOSE_IND_EVT event is sent when a connection is closed.
* This event can result from a call to AVRC_Close() or when the peer closes
* the connection. It is also sent when a connection attempted through
* AVRC_Open() fails. */
#define AVRC_CLOSE_IND_EVT 1
/* AVRC_CONG_IND_EVT event indicates that AVCTP is congested and cannot send
* any more messages. */
#define AVRC_CONG_IND_EVT 2
/* AVRC_UNCONG_IND_EVT event indicates that AVCTP is uncongested and ready to
* send messages. */
#define AVRC_UNCONG_IND_EVT 3
/* AVRC_BROWSE_OPEN_IND_EVT event is sent when the browse channel is
* successfully opened.
* This eventis sent in response to an AVRC_Open() or AVRC_OpenBrowse() . */
#define AVRC_BROWSE_OPEN_IND_EVT 4
/* AVRC_BROWSE_CLOSE_IND_EVT event is sent when a browse channel is closed.
* This event can result from a call to AVRC_Close(), AVRC_CloseBrowse() or
* when the peer closes the connection. It is also sent when a connection
* attempted through AVRC_OpenBrowse() fails. */
#define AVRC_BROWSE_CLOSE_IND_EVT 5
/* AVRC_BROWSE_CONG_IND_EVT event indicates that AVCTP browse channel is
* congested and cannot send any more messages. */
#define AVRC_BROWSE_CONG_IND_EVT 6
/* AVRC_BROWSE_UNCONG_IND_EVT event indicates that AVCTP browse channel is
* uncongested and ready to send messages. */
#define AVRC_BROWSE_UNCONG_IND_EVT 7
/* AVRC_CMD_TIMEOUT_EVT event indicates timeout waiting for AVRC command
* response from the peer */
#define AVRC_CMD_TIMEOUT_EVT 8
/* Supported categories */
#define AVRC_SUPF_CT_CAT1 0x0001 /* Category 1 */
#define AVRC_SUPF_CT_CAT2 0x0002 /* Category 2 */
#define AVRC_SUPF_CT_CAT3 0x0004 /* Category 3 */
#define AVRC_SUPF_CT_CAT4 0x0008 /* Category 4 */
#define AVRC_SUPF_CT_APP_SETTINGS 0x0010 /* Player Application Settings */
#define AVRC_SUPF_CT_GROUP_NAVI 0x0020 /* Group Navigation */
#define AVRC_SUPF_CT_BROWSE 0x0040 /* Browsing */
/* Cover Art, get image property */
#define AVRC_SUPF_CT_COVER_ART_GET_IMAGE_PROP 0x0080
/* Cover Art, get image */
#define AVRC_SUPF_CT_COVER_ART_GET_IMAGE 0x0100
/* Cover Art, get Linked Thumbnail */
#define AVRC_SUPF_CT_COVER_ART_GET_THUMBNAIL 0x0200
#define AVRC_SUPF_TG_CAT1 0x0001 /* Category 1 */
#define AVRC_SUPF_TG_CAT2 0x0002 /* Category 2 */
#define AVRC_SUPF_TG_CAT3 0x0004 /* Category 3 */
#define AVRC_SUPF_TG_CAT4 0x0008 /* Category 4 */
#define AVRC_SUPF_TG_APP_SETTINGS 0x0010 /* Player Application Settings */
#define AVRC_SUPF_TG_GROUP_NAVI 0x0020 /* Group Navigation */
#define AVRC_SUPF_TG_BROWSE 0x0040 /* Browsing */
#define AVRC_SUPF_TG_MULTI_PLAYER 0x0080 /* Muliple Media Player */
#define AVRC_SUPF_TG_PLAYER_COVER_ART 0x0100 /* Cover Art */
#define AVRC_META_SUCCESS AVRC_SUCCESS
#define AVRC_META_FAIL AVRC_FAIL
#define AVRC_METADATA_CMD 0x0000
#define AVRC_METADATA_RESP 0x0001
/*****************************************************************************
* data type definitions
****************************************************************************/
/* This data type is used in AVRC_FindService() to initialize the SDP database
* to hold the result service search. */
typedef struct {
uint32_t db_len; /* Length, in bytes, of the discovery database */
tSDP_DISCOVERY_DB* p_db; /* Pointer to the discovery database */
uint16_t num_attr; /* The number of attributes in p_attrs */
uint16_t* p_attrs; /* The attributes filter. If NULL, AVRCP API sets the
* attribute filter
* to be ATTR_ID_SERVICE_CLASS_ID_LIST,
* ATTR_ID_BT_PROFILE_DESC_LIST,
* ATTR_ID_SUPPORTED_FEATURES, ATTR_ID_SERVICE_NAME and
* ATTR_ID_PROVIDER_NAME.
* If not NULL, the input is taken as the filter. */
} tAVRC_SDP_DB_PARAMS;
/* This callback function returns service discovery information to the
* application after the AVRC_FindService() API function is called. The
* implementation of this callback function must copy the p_service_name
* and p_provider_name parameters passed to it as they are not guaranteed
* to remain after the callback function exits. */
typedef void(tAVRC_FIND_CBACK)(uint16_t status);
/* This is the control callback function. This function passes events
* listed in Table 20 to the application. */
typedef void(tAVRC_CTRL_CBACK)(uint8_t handle, uint8_t event, uint16_t result,
const RawAddress* peer_addr);
/* This is the message callback function. It is executed when AVCTP has
* a message packet ready for the application. The implementation of this
* callback function must copy the tAVRC_MSG structure passed to it as it
* is not guaranteed to remain after the callback function exits. */
typedef void(tAVRC_MSG_CBACK)(uint8_t handle, uint8_t label, uint8_t opcode,
tAVRC_MSG* p_msg);
typedef struct {
tAVRC_CTRL_CBACK* p_ctrl_cback; /* pointer to application control callback */
tAVRC_MSG_CBACK* p_msg_cback; /* pointer to application message callback */
uint32_t company_id; /* the company ID */
uint8_t conn; /* Connection role (Initiator/acceptor) */
uint8_t control; /* Control role (Control/Target) */
} tAVRC_CONN_CB;
typedef struct {
uint8_t handle;
uint8_t label;
uint8_t msg_mask;
} tAVRC_PARAM;
/*****************************************************************************
* external function declarations
****************************************************************************/
/******************************************************************************
*
* Function AVRC_AddRecord
*
* Description This function is called to build an AVRCP SDP record.
* Prior to calling this function the application must
* call SDP_CreateRecord() to create an SDP record.
*
* Input Parameters:
* service_uuid: Indicates
* TG(UUID_SERVCLASS_AV_REM_CTRL_TARGET)
* or CT(UUID_SERVCLASS_AV_REMOTE_CONTROL)
*
* p_service_name: Pointer to a null-terminated character
* string containing the service name.
* If service name is not used set this to NULL.
*
* p_provider_name: Pointer to a null-terminated character
* string containing the provider name.
* If provider name is not used set this to NULL.
*
* categories: Supported categories.
*
* sdp_handle: SDP handle returned by SDP_CreateRecord().
*
* Output Parameters:
* None.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_NO_RESOURCES if not enough resources to build the SDP
* record.
*
*****************************************************************************/
extern uint16_t AVRC_AddRecord(uint16_t service_uuid,
const char* p_service_name,
const char* p_provider_name, uint16_t categories,
uint32_t sdp_handle, bool browse_supported,
uint16_t profile_version);
/******************************************************************************
*
* Function AVRC_FindService
*
* Description This function is called by the application to perform
* service discovery and retrieve AVRCP SDP record information
* from a peer device. Information is returned for the first
* service record found on the server that matches the service
* UUID. The callback function will be executed when service
* discovery is complete. There can only be one outstanding
* call to AVRC_FindService() at a time; the application must
* wait for the callback before it makes another call to the
* function. The application is responsible for allocating
* memory for the discovery database. It is recommended that
* the size of the discovery database be at least 300 bytes.
* The application can deallocate the memory after the
* callback function has executed.
*
* Input Parameters:
* service_uuid: Indicates
* TG(UUID_SERVCLASS_AV_REM_CTRL_TARGET)
* or CT(UUID_SERVCLASS_AV_REMOTE_CONTROL)
*
* bd_addr: BD address of the peer device.
*
* p_db: SDP discovery database parameters.
*
* p_cback: Pointer to the callback function.
*
* Output Parameters:
* None.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_PARAMS if discovery database parameters are
* invalid.
* AVRC_NO_RESOURCES if there are not enough resources to
* perform the service search.
*
*****************************************************************************/
extern uint16_t AVRC_FindService(uint16_t service_uuid,
const RawAddress& bd_addr,
tAVRC_SDP_DB_PARAMS* p_db,
tAVRC_FIND_CBACK* p_cback);
/******************************************************************************
*
* Function AVRC_Open
*
* Description This function is called to open a connection to AVCTP.
* The connection can be either an initiator or acceptor, as
* determined by the p_ccb->stream parameter.
* The connection can be a target, a controller or for both
* roles, as determined by the p_ccb->control parameter.
* By definition, a target connection is an acceptor connection
* that waits for an incoming AVCTP connection from the peer.
* The connection remains available to the application until
* the application closes it by calling AVRC_Close(). The
* application does not need to reopen the connection after an
* AVRC_CLOSE_IND_EVT is received.
*
* Input Parameters:
* p_ccb->company_id: Company Identifier.
*
* p_ccb->p_ctrl_cback: Pointer to the control callback
* function.
*
* p_ccb->p_msg_cback: Pointer to the message callback
* function.
*
* p_ccb->conn: AVCTP connection role. This is set to
* AVCTP_INT for initiator connections and AVCTP_ACP
* for acceptor connections.
*
* p_ccb->control: Control role. This is set to
* AVRC_CT_TARGET for target connections, AVRC_CT_CONTROL
* for control connections or
* (AVRC_CT_TARGET|AVRC_CT_CONTROL) for connections that
* support both roles.
*
* peer_addr: BD address of peer device. This value is
* only used for initiator connections; for acceptor
* connections it can be set to NULL.
*
* Output Parameters:
* p_handle: Pointer to handle. This parameter is only
* valid if AVRC_SUCCESS is returned.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_NO_RESOURCES if there are not enough resources to open
* the connection.
*
*****************************************************************************/
extern uint16_t AVRC_Open(uint8_t* p_handle, tAVRC_CONN_CB* p_ccb,
const RawAddress& peer_addr);
/******************************************************************************
*
* Function AVRC_Close
*
* Description Close a connection opened with AVRC_Open().
* This function is called when the
* application is no longer using a connection.
*
* Input Parameters:
* handle: Handle of this connection.
*
* Output Parameters:
* None.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_HANDLE if handle is invalid.
*
*****************************************************************************/
extern uint16_t AVRC_Close(uint8_t handle);
/******************************************************************************
*
* Function AVRC_OpenBrowse
*
* Description This function is called to open a browsing connection to
* AVCTP. The connection can be either an initiator or
* acceptor, as determined by the conn_role.
* The handle is returned by a previous call to AVRC_Open.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_NO_RESOURCES if there are not enough resources to open
* the connection.
*
*****************************************************************************/
extern uint16_t AVRC_OpenBrowse(uint8_t handle, uint8_t conn_role);
/******************************************************************************
*
* Function AVRC_CloseBrowse
*
* Description Close a connection opened with AVRC_OpenBrowse().
* This function is called when the
* application is no longer using a connection.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_HANDLE if handle is invalid.
*
*****************************************************************************/
extern uint16_t AVRC_CloseBrowse(uint8_t handle);
/******************************************************************************
*
* Function AVRC_MsgReq
*
* Description This function is used to send the AVRCP byte stream in p_pkt
* down to AVCTP.
*
* It is expected that:
* p_pkt->offset is at least AVCT_MSG_OFFSET
* p_pkt->layer_specific is AVCT_DATA_CTRL or AVCT_DATA_BROWSE
* p_pkt->event is AVRC_OP_VENDOR, AVRC_OP_PASS_THRU or
* AVRC_OP_BROWSING
* The above BT_HDR settings are set by the AVRC_Bld*
* functions.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_HANDLE if handle is invalid.
*
*****************************************************************************/
extern uint16_t AVRC_MsgReq(uint8_t handle, uint8_t label, uint8_t ctype,
BT_HDR* p_pkt);
/******************************************************************************
*
* Function AVRC_UnitCmd
*
* Description Send a UNIT INFO command to the peer device. This
* function can only be called for controller role connections.
* Any response message from the peer is passed back through
* the tAVRC_MSG_CBACK callback function.
*
* Input Parameters:
* handle: Handle of this connection.
*
* label: Transaction label.
*
* Output Parameters:
* None.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_HANDLE if handle is invalid.
*
*****************************************************************************/
extern uint16_t AVRC_UnitCmd(uint8_t handle, uint8_t label);
/******************************************************************************
*
* Function AVRC_SubCmd
*
* Description Send a SUBUNIT INFO command to the peer device. This
* function can only be called for controller role connections.
* Any response message from the peer is passed back through
* the tAVRC_MSG_CBACK callback function.
*
* Input Parameters:
* handle: Handle of this connection.
*
* label: Transaction label.
*
* page: Specifies which part of the subunit type table
* is requested. For AVRCP it is typically zero.
* Value range is 0-7.
*
* Output Parameters:
* None.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_HANDLE if handle is invalid.
*
*****************************************************************************/
extern uint16_t AVRC_SubCmd(uint8_t handle, uint8_t label, uint8_t page);
/******************************************************************************
*
* Function AVRC_PassCmd
*
* Description Send a PASS THROUGH command to the peer device. This
* function can only be called for controller role connections.
* Any response message from the peer is passed back through
* the tAVRC_MSG_CBACK callback function.
*
* Input Parameters:
* handle: Handle of this connection.
*
* label: Transaction label.
*
* p_msg: Pointer to PASS THROUGH message structure.
*
* Output Parameters:
* None.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_HANDLE if handle is invalid.
*
*****************************************************************************/
extern uint16_t AVRC_PassCmd(uint8_t handle, uint8_t label,
tAVRC_MSG_PASS* p_msg);
/******************************************************************************
*
* Function AVRC_PassRsp
*
* Description Send a PASS THROUGH response to the peer device. This
* function can only be called for target role connections.
* This function must be called when a PASS THROUGH command
* message is received from the peer through the
* tAVRC_MSG_CBACK callback function.
*
* Input Parameters:
* handle: Handle of this connection.
*
* label: Transaction label. Must be the same value as
* passed with the command message in the callback
* function.
*
* p_msg: Pointer to PASS THROUGH message structure.
*
* Output Parameters:
* None.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_HANDLE if handle is invalid.
*
*****************************************************************************/
extern uint16_t AVRC_PassRsp(uint8_t handle, uint8_t label,
tAVRC_MSG_PASS* p_msg);
/******************************************************************************
*
* Function AVRC_VendorCmd
*
* Description Send a VENDOR DEPENDENT command to the peer device. This
* function can only be called for controller role connections.
* Any response message from the peer is passed back through
* the tAVRC_MSG_CBACK callback function.
*
* Input Parameters:
* handle: Handle of this connection.
*
* label: Transaction label.
*
* p_msg: Pointer to VENDOR DEPENDENT message structure.
*
* Output Parameters:
* None.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_HANDLE if handle is invalid.
*
*****************************************************************************/
extern uint16_t AVRC_VendorCmd(uint8_t handle, uint8_t label,
tAVRC_MSG_VENDOR* p_msg);
/******************************************************************************
*
* Function AVRC_VendorRsp
*
* Description Send a VENDOR DEPENDENT response to the peer device. This
* function can only be called for target role connections.
* This function must be called when a VENDOR DEPENDENT
* command message is received from the peer through the
* tAVRC_MSG_CBACK callback function.
*
* Input Parameters:
* handle: Handle of this connection.
*
* label: Transaction label. Must be the same value as
* passed with the command message in the callback
* function.
*
* p_msg: Pointer to VENDOR DEPENDENT message structure.
*
* Output Parameters:
* None.
*
* Returns AVRC_SUCCESS if successful.
* AVRC_BAD_HANDLE if handle is invalid.
*
*****************************************************************************/
extern uint16_t AVRC_VendorRsp(uint8_t handle, uint8_t label,
tAVRC_MSG_VENDOR* p_msg);
/******************************************************************************
*
* Function AVRC_SetTraceLevel
*
* Description Sets the trace level for AVRC. If 0xff is passed, the
* current trace level is returned.
*
* Input Parameters:
* new_level: The level to set the AVRC tracing to:
* 0xff-returns the current setting.
* 0-turns off tracing.
* >= 1-Errors.
* >= 2-Warnings.
* >= 3-APIs.
* >= 4-Events.
* >= 5-Debug.
*
* Returns The new trace level or current trace level if
* the input parameter is 0xff.
*
*****************************************************************************/
extern uint8_t AVRC_SetTraceLevel(uint8_t new_level);
/*******************************************************************************
*
* Function AVRC_Init
*
* Description This function is called at stack startup to allocate the
* control block (if using dynamic memory), and initializes the
* control block and tracing level.
*
* Returns void
*
******************************************************************************/
extern void AVRC_Init(void);
/*******************************************************************************
*
* Function AVRC_Ctrl_ParsCommand
*
* Description This function is used to parse cmds received for CTRL
* Currently it is for SetAbsVolume and Volume Change
* Notification..
*
* Returns AVRC_STS_NO_ERROR, if the message in p_data is parsed
* successfully.
* Otherwise, the error code defined by AVRCP 1.4
*
******************************************************************************/
extern tAVRC_STS AVRC_Ctrl_ParsCommand(tAVRC_MSG* p_msg,
tAVRC_COMMAND* p_result);
/*******************************************************************************
*
* Function AVRC_ParsCommand
*
* Description This function is used to parse the received command.
*
* Returns AVRC_STS_NO_ERROR, if the message in p_data is parsed
* successfully.
* Otherwise, the error code defined by AVRCP 1.4
*
******************************************************************************/
extern tAVRC_STS AVRC_ParsCommand(tAVRC_MSG* p_msg, tAVRC_COMMAND* p_result,
uint8_t* p_buf, uint16_t buf_len);
/*******************************************************************************
*
* Function AVRC_ParsResponse
*
* Description This function is used to parse the received response.
*
* Returns AVRC_STS_NO_ERROR, if the message in p_data is parsed
* successfully.
* Otherwise, the error code defined by AVRCP 1.4
*
******************************************************************************/
extern tAVRC_STS AVRC_ParsResponse(tAVRC_MSG* p_msg, tAVRC_RESPONSE* p_result,
uint8_t* p_buf, uint16_t buf_len);
/*******************************************************************************
*
* Function AVRC_Ctrl_ParsResponse
*
* Description This function is a parse response for AVRCP Controller.
*
* Returns AVRC_STS_NO_ERROR, if the message in p_data is parsed
* successfully.
* Otherwise, the error code defined by AVRCP 1.4
*
******************************************************************************/
extern tAVRC_STS AVRC_Ctrl_ParsResponse(tAVRC_MSG* p_msg,
tAVRC_RESPONSE* p_result,
uint8_t* p_buf, uint16_t* buf_len);
/*******************************************************************************
*
* Function AVRC_BldCommand
*
* Description This function builds the given AVRCP command to the given
* GKI buffer
*
* Returns AVRC_STS_NO_ERROR, if the command is built successfully
* Otherwise, the error code.
*
******************************************************************************/
extern tAVRC_STS AVRC_BldCommand(tAVRC_COMMAND* p_cmd, BT_HDR** pp_pkt);
/*******************************************************************************
*
* Function AVRC_BldResponse
*
* Description This function builds the given AVRCP response to the given
* GKI buffer
*
* Returns AVRC_STS_NO_ERROR, if the response is built successfully
* Otherwise, the error code.
*
******************************************************************************/
extern tAVRC_STS AVRC_BldResponse(uint8_t handle, tAVRC_RESPONSE* p_rsp,
BT_HDR** pp_pkt);
/**************************************************************************
*
* Function AVRC_IsValidAvcType
*
* Description Check if correct AVC type is specified
*
* Returns returns true if it is valid
*
*
******************************************************************************/
extern bool AVRC_IsValidAvcType(uint8_t pdu_id, uint8_t avc_type);
/*******************************************************************************
*
* Function AVRC_IsValidPlayerAttr
*
* Description Check if the given attrib value is a valid one
*
*
* Returns returns true if it is valid
*
******************************************************************************/
extern bool AVRC_IsValidPlayerAttr(uint8_t attr);
#endif /* AVRC_API_H */